Cooper Bussmann CH Series Modular Fuse Holders Class J Class J – 600 Volt 1-60A Features: • Choice of Indication: –Easy ID window to view indicator on Cooper Bussmann LPJ-(amp)SPI fuses for permanent fuse indication, even when power is disconnected. –Neon indicator is field installable or can be purchased installed from the factory. • Comes in standard 1, 2 & 3 Pole ganged assemblies where all fuses are extracted simultaneously. • Kits are available for ganging units in the field. • Meets requirements of IEC 60529 for IP-20 finger safe rating. • 35mm DIN rail and chassis (6-32 UNC Pan Head Recommended) mounting features. • Fuseholder wire ports dual wire rated from 18 to 3AWG. Specifications: Fuse Sizes Voltage Rating Amperage Rating 35 to 60A Class J 600V 600V 30A 60A Torque IP Rating 18-1AWG Single 18-3AWG Dual 75°C 35in-lbs IP-20 (Finger Safe) 18-1AWG Single 18-3AWG Dual 75°C 35in-lbs IP-20 (Finger Safe) Clip Material Tin Plated Copper Tin Plated Copper UL 94 VO Thermoplastic 90V UL 94 VO Thermoplastic 90V 34mA (460Vac) 34mA (460Vac) Wire Range Housing Material Catalog Symbol: CH30J_(I) CH60J_ (I) Ampere Rating: 1 to 60A Voltage Rating: 600Vac (or less) Interrupting Rating: 200,000A RMS Sym. Agency Approvals: Listed UL 512, Guide IZLT, File E14853 CSA Certified per C22.2 Nos. 39 Class 6225-01, File LR47235 Other Electrical Certifications: CE compliance for the European Union Low Voltage Directive Recommended Cooper Bussmann Fuses: Class J Time Delay LPJ (Data Sheet 1006) Class J Fast Acting JKS (Data Sheet 1026) 0 to 30A Class J Minimum Indicating Voltage (Neon Lamp) Nominal Operating Current (Neon Lamp) Max Operating Temperature Storage Temperature 85°C 85°C -20°C to +65°C -20°C to +65°C CE logo denotes compliance with European Union Low Voltage Directive (50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Cooper Bussmann Application Engineering at 314-527-1270 for more information. 7-5-05 SB05189 Form No. Class J 1-60 Page 1 of 2 Data Sheet: 2144 Cooper Bussmann CH Series Modular Fuse Holders Class J Class J – 600 Volt 1-60A E H D G Dimensional Data F 3 POLE CLASS J Modular Fuse Holder Dimension CH30J in [mm] CH60J in [mm] A 1.28 [32.5] 1.58 [40.0] B 2.56 [65.0] 3.16 [80.0] C 3.84 [97.5] 4.72 [120.0] D 4.59 [116.6] 4.88 [124.0] E 2.83 [71.8] 3.31 [84.1] F 3.56 [90.4] 3.85 [97.9] G 1.28 [32.5] 1.58 [40.0] H 0.18 [4.44] 0.18 [4.44] A B C Catalog Numbers Easy ID Window 30A Class J 30A AND 60A Ganging Assembly 60A Class J Neon Indicating 1Pole CH30J1 CH30J1I 2Pole CH30J2 CH30J2I 3Pole CH30J3 CH30J3I 1Pole CH60J1 CH60J1I 2Pole CH60J2 CH60J2I 3Pole CH60J3 CH60J3I Accessories Part Number Description Carton Qty. 2A1073 Ganging Kit (3 Pole) 2 Spring Pins 6 Plastic Connectors 2A1164 Neon Indication 3 2A1777 Circuit Markers 100 INDICATOR ASSEMBLING The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 7-5-05 SB05189 Form No. Class J 1-60 Page 2 of 2 Data Sheet: 2144