er w Po ST TE SERIES SDS130 FERRITE 2.2 ±30% 3.0 ±30% 3.9 ±30% 4.7 ±30% 6.8 ±30% 10 ±20% 12 ±20% 15 ±20% 18 ±20% 22 ±20% 27 ±20% 33 ±20% 39 ±20% 47 ±20% 56 ±20% 68 ±20% 82 ±20% 100 ±20% 120 ±20% 150 ±20% 180 ±20% 220 ±20% 270 ±20% 330 ±20% 390 ±20% 470 ±20% CORE & SLEEVE 100 0.045 100 0.062 100 0.070 100 0.078 100 0.100 1 0.145 1 0.185 1 0.20 1 0.27 1 0.30 1 0.40 1 0.45 1 0.56 1 0.65 1 0.68 1 0.80 1 1.20 1 1.40 1 1.52 1 1.80 1 2.20 1 2.70 1 3.10 1 3.60 1 4.60 1 5.10 s or ct du In NG TI ) RA A T (m EN UM RR IM CU X MA CE AN ) ST S SI HM RE M (O DC U M XI ) MA Hz (M Y NC UE EQ FR -222N -302N -392N -472N -682N -103M -123M -153M -183M -223M -273M -333M -393M -473M -563M -683M -823M -104M -124M -154M -184M -224M -274M -334M -394M -474M E NC RA LE TO Millimeters 12.7 ±0.2 10.1±0.2 3.0 Max. 2.4 ±0.2 2.2 ±0.2 7.7 ±0.4 7.3 Ref. 3.0 Ref. 2.8 Ref. H) (µ Physical Parameters Inches A 0.500 ±0.008 B 0.398 ±0.008 C 0.118 Max. D 0.094 ±0.008 E 0.087 ±0.008 F 0.303 ±0.015 G 0.287 Ref. H 0.118 Ref. I 0.110 Ref. R* Actual Size E MB NU Surface Mount Shielded Power Choke CE AN CT DU IN SDS130R SH DA SERIES 3500 3000 2800 2500 2200 2000 1750 1500 1400 1300 1200 1100 950 800 750 700 650 600 550 500 450 400 350 300 250 200 *Complete part # must include series # PLUS the dash # For surface finish information, refer to www.delevanfinishes.com Current rating at 25°C Ambient 40°C Max. Rise Operating Temperature Range -40°C to +85°C Weight Maximum 0.85 grams Marking For values lower than 10 μH the R indicates a decimal point and the remaining digits indicate the inductance in μH. For values 10 μH and above, the first two digits indicate the inductance in μH and the third digit indicates the number of trailing zeros where a zero indicates that there are no trailing zeros. Example: SDS130R-222N (2.2 μH) 2R2 Example: SDS130R-473M (47 μH) 470 Packaging Tape & Reel (24mm): 13" reel 1000 pieces max. 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com 1/2009