API_newlayouts_single:APIcatalog_newlayouts 8/27/10 10:06 AM Page 123 r pp Su es FFAM SERIES rs so Flexible Ferrite Absorbent Material Wide Variety of Uses Case 1 To suppress noise generated between circuit boards, apply between boards. Case 2 To suppress noise generated by casing, apply directly to casing. Case 3 To suppress unwanted radiation of noises from LSI, IC and cables. For LSI & IC, apply directly to top surface (Caution - thermal conductivity). For flat cables, apply directly. For round cables, wrap around and apply heatshrink material. Features • Provides effective EMI suppression in a wide frequency range (10 MHz to 3 GHz) • Effective in preventing resonance and suppressing coupling • Ultra thin (0.25mm through 2.5mm) • High electrical resistance (106 to 108 Ohms) • Non-conductive adhesive backing (UL Recognized) available on one or both sides • Easy and fast to process • Extremely flexible Applications • Notebook and personal computers, workstations • Peripheral devices for computers • Anechoic chambers (irregular surface) • LNB's for satellite systems • Wireless equipment • Mobile communications equipment • Mobile phones • Base stations • Consumer electronics • Gasketing • High speed clocks IMPEDANCE vs. FREQUENCY TABLE FREQ. FFAM025 FFAM06 FFAM10 FFAM15 FFAM20 FFAM25 0.57 0.59 0.59 0.60 0.52 0.57 1 6 6 6 0.60 5.3 5.3 10 12 12 12 12 12 12 20 17 17 17 18 17 17 30 23 23 23 24 23 23 40 29 29 29 30 26 28 50 35 35 35 36 35 35 60 41 41 42 43 41 41 70 47 48 48 49 47 47 80 54 54 55 56 54 54 90 60 61 62 63 55 58 100 150 154 155 159 135 144 200 370 395 396 412 303 349 300 } } } } Ordering Note (Part Numbering Callout) FFAM 06 3*3 T1 Optional Adhesive Backing (1 = single-sided -or- 2 = double-sided) Sheet Size (in mm - 3*3 = 300mm x 300mm square Material Thickness (in mm - decimal point to the right of 1st character is assumed) Series Designation - Flexible ferrite absorbent material Impedance Measurement using HP4191A Physical Parameters Available Sizes Inches 3.93 x 3.93 7.87 x 7.87 11.81 x 11.81 15.75 x 15.75 Millimeters 100 x 100 200 x 200 300 x 300 400 x 400 Thicknesses available (with MH13008 UL Recognized tape) Inches Millimeters FFAM025 0.009 0.25 FFAM06 0.024 0.6 FFAM10 0.039 1.0 FFAM15 0.059 1.5 FFAM20 0.079 2.0 FFAM25 0.098 2.5 Operating Temperature Range –55°C to +125°C 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com 1/2009