AZ762H AZ 16 A SPDT MINIATURE HIGH TEMPERATURE POWER RELAY FEATURES • • • • • • • • High ambient operating temperature (105°C) Dielectric strength 5000 Vrms Low cost Epoxy sealed versions available 16 Amp switching (standard coil only) Class F system standard Isolation spacing greater than 10 mm UL, CUR file E44211, VDE40006031 CONTACTS GENERAL DATA Arrangement SPDT (1 Form C) SPST (1 Form A) Ratings Resistive load: Max. switched power: 4000 VA (Sensitve Version: 2500 VA) Max. switched current: 16 A (Sensitive version: 10A) Max. switched voltage: 125* VDC or 440 VAC *Note: If switching voltage is greater than 30 VDC, special precau- Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 16 A 277 VAC general use OperateTime (typical) 7 ms at nominal coil voltage ReleaseTime (typical) 3 ms at nominal coil voltage (with no coil suppression) Dielectric Strength (at sea level for1min.) 5000 Vrms coil to contact 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C 500 VDC 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 105°C (221°F) -40°C (-40°F) to 155°C (266°F) Vibration 0.062" DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P. C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 14 grams tions must be taken. Please contact the factory. Rated Load UL, CUR VDE (Standard Coil) 18.4 A at 250 VAC resistive, 20k cycles (NO only) 105°C 16 A at 277 VAC general use, 100k cycles 105°C 5 A at 30 VDC resistive 100k cycles 105°C (Sensitive Coil) 10 A at 277 VAC general use, 100k cycles 105°C 16 A at 250 VAC resistive, 105°C Standard coils Class F Only 10 A at 250 VAC resistive, 105°C Sensitive coils Class F Only Material Silver nickel. Gold plating available Resistance < 50 milliohms initially (using 6 V 1 A method) COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise 196 mW Standard 140 mW Sensitive 1.7 W at 20°C (68°F) ambient 26°C (47°F) at nominal coil voltage (standard coil) 17°C (31°F) at nominal coil voltage (sensitive coil) Max. Temperature 155°C (311°F) Class F NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 10/3/13 AZ AZ762H RELAY ORDERING DATA COIL SPECIFICATIONS - STANDARD RELAYS Nominal Coil VDC 5 ORDER NUMBER* Must Operate VDC 3.5 Max. Continuous VDC 6.5 Coil Resistance ±10% 62 Unsealed Sealed AZ762H–1CB–5DF AZ762H–1CB–5DEF 6 4.2 7.8 90 AZ762H–1CB–6DF AZ762H–1CB–6DEF 9 6.3 11.7 12 8.4 15.6 202 18 12.6 23.4 810 AZ762H–1CB–18DF AZ762H–1CB–18DEF 24 16.8 31.2 1440 AZ762H–1CB–24DF AZ762H–1CB–24DEF 48 33.6 62.4 5760 AZ762H–1CB–48DF AZ762H–1CB–48DEF 60 42.0 78.0 AZ762H–1CB–60DF AZ762H–1CB–60DEF 360 7500 COIL SPECIFICATIONS - SENSITIVE RELAYS AZ762H–1CB–9DF AZ762H–1CB–9DEF AZ762H–1CB–12DF AZ762H–1CB–12DEF ORDER NUMBER* Nominal Coil VDC Must Operate VDC Max. Continuous VDC Coil Resistance ± 10% 5 3.75 6.5 100 AZ762H–1CB–5DSF AZ762H–1CB–5DSEF 6 4.50 7.8 144 AZ762H–1CB–6DSF AZ762H–1CB–6DSEF 324 Unsealed Sealed 9 6.75 11.7 AZ762H–1CB–9DSF AZ762H–1CB–9DSEF 12 9.00 15.6 576 AZ762H–1CB–12DSF AZ762H–1CB–12DSEF 18 13.50 23.4 1296 AZ762H–1CB–18DSF AZ762H–1CB–18DSEF 24 18.00 31.2 2304 AZ762H–1CB–24DSF AZ762H–1CB–24DSEF 48 36.00 62.4 9216 AZ762H–1CB–48DSF AZ762H–1CB–48DSEF 60 45.00 78.0 12857 AZ762H–1CB–60DSF AZ762H–1CB–60DSEF * For 1 form A contacts substitute “-1AB” for “-1CB.” For gold plated contacts add suffix “A.” 10/3/13 AZ762H HARDWARE ORDERING DATA DESCRIPTION ORDER NUMBER DESCRIPTION ORDER NUMBER Socket ST484–U1 Retainer ST482–3 MECHANICAL DATA .512 Max. [12.7 ± 0.3] 1.154 Max. [29 ± 0.3] PC B O A R D LA YO U T V IE W E D T O W A R D S T E R M IN A L S .1 9 7 [5 .0 ] .597 [15.16] .1 9 7 [5 .0 ] .619 Max. [15.7] .0 9 8 [2 .5 ] .2 9 5 [7 .5 ] .2 9 5 [7 .5 ] .1 5 4 [3 .9 ] 6 X .0 2 0 [0 .5 ] .0 9 8 [2 .5 ] 2 Xø.0 3 2 [ø0 .8 ] 6 Xø.0 5 0 [ø1 .3 ] 2 Xø.0 2 4 [ø0 .6 ] .2 9 5 [7 .5 ] 6 X .0 3 5 [0 .9 ] .1 9 7 [5 .0 ] .0 9 8 [2 .5 ] .597 [15.16] .1 9 7 [5 .0 ] HARDWARE ST484-U1 .5 0 0 (1 2 .7 ) 1 .2 8 (3 2 .5 ) 1 .2 2 (3 0 .9 ) WIRING DIAGRAMS .4 1 4 (1 0 .5 ) VIEWED TOWARDS TERMINALS 5 * 8* 4 7 3 * 6* 2 .1 2 5 D IA (0 .5 ) .3 6 6 (9 .3 ) R E AT IN IN G C L IP .2 9 5 (7 .5 ) 1 .5 9 0 (1 5 ) * Terminals 3 & 6 not used on form A .3 5 4 (9 .0 ) .1 7 7 (4 .5 ) M AX .1 1 8 (3 .0 ) .1 9 7 (5 .0 ) .1 9 7 (5 .0 ) 1 .3 8 5 [3 5 .1 9 ] .8 9 5 [2 2 .7 3 ] .6 6 1 [1 6 .7 9 ] .0 5 9 D IA (1 .5 ) ST482-3 Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 10/3/13