AZ2200

AZ2200
30 AMP MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
Quick-connect leads for contacts
1 Form A, B and C contacts available
AC and DC coils available
Epoxy sealed versions available
UL Class F (155°C) standard
UL, CUR file E44211
VDE 40027037 ( DC coil only )
GENERAL DATA
CONTACTS
Arrangement
Ratings
UL, CUR
SPST (1 Form A, or B)
SPDT (1 Form C)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 120 VAC Res. N.O.
Resistive load:
Operate Time
15 msec max. at nominal coil voltage
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A (Form A)
15 A (Form B)
Max. switched voltage: 277 VAC, 28 VDC
Release Time
10 msec max. at nominal coil voltage
(without suppression)
Dielectric Strength
1500 Vrms contact to contact
2500 Vrms contact to coil
1 Form A
30 A at 277 VAC, General Use [1][2]
28 A at 277 VAC, General Use, 100k cycles [1]
2 Hp at 250 VAC [1][2]
1 HP at 125 VAC [1][2]
30 A at 28 VDC [1]
20/60 (FLA/LRA) at 277 VAC 30k cycles [1]
1 Form B
15 A at 277 VAC, General Use [1]
10 A at 28 VDC [1]
0.5 HP at 250 VAC [1]
0.25 HP at 125 VAC [1]
10/33 (FLA/LRA) at 277 VAC 30k cycles [1]
1 Form C
30/20 A (N.O./N.C.) at 277 VAC, General Use [1][2]
20/10 A (N.O./N.C.) at 28 VDC[1]
2/0.5 HP (N.O./N.C.) at 250 VAC[1][2]
1/0.25 HP (N.O./N.C.) at 125 VAC[1][2]
20/60 (FLA/LRA) at 277 VAC 30k cycles N.O. [1]
10/33 (FLA/LRA) at 277 VAC 30k cycles N.C. [1]
VDE
Contact factory for ratings.
Material
Silver cadmium oxide [1], silver tin oxide [2]
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
COIL
(at sea level for 1 min.)
Insulation Resistance
1000 megohms min. at 20°C, 500 VDC
50% RH
Dropout
DC: > 10% of nominal coil voltage
AC: > 20% of nominal coil voltage
Ambient Temperature
Operating
Storage
-55°C (-67°F) to 85°C (185°F)
-55°C (-67°F) to 155°C (311°F)
Vibration
0.062" DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C., Quick Connects
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
36 grams
Power
At Pickup Voltage
(typical)
DC: 500 mW
AC: 1.4 VA
Max. Continuous
Dissipation
DC: 1.7 W at 20°C
AC: 2.7 VA at 20°C
1. All values at 20°C (68°F).
155°C (311°F)
3. Specifications subject to change without notice.
Max. Temperature
NOTES
2. Relay may pull in with less than “Must Operate” value.
9/3/10
AZ2200
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC Coil
Nominal Coil
VDC
5
Must Operate
VDC
3.75
Max. Continuous
VDC
6.4
Nominal Current
mA ± 10%
185
Coil Resistance
± 10%
27
ORDER NUMBER*
AZ2200–1A–5DF
6
4.50
7.8
150
40
AZ2200–1A–6DF
9
6.75
12.2
93
97
AZ2200–1A–9DF
9.01
12
15.4
77
155
AZ2200–1A–12DF
15
11.3
19.8
59
256
AZ2200–1A–15DF
18
13.5
24.1
47
380
AZ2200–1A–18DF
24
18.0
32.0
36
660
AZ2200–1A–24DF
48
36.0
62.6
19
2,560
AZ2200–1A–48DF
COIL SPECIFICATIONS – AC Coil 50/60 Hz
Nominal Coil
VAC
12
Must Operate
VAC
10.2
Max. Continuous
VAC
13.8
Nominal Coil
Power VA
2.3
Coil Resistance
± 10%
25
ORDER NUMBER*
AZ2200–1A–12AF
24
20.4
27.6
2.1
100
120
102.0
138.0
2.3
2,500
AZ2200–1A–24AF
AZ2200–1A–120AF
208
176.8
239.0
2.2
11,000
AZ2200–1A–208AF
220/240
187.0
276.0
2.2/2.6
13,490
AZ2200–1A–240AF
277
235.4
318.5
2.2
15,000
AZ2200–1A–277AF
*Substitute “-1B” or “-1C” in place of “-1A” for 1 Form B or 1 Form C respectively. For silver tin oxide contacts substitute “-1AE” or “-1CE” in place of “-1A” or “-1C.”
Add “T” to “-1A”, “-1AE”, “-1B”, “-1C” or “-1CE” for extended life contacts. Substitute “DEF” or “AEF” in place of “DF” or “AF” for epoxy sealed version.
MECHANICAL DATA
PC Board Layout
Wiring Diagram
3
2
4
4
3
2
4
Bottom View
1
Form A
5
1
5
Form B
1
5
Form C
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
9/3/10