click here to see hardware and mounting options Type 520C 85 °C Long Life, Inverter Grade, Aluminum High Ripple, Long Life Screw Terminal Type Type 520C is the 85 °C version of the Type 550C Inverter-Grade capacitor. It delivers the ripple-current capability and exceptional life needed for motor-drive bus capacitors and approaches the performance of the 550C at lower cost. It is rated for 8000 h life with full ripple current, rated voltage, 85 °C and 100 lfm airflow while mounted horizontally. Horizontal mounting is more severe than vertical mounting. The extended cathode foil of the 520C assures heat flow from the capacitor element to the can in all orientations. Highlights Specifications - 8,000 hour load life - Ripple current to 55 amps - ESRs to 8 mΩ - Best value high ripple current - Thermal-Pak™ extended cathode construction Temperature Range –40 °C to +85 °C Rated Voltage Range 200 Vdc to 500 Vdc Capacitance Range 84 µF to 39,000 µF Capacitance Tolerance –10% +50% Leakage Current ≤3 √CV µA, 5 mA max, 5 minutes Ripple Current Multipliers Ambient Temperature 45 ºC 55 ºC 1.80 1.63 65 ºC 75 ºC 85 ºC 1.45 1.25 1.00 Frequency 50 60 120 360 Hz Hz Hz Hz 1 3/8” & 1 3/4” Diameters 200 to 350 V 0.76 0.81 1.00 1.24 400 to 500 V 0.76 0.81 1.00 1.24 2” & 2 1/2” Diameters 200 to 350 V 0.78 0.83 1.00 1.20 400 to 500 V 0.77 0.82 1.00 1.22 3” & 3 1/2” Diameters 200 to 350 V 0.84 0.88 1.00 1.12 400 to 500 V 0.79 0.84 1.00 1.18 1 5 10 kHz kHz kHz & up 1.36 1.43 1.44 1.37 1.44 1.45 1.29 1.34 1.35 1.33 1.39 1.40 1.17 1.20 1.20 1.26 1.31 1.32 Low Temperature Characteristics Impedance ratio: Z–20⁰C ∕ Z+25⁰C ≤ 3 (200–500 Vdc) Endurance Life Test 8000 h at full load at 85 °C ∆ Capacitance ±20% ESR 200% of limit DCL 100% of limit Shelf Life Test 500 h at 85 °C Capacitance 100% of limit ESR 100% of limit DCL 100% of limit Vibration 10 to 55 Hz, 0.06” and 10 g max, 1.5 h each of 2 axes RoHS Compliant CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 Type 520C 85 °C Long Life, Inverter Grade, Aluminum High Ripple, Long Life Screw Terminal Type Part Numbering System 520C 572 T 400 DF 2 B Type Capacitance Tolerance Voltage Case Code Insulation 0= None 200 = 200 Vdc 572 =5700 µF M = ±20% 1= Polyester 400 = 400 Vdc U = –10%+75% 2= PVC T = –10%+50% Terminal A = Low Post B = High Post D = High Current, Low Post E = High Current, High Post F or M = M5 Post G = M6 Low Post H = M6 High Post Standard insulation is 0.008-in PVC sleeve with 0.01-in polypropylene end disk. Polyester insulation is not available for 3.5 inch diameter units. Outline Drawing D S Can Style Blank= Standard Can S= Stud Bottom P= Stud with Thermal Pad + Stud Dimensions S H +0 -.062 (+0 -1.57) L Case Stud P± 0.039” Diam. Thread (±1.0 mm) 1.375 M8 0.470” (12.0) 1.750 M8 0.470” (12.0) 2.000 M12 0.630” (16.0) 2.500 M12 0.630” (16.0) 3.000 M12 0.630” (16.0) 3.500 M12 0.630” (16.0) P Optional Stud NOTE: With the stud-mount feature, a thermally-conductive disk can be inserted in the bottom flush with the outer insulating sleeve.This reduces the thermal resistance through the can bottom by 0.3 °C/W. Can Style P. Terminal Dimensions For Case Post Diameter H max min Full Thread Torque Terminal Style Diameters Code in mm in mm Thread in mm in∙lb N∙m Low Post 1⅜ to 3 A 0.314 8.0 0.094 2.4 10–32 0.218 5.5 25 2.82 High Post 1⅜ to 3 B 0.314 8.0 0.281 7.1 10–32 0.375 9.5 25 2.82 High Current, Low 2½ to 3½ D 0.684 17.4 0.125 3.2 ¼–28 0.344 8.7 50 5.65 High Current, High 2½ to 3½ E 0.684 17.4 0.281 7.1 ¼–28 0.469 11.9 60 6.78 M5 Post, Small 1⅜ to 2 M 0.314 8.0 0.281 7.1 M5 0.375 9.5 25 2.82 M5 Post 2½ & 3 F 0.512 13.0 0.230 5.8 M5 0.344 8.7 25 2.82 M6 Low Post 2½ to 3½ G 0.684 17.4 0.125 3.2 M6 0.344 8.7 50 5.65 M6 High Post 2½ to 3½ H 0.684 17.4 0.281 7.1 M6 0.469 11.9 60 6.78 CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 Type 520C 85 °C Long Life, Inverter Grade, Aluminum High Ripple, Long Life Screw Terminal Type Uninsulated Case Dimensions For insulated case, add 0.024”(0.610 mm) to “D”and 0.030”(0.762 mm) to length. Diam. (D) Length (L) Terminals (S) Case Code ±.031 Inches ±.78 mm ±.062 Inches ±1.57 mm ±0.015 Inches ±.38 mm Typical Weight oz g AK 1.375 34.93 1.625 41.28 0.50 12.70 1.9 54 AA 1.375 34.93 2.125 53.98 0.50 12.70 2.0 57 AH 1.375 34.93 2.625 66.68 0.50 12.70 2.7 77 AB 1.375 34.93 3.125 79.38 0.50 12.70 3.3 94 AJ 1.375 34.93 3.625 92.08 0.50 12.70 3.8 108 AC 1.375 34.93 4.125 104.78 0.50 12.70 4.4 125 AD 1.375 34.93 4.625 117.48 0.50 12.70 5.1 145 AE 1.375 34.93 5.125 130.18 0.50 12.70 6.8 193 230 AF 1.375 34.93 5.625 142.88 0.50 12.70 8.1 EA 1.750 44.45 2.125 53.98 0.75 19.05 2.7 76 EH 1.750 44.45 2.625 66.68 0.75 19.05 3.8 108 EB 1.750 44.45 3.125 79.38 0.75 19.05 5.1 145 EJ 1.750 44.45 3.625 92.08 0.75 19.05 6.8 193 EC 1.750 44.45 4.125 104.78 0.75 19.05 8.1 230 ED 1.750 44.45 4.625 117.48 0.75 19.05 9.0 255 EE 1.750 44.45 5.125 130.18 0.75 19.05 9.5 269 EF 1.750 44.45 5.625 142.88 0.75 19.05 10.5 298 BA 2.000 50.80 2.125 53.98 0.88 22.23 5.4 153 BH 2.000 50.80 2.625 66.68 0.88 22.23 6.1 173 BB 2.000 50.80 3.125 79.38 0.88 22.23 6.8 193 BJ 2.000 50.80 3.625 92.08 0.88 22.23 8.2 232 BC 2.000 50.80 4.125 104.78 0.88 22.23 9.5 269 BD 2.000 50.80 4.625 117.48 0.88 22.23 10.3 292 BE 2.000 50.80 5.125 130.18 0.88 22.23 10.7 303 BF 2.000 50.80 5.625 142.88 0.88 22.23 13.0 369 CH 2.500 63.50 2.625 66.68 1.13 28.58 9.2 261 CB 2.500 63.50 3.125 79.38 1.13 28.58 10.4 295 CJ 2.500 63.50 3.625 92.08 1.13 28.58 12.7 361 CC 2.500 63.50 4.125 104.78 1.13 28.58 15.0 425 CD 2.500 63.50 4.625 117.48 1.13 28.58 17.2 488 CE 2.500 63.50 5.125 130.18 1.13 28.58 19.3 547 CF 2.500 63.50 5.625 142.88 1.13 28.58 21.4 607 DB 3.000 76.20 3.125 79.38 1.25 31.75 16.7 473 DJ 3.000 76.20 3.625 92.08 1.25 31.75 20.0 567 DC 3.000 76.20 4.125 104.78 1.25 31.75 22.2 629 DD 3.000 76.20 4.625 117.48 1.25 31.75 25.5 723 DE 3.000 76.20 5.125 130.18 1.25 31.75 30.0 850 DF 3.000 76.20 5.625 142.88 1.25 31.75 31.9 904 DM 3.000 76.20 6.625 168.28 1.25 31.75 34.4 933.5 DP 3.000 76.20 5.875 149.23 1.25 31.75 32.8 931 DN 3.000 76.20 7.625 193.68 1.25 31.75 39.5 1119 DG 3.000 76.20 8.625 219.08 1.25 31.75 43.3 1227 FC 3.500 88.90 4.125 104.78 1.25 31.75 30.0 850 FD 3.500 88.90 4.625 117.48 1.25 31.75 34.4 976 FE 3.500 88.90 5.125 130.18 1.25 31.75 40.5 1148 FF 3.500 88.90 5.625 142.88 1.25 31.75 43.1 1221 FP 3.500 88.90 5.875 149.23 1.25 31.75 44.3 1257 FN 3.500 88.90 7.625 193.68 1.25 31.75 53.3 1512 FG 3.500 88.90 8.625 219.08 1.25 31.75 58.5 1658 FM 3.500 88.90 6.625 168.28 1.25 31.75 46.4 1315.4 CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 Type 520C 85 °C Long Life, Inverter Grade, Aluminum High Ripple, Long Life Screw Terminal Type Ratings Cap. (µF) ESR Max. Ripple Max. @ @ 25 °C 120 Hz 85 °C 120 Hz Nominal Size (mΩ) (A) D x L (inches) Catalog Part Number Additional Smaller Sizes available at www.cde.com/catalogs/520C.pdf Cap. (µF) 200 Vdc (250 Vdc Surge) ESR Max. Ripple Max. @ @ 25 °C 120 Hz 85 °C 120 Hz Nominal Size (mΩ) (A) D x L (inches) Catalog Part Number 250 Vdc (300 Vdc Surge) 3200 520C322T200CH2B 44.3 9.0 2 1/2 x 2 5/8 16000 520C163T250FP2D 13.5 26.0 3 1/2 x 5 7/8 4400 520C442T200CB2B 32.8 11.1 2 1/2 x 3 1/8 18000 520C183T250DG2D 7.4 36.2 3 x 8 5/8 5700 520C572T200CJ2B 23.4 13.8 2 1/2 x 3 5/8 22000 520C223T250FN2D 11.0 31.5 3 1/2 x 7 5/8 6400 520C642T200DB2B 31.8 12.6 3 x 3 1/8 26000 520C263T250FG2D 9.6 34.6 3 1/2 x 8 5/8 7000 520C702T200CC2B 21.3 15.1 2 1/2 x 4 1/8 8200 520C822T200CD2B 18.2 17.0 2 1/2 x 4 5/8 1600 520C162T300CH2B 59.5 7.8 2 1/2 x 2 5/8 8200 520C822T200DJ2B 24.9 15.0 3 x 3 5/8 2200 520C222T300CB2B 48.8 9.1 2 1/2 x 3 1/8 9500 520C952T200CD2B 16.6 18.4 2 1/2 x 5 1/8 2900 520C292T300CJ2B 40.0 10.6 2 1/2 x 3 5/8 10000 520C103T200DC2B 20.7 17.1 3 x 4 1/8 3400 520C342T300DB2B 44.9 10.6 3 x 3 1/8 11000 520C113T200CF2B 14.4 20.4 2 1/2 x 5 5/8 3500 520C352T300CC2B 31.4 12.5 2 1/2 x 4 1/8 12000 520C123T200DD2B 17.7 19.2 3 x 4 5/8 4100 520C412T300CD2B 26.8 14.0 2 1/2 x 4 5/8 14000 520C143T200DE2B 18.0 19.7 3 x 5 1/8 4300 520C432T300DJ2B 35.7 12.5 3 x 3 5/8 15000 520C153T200FC2D 15.6 21.7 3 1/2 x 4 1/8 4800 520C482T300CD2B 23.3 15.5 2 1/2 x 5 1/8 16000 520C163T200DF2B 14.0 23.0 3 x 5 5/8 5300 520C532T300DC2B 27.5 14.9 3 x 4 1/8 16000 520C163T200DP2B 16.1 21.7 3 x 5 7/8 5400 520C542T300CF2B 20.7 17.0 2 1/2 x 5 5/8 17000 520C173T200FD2D 13.3 24.4 3 1/2 x 4 5/8 6300 520C632T300DD2B 24.8 16.3 3 x 4 5/8 20000 520C203T200FE2D 14.1 24.4 3 1/2 x 5 1/8 7200 520C722T300DE2B 21.5 18.0 3 x 5 1/8 22000 520C223T200DN2D 12.3 27.6 3 x 7 5/8 7400 520C742T300FC2D 22.1 18.2 3 1/2 x 4 1/8 23000 520C233T200FF2D 12.6 26.5 3 1/2 x 5 5/8 8200 520C822T300DF2B 18.9 19.8 3 x 5 5/8 24000 520C243T200FP2D 12.0 27.5 3 1/2 x 5 7/8 8700 520C872T300DP2B 17.9 20.6 3 x 5 7/8 26000 520C263T200DG2D 10.1 31.0 3 x 8 5/8 8800 520C882T300FD2D 19.1 20.3 3 1/2 x 4 5/8 34000 520C343T200FN2D 9.7 33.6 3 1/2 x 7 5/8 10000 520C103T300FE2D 16.8 22.3 3 1/2 x 5 1/8 39000 520C393T200FG2D 8.3 37.2 3.5 x 8 5/8 11000 520C113T300FF2D 15.0 24.4 3 1/2 x 5 5/8 12000 520C123T300DN2B 13.8 26.1 3 x 7 5/8 2100 520C212T250CH2B 54.2 8.2 2 1/2 x 2 5/8 12000 520C123T300FP2D 14.2 25.3 3 1/2 x 5 7/8 3000 520C302T250CB2B 33.6 11.0 2 1/2 x 3 1/8 14000 520C143T300DG2B 11.3 29.3 3 x 8 5/8 3900 520C392T250CJ2B 26.3 13.0 2 1/2 x 3 5/8 17000 520C173T300FN2D 11.5 30.9 3 1/2 x 7 5/8 4300 520C432T250DB2B 29.0 13.2 3 x 3 1/8 20000 520C203T300FG2D 9.8 34.2 3 1/2 x 8 5/8 4700 520C472T250CC2B 21.8 15.0 2 1/2 x 4 1/8 5600 520C562T250CD2B 18.6 16.8 2 1/2 x 4 5/8 1500 520C152T350CH2B 91.3 6.3 2 1/2 x 2 5/8 5600 520C562T250DJ2B 22.7 15.7 3 x 3 5/8 2000 520C202T350CB2B 64.0 8.0 2 1/2 x 3 1/8 6400 520C642T250CD2B 16.3 18.6 2 1/2 x 5 1/8 2600 520C262T350CJ2B 51.0 9.4 2 1/2 x 3 5/8 6800 520C682T250DC2B 18.5 18.2 3 x 4 1/8 3100 520C312T350DB2B 56.6 9.5 3 x 3 1/8 7300 520C732T250CF2B 14.5 20.3 2 1/2 x 5 5/8 3200 520C322T350CC2B 41.9 10.8 2 1/2 x 4 1/8 8000 520C802T250DD2B 17.1 19.5 3 x 4 5/8 3800 520C382T350CD2B 35.7 12.1 2 1/2 x 4 5/8 250 Vdc (300 Vdc Surge) 300 Vdc (350 Vdc Surge) 350 Vdc (400 Vdc Surge) 9300 520C932T250DE2B 15.0 21.6 3 x 5 1/8 4000 520C402T350DJ2B 43.8 11.3 3 x 3 5/8 10000 520C103T250FC2D 20.4 19.0 3 1/2 x 4 1/8 4400 520C442T350CD2B 31.1 13.5 2 1/2 x 5 1/8 11000 520C113T250DF2B 12.6 24.3 3 x 5 5/8 4800 520C482T350DC2B 36.5 12.9 3 x 4 1/8 11000 520C113T250DP2B 12.1 25.1 3 x 5 7/8 4900 520C492T350CF2B 27.6 14.7 2 1/2 x 5 5/8 12000 520C123T250FD2D 18.1 20.9 3 1/2 x 4 5/8 5700 520C572T350DD2B 31.0 14.5 3 x 4 5/8 14000 520C143T250FE2D 15.8 23.0 3 1/2 x 5 1/8 6600 520C662T350DE2B 27.1 16.1 3 x 5 1/8 15000 520C153T250FF2D 13.9 25.3 3 1/2 x 5 5/8 6800 520C682T350FC2D 31.4 15.3 3 1/2 x 4 1/8 16000 520C163T250DN2B 9.1 32.2 3 x 7 5/8 7500 520C752T350DF2B 24.1 17.5 3 x 5 5/8 CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 Type 520C 85 °C Long Life, Inverter Grade, Aluminum High Ripple, Long Life Screw Terminal Type Additional Smaller Sizes available at www.cde.com/catalogs/520C.pdf ESR Max. Ripple Max. @ 25 °C 120 Hz @ 85 °C 120 Nominal Size (mΩ) Hz (A) D x L (inches) ESR Max. Ripple Max. @ @ 25 °C 120 Hz 85 °C 120 Hz Nominal Size (mΩ) (A) D x L (inches) Cap. (µF) Catalog Part Number 3 x 5 7/8 2500 520C252T450DJ2B 40.3 11.8 3 x 3 5/8 17.1 3 1/2 x 4 5/8 2700 520C272T450CE2B 38.9 12.0 2 1/2 x 5 1/8 18.9 3 1/2 x 5 1/8 3100 520C312T450CF2B 32.7 13.5 2 1/2 x 5 5/8 20.6 3 1/2 x 5 5/8 3100 520C312T450DC2B 33.0 13.6 3 x 4 1/8 Cap. (µF) Catalog Part Number 7900 520C792T350DP2B 22.8 18.3 8000 520C802T350FD2D 27.0 9200 520C922T350FE2D 23.6 10000 520C103T350FF2D 21.0 350 Vdc (400 Vdc Surge) 450 Vdc (500 Vdc Surge) 10000 520C103T350FF2D 21.0 20.6 3 1/2 x 5 5/8 3600 520C362T450DD2B 27.8 15.3 3 x 4 5/8 11000 520C113T350FP2D 19.9 21.4 3 1/2 x 5 7/8 4200 520C422T450DE2B 23.9 17.1 3 x 5 1/8 13000 520C133T350DG2B 14.9 25.5 3 x 8 5/8 4300 520C432T450FC2D 23.9 17.5 3 1/2 x 4 1/8 15000 520C153T350FN2D 15.7 26.7 3 1/2 x 7 5/8 4700 520C472T450DF2B 21.3 18.7 3 x 5 5/8 18000 520C183T350FG2D 13.0 29.7 3 1/2 x 8 5/8 5000 520C502T450DP2B 20.0 19.5 3 x 5 7/8 5000 520C502T450FD2D 20.0 19.9 3 1/2 x 4 5/8 1100 520C112T400CH2B 97.8 6.1 2 1/2 x 2 5/8 5800 520C582T450FE2D 17.6 21.8 3 1/2 x 5 1/8 1600 520C162T400CB2B 68.6 7.7 2 1/2 x 3 1/8 6600 520C662T450FF2D 15.1 24.2 3 1/2 x 5 5/8 2000 520C202T400CJ2B 54.6 9.1 2 1/2 x 3 5/8 7000 520C702T450FP2D 14.3 25.2 3 1/2 x 5 7/8 2400 520C242T400CC2B 44.9 10.4 2 1/2 x 4 1/8 7000 520C702T450DN2B 15.0 25.0 3 x 7 5/8 2400 520C242T400DB2B 60.4 9.2 3 x 3 1/8 8100 520C812T450DG2B 12.5 27.9 3 x 8 5/8 2900 520C292T400CD2B 47.1 10.6 2 1/2 x 4 5/8 9500 520C952T450FN2D 11.0 32.0 3 1/2 x 7 5/8 3000 520C302T400DJ2B 47.1 10.9 3 x 3 5/8 11000 520C113T450FG2D 9.1 35.5 3 1/2 x 8 5/8 3300 520C332T400CD2B 33.0 13.0 2 1/2 x 5 1/8 3700 520C372T400DC2B 38.8 12.5 3 x 4 1/8 4.7 2 1/2 x 2 5/8 400 Vdc (450 Vdc Surge) 500 Vdc (550 Vdc Surge) 630 520C631T500CH2B 165.0 3800 520C382T400CF2B 33.0 13.5 2 1/2 x 5 5/8 890 520C891T500CB2B 118.0 5.9 2 1/2 x 3 1/8 4400 520C442T400DD2B 29.5 14.9 3 x 4 5/8 1100 520C112T500CJ2B 91.9 7.0 2 1/2 x 3 5/8 5000 520C502T400DE2B 28.8 15.6 3 x 5 1/8 1300 520C132T500DB2B 77.1 8.1 3 x 3 1/8 5200 520C522T400FC2D 33.5 14.8 3 1/2 x 4 1/8 1400 520C142T500CC2B 73.1 8.2 2 1/2 x 4 1/8 5700 520C572T400DF2B 25.6 17.0 3 x 5 5/8 1600 520C162T500CD2B 63.2 9.1 2 1/2 x 4 5/8 6100 520C612T400DP2B 24.3 17.7 3 x 5 7/8 1700 520C172T500DJ2B 60.1 9.7 3 x 3 5/8 6100 520C612T400FD2D 28.8 16.6 3 1/2 x 4 5/8 1900 520C192T500CD2B 54.9 10.1 2 1/2 x 5 1/8 7000 520C702T400FE2D 25.1 18.3 3 1/2 x 5 1/8 2100 520C212T500DC2B 49.4 11.1 3 x 4 1/8 8000 520C802T400FF2D 22.3 20.0 3 1/2 x 5 5/8 2200 520C222T500CF2B 46.2 11.4 2 1/2 x 5 5/8 8400 520C842T400DN2B 19.1 22.2 3 x 7 5/8 2500 520C252T500DD2B 42.0 12.5 3 x 4 5/8 8500 520C852T400FP2D 21.1 20.8 3 1/2 x 5 7/8 2900 520C292T500DE2B 36.5 13.8 3 x 5 1/8 9800 520C982T400DG2B 15.8 24.8 3 x 8 5/8 3000 520C302T500FC2D 35.7 14.4 3 1/2 x 4 1/8 12000 520C123T400FN2D 16.6 25.9 3 1/2 x 7 5/8 3300 520C332T500DF2B 32.4 15.1 3 x 5 5/8 14000 520C143T400FG2D 13.8 28.8 3 1/2 x 8 5/8 3500 520C352T500DP2B 30.6 15.8 3 x 5 7/8 3500 520C352T500FD2D 30.3 16.1 3 1/2 x 4 5/8 450 Vdc (500 Vdc Surge) 920 520C921T450CH2B 114.0 5.6 2 1/2 x 2 5/8 4000 520C402T500FE2D 26.4 17.8 3 1/2 x 5 1/8 1300 520C132T450CB2B 81.9 7.0 2 1/2 x 3 1/8 4600 520C462T500FF2D 23.4 19.5 3 1/2 x 5 5/8 1600 520C162T450CJ2B 63.5 8.4 2 1/2 x 3 5/8 4800 520C482T500FP2D 22.2 20.3 3 1/2 x 5 7/8 1900 520C192T450DB2B 52.6 9.8 3 x 3 1/8 4800 520C482T500DN2B 23.9 19.8 3 x 7 5/8 2000 520C202T450CC2B 49.8 9.9 2 1/2 x 4 1/8 5600 520C562T500DG2B 19.7 22.2 3 x 8 5/8 2400 520C242T450CD2B 42.3 11.1 2 1/2 x 4 5/8 6700 520C672T500FN2D 17.3 25.4 3 1/2 x 7 5/8 CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 Type 520C 85 °C Long Life, Inverter Grade, Aluminum High Ripple, Long Life Screw Terminal Type Typical Performance Curves Capacitance vs Frequency and Temperature 3600 µF 400 V 1 65 ºC 25 ºC 1.8 0.8 0 ºC 0.6 –20 ºC 0.4 0.2 –40 ºC 0 10 100 Ripple Life Test, 4700 ºF 400 Vdc (60 ºC, 360 V, 34 A @400 Hz) 2 85 ºC Ratio to Initial Value Ratio to 25 ºC, 120 Hz Value 1.2 1000 ESR 25 ºC 1.4 ESR 85 ºC 1.2 Capacitance 1 0.8 10000 Frequency (Hz) 1.6 100000 0 2000 4000 6000 8000 10000 12000 Time (hours) ESR vs Frequency and Temperature 3600 µF 400 V Ratio to 25 ºC, 120 Hz Value –20 ºC 10 0 ºC 1 Impedance vs Frequency and Temperature 3600 µF 400 V 100 –40 ºC 100 25 ºC 10 –40 ºC 1 –20 ºC 0 ºC 0.1 25 ºC 65 ºC 65 ºC 85 ºC 10 100 85 ºC 0.01 0.1 1000 10000 10 100000 100 1000 Frequency (Hz) Frequency (Hz) 10000 Type 520C Operating Life in Kilohours vs Ripple Current Type 520C Operating Life in Kilohours vs Ripple Current 1000 1000 45⁰C Expected Operating Life, kh Expected Operating Life, kh Ratio to 25 ºC, 120 Hz Value 1000 45 ºC 55⁰C 55 ºC 65⁰C 100 65 ºC 100 75⁰C 75 ºC 85⁰C 85 ºC 10 10 1 0 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0.1 0.2 0.3 0.4 1 1.1 1.2 1.3 1.4 1.5 0.5 0.6 0.7 0.8 Multiple 0.9 1 1.1 Rated Ripple-Current 1.2 1.3 1.4 1.5 Rated Ripple-Current Multiple CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 100000 Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.