Type SH 105 ºC Radial Leaded Aluminum Electrolytic

Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
2000 Hour Long Life, Aluminum Electrolytic
OR
LL
MA SH
Type SH is a radial leaded aluminum electrolytic capacitor with a +105 ºC, 2000 hour long life rating. The
SH is a high reliability product and is ideal for high
quality applications that require long life in high temperatures environments.
Y
Highlights
•
•
•
•
+105 ºC
2000 hours - long life
High reliability
Available in T&R and ammo pack
Specifications
Capacitance Range:
Voltage Range:
Capacitance Tolerance:
Operating Temperature Range:
DC Leakage Current:
Complies with the EU Directive
2002/95/EC requirement restricting
the use of Lead (Pb), Mercury (Hg),
Cadmium (Cd), Hexavalent chromium
(Cr(VI)), PolyBrominated Biphenyls
(PBB) and PolyBrominated Diphenyl
Ethers (PBDE).
Dissipation Factor @ 120 Hz, +25 ºC:
1.0 to 4700 µF
6.3 to 450 Vdc
±20%
–40 ºC to +105 ºC (–25 ºC for 160 to 450 Vdc)
After 2 minutes, 25 ºC at rated voltage
6.3 to 100 Vdc
I = .01CV + 3 µA Max
≥ 160 Vdc after voltage applied for 3 minutes
I = .03CV + 10 µA Max
C = Capacitance in (µF)
V = Rated voltage
I = Leakage current in µA
WV (V)
6.3 10 16 25 35 50 63 100 160-250 400-450
DF(%)
26 22 18 16 14 12 10
10
15
20
Above 1000 µF, the value of DF (%) is increased 2% for every additional 1000 µF
Ripple Multipliers for Frequency and Temperature:
Rated
Ripple Multipliers
WVDC
60Hz
120Hz
1kHz
10kHz
6 to 25
0.80
1.0
1.1
1.2
35 to 100
0.75
1.0
1.3
1.4
160 to 450
0.70
1.0
1.4
1.6
Ambient
Ripple
Temperature Multiplier
+105 ºC
1.00
+85 ºC
1.50
+70 ºC
1.80
Load Life Test: Apply Rated WVDC for 2000 hours at +105 ºC
Shelf Life:
Capacitance change within 20% of initial value
DF not to exceed 200% of initial requirement
DC Leakage current meets initial limits
1000 hrs @105 ºC with no voltage applied
Cap change within 20% of initial value
DF ≤ 200% of initial requirements
DC leakage current meets initial requirement
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
Outline Drawing
Outline Dimensions
(Millimeters)
PVC Sleeve
S 0.5
d 0.05
+
+
L
5
15 Min.
Case vented on
diameters 6.3 and greater
D
Vinyl sleeve adds .5 Max. to diameter
and 2.0 Max. to length
Part Numbering System
SH
100
Type
M
100
Capacitance
Rated
Capacitance Tolerance
(µF)
SH
S
T
Lead
Voltage
Packaging
Configuration
(%)
(Vdc)
1R0 = 1
K = ±10
6R3 = 6.3
A = Tape & Ammo
1 = Lead cut
100 = 10
M = ±20
010 = 10
E = Different Characteristic
2 = Lead form
101 = 100
100 = 100 R = Tape & Reel
102 = 1000
4 = Lead crimp & cut (form)
S = Standard
T = Standard
Temperature Characteristics
40
30
100
20
%C
50
47F 100V
10
%DF
0
100F 160V
-10
47F 100V
10
5
100F 160V
-20
-30
1
-40
0
40
80
Temperature C
120
-40
Capacitance Change Ratio
0
40
80
Temperature C
120
Dissipation Factor Change
Load Life Characteristics
100
10
%C
20
0
100F 160V
-10
47F 100V
-20
0
500
1000
1500
Time In Hours
2000
Capacitance Change Ratio
50
%DF 15
470F 25V
10
5
100F 160V
0
500
1000
1500
Time In Hours
2000
Dissipation Factor Change
%LC
10
5
100F 160V
47F 100V
1
0
500
1000
1500
Time In Hours
2000
Leakage Current Change
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
Ratings
Capacitance
(uF)
Catalog
Part Number
Max
ESR
Ripple Current
120
120 Hz/
Hz/+25°C
+105°C
(ohms)
(ma)
Size in. (mm)
Diameter
(D)
Length
(L)
Lead Space
(S)
Lead dia.
(d)
6.3 Vdc (8 Volts Surge)
47
SH470M6R3ST
7.34
65
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
100
SH101M6R3ST
3.45
100
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
220
SH221M6R3ST
1.57
165
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
330
SH331M6R3ST
1.04
200
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
470
SH471M6R3ST
0.73
280
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
1000
SH102M6R3ST
0.34
470
0.394
(10.0)
0.492
(12.5)
0.197
(5.0)
0.024
(0.6)
2200
SH222M6R3ST
0.17
930
0.512
(13.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
3300
SH332M6R3ST
0.12
1100
0.512
(13.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
4700
SH472M6R3ST
0.09
1320
0.630
(16.0)
0.984
(25.0)
0.295
(7.5)
0.031
(0.8)
47
SH470M010ST
6.21
75
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
10 Vdc (13 Volts Surge)
0.197
(5.0)
100
SH101M010ST
2.92
110
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
220
SH221M010ST
1.33
180
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
330
SH331M010ST
0.88
255
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
470
SH471M010ST
0.62
305
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
1000
SH102M010ST
0.29
570
0.394
(10.0)
0.630
(16.0)
0.197
(5.0)
0.024
(0.6)
2200
SH222M010ST
0.14
1010
0.512
(13.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
3300
SH332M010ST
0.10
1220
0.512
(13.0)
0.984
(25.0)
0.197
(5.0)
0.024
(0.6)
4700
SH472M010ST
0.08
1410
0.630
(16.0)
0.984
(25.0)
0.295
(7.5)
0.031
(0.8)
33
SH330M016ST
7.23
70
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
16 Vdc (20 Volts Surge)
0.197
(5.0)
47
SH470M016ST
5.08
85
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
100
SH101M016ST
2.39
135
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
220
SH221M016ST
1.09
235
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
330
SH331M016ST
0.72
285
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
470
SH471M016ST
0.51
395
0.394
(10.0)
0.492
(12.5)
0.197
(5.0)
0.024
(0.6)
1000
SH102M016ST
0.24
700
0.394
(10.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
2200
SH222M016ST
0.12
1150
0.512
(13.0)
0.984
(25.0)
0.197
(5.0)
0.024
(0.6)
3300
SH332M016ST
0.09
1350
0.630
(16.0)
0.984
(25.0)
0.295
(7.5)
0.031
(0.8)
4700
SH472M016ST
0.07
1560
0.630
(16.0)
1.26
(32.0)
0.295
(7.5)
0.031
(0.8)
25 Vdc (32 Volts Surge)
10
SH100M025ST
21.22
39
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
22
SH220M025ST
9.65
60
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
33
SH330M025ST
6.43
75
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
47
SH470M025ST
4.52
90
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
100
SH101M025ST
2.12
145
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
220
SH221M025ST
0.96
250
0.394
(10.0)
0.492
(12.5)
0.197
(5.0)
0.024
(0.6)
330
SH331M025ST
0.64
355
0.394
(10.0)
0.492
(12.5)
0.197
(5.0)
0.024
(0.6)
470
SH471M025ST
0.45
470
0.394
(10.0)
0.630
(16.0)
0.197
(5.0)
0.024
(0.6)
1000
SH102M025ST
0.21
855
0.512
(13.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
2200
SH222M025ST
0.11
1230
0.630
(16.0)
0.984
(25.0)
0.295
(7.5)
0.031
(0.8)
3300
SH332M025ST
0.08
1450
0.630
(16.0)
1.26
(32.0)
0.295
(7.5)
0.031
(0.8)
4700
SH472M025ST
0.06
1690
0.709
(18.0)
1.40
(36.0)
0.295
(7.5)
0.031
(0.8)
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
Ratings
Capacitance
(uF)
Catalog
Part Number
Max
ESR
Ripple Current
120
120 Hz/
Hz/+25°C
+105°C
(ohms)
(ma)
Size in. (mm)
Diameter
(D)
Length
(L)
Lead Space
(S)
Lead dia.
(d)
35 Vdc (44 Volts Surge)
10
SH100M035ST
18.57
40
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
22
SH220M035ST
8.44
65
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
33
SH330M035ST
5.63
85
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
47
SH470M035ST
3.95
115
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
100
SH101M035ST
1.86
190
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
220
SH221M035ST
0.84
315
0.394
(10.0)
0.492
(12.5)
0.197
(5.0)
0.024
(0.6)
330
SH331M035ST
0.56
440
0.394
(10.0)
0.630
(16.0)
0.197
(5.0)
0.024
(0.6)
470
SH471M035ST
0.40
580
0.512
(13.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
1000
SH102M035ST
0.19
995
0.512
(13.0)
0.984
(25.0)
0.197
(5.0)
0.024
(0.6)
2200
SH222M035ST
0.10
1450
0.630
(16.0)
1.26
(32.0)
0.295
(7.5)
0.031
(0.8)
3300
SH332M035ST
0.07
1660
0.709
(18.0)
1.40
(36.0)
0.295
(7.5)
0.031
(0.8)
1
SH010M050ST
159.15
12
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
2.2
SH2R2M050ST
72.34
18
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
3.3
SH3R3M050ST
48.23
25
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
4.7
SH4R7M050ST
33.86
30
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
10
SH100M050ST
15.92
50
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
22
SH220M050ST
7.23
75
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
33
SH330M050ST
4.82
105
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
47
SH470M050ST
3.39
125
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
50 Vdc (63 Volts Surge)
100
SH101M050ST
1.59
210
0.394
(10.0)
0.492
(12.5)
0.197
(5.0)
0.024
(0.6)
220
SH221M050ST
0.72
400
0.394
(10.0)
0.630
(16.0)
0.197
(5.0)
0.024
(0.6)
330
SH331M050ST
0.48
535
0.394
(10.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
470
SH471M050ST
0.34
730
0.512
(13.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
1000
SH102M050ST
0.16
1110
0.630
(16.0)
0.984
(25.0)
0.295
(7.5)
0.031
(0.8)
2200
SH222M050ST
0.08
1530
0.709
(18.0)
1.40
(36.0)
0.295
(7.5)
0.031
(0.8)
63 Vdc (79 Volts Surge)
4.7
SH4R7M063ST
28.22
34
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
10
SH100M063ST
13.26
55
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
22
SH220M063ST
6.03
90
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
33
SH330M063ST
4.02
110
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
47
SH470M063ST
2.82
155
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
100
SH101M063ST
1.33
260
0.394
(10.0)
0.492
(12.5)
0.197
(5.0)
0.024
(0.6)
220
SH221M063ST
0.60
460
0.394
(10.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
330
SH331M063ST
0.40
650
0.512
(13.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
470
SH471M063ST
0.28
800
0.512
(13.0)
0.984
(25.0)
0.197
(5.0)
0.024
(0.6)
1000
SH102M063ST
0.13
1200
0.630
(16.0)
1.26
(32.0)
0.295
(7.5)
0.031
(0.8)
100 Vdc (125 Volts Surge)
1
SH010M100ST
132.63
15
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
2.2
SH2R2M100ST
60.29
22
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
3.3
SH3R3M100ST
40.19
29
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
4.7
SH4R7M100ST
28.22
37
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
10
SH100M100ST
13.26
65
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
22
SH220M100ST
6.03
115
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
Ratings
Capacitance
(uF)
Catalog
Part Number
33
SH330M100ST
Max
ESR
Ripple Current
120
120 Hz/
Hz/+25°C
+105°C
(ohms)
(ma)
Size in. (mm)
Diameter
(D)
Length
(L)
Lead Space
(S)
Lead dia.
(d)
100 Vdc (125 Volts Surge)
4.02
160
0.394
(10.0)
0.492
(12.5)
0.197
(5.0)
0.024
(0.6)
47
SH470M100ST
2.82
210
0.394
(10.0)
0.630
(16.0)
0.197
(5.0)
0.024
(0.6)
100
SH101M100ST
1.33
385
0.512
(13.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
220
SH221M100ST
0.60
590
0.630
(16.0)
0.984
(25.0)
0.295
(7.5)
0.031
(0.8)
330
SH331M100ST
0.40
720
0.630
(16.0)
0.984
(25.0)
0.295
(7.5)
0.031
(0.8)
470
SH471M100ST
0.28
875
0.630
(16.0)
1.26
(32.0)
0.295
(7.5)
0.031
(0.8)
*160 Vdc (200 Volts Surge)
1
SH010M160ST
198.94
17
0.197
(5.0)
0.433
(11.0)
0.079
(2.0)
0.020
(0.5)
2.2
SH2R2M160ST
90.43
25
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
3.3
SH3R3M160ST
60.29
36
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
4.7
SH4R7M160ST
42.33
43
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
10
SH100M160ST
19.89
70
0.394
(10.0)
0.492
(12.5)
0.197
(5.0)
0.024
(0.6)
22
SH220M160ST
9.04
130
0.394
(10.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
33
SH330M160ST
6.03
180
0.512
(13.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
47
SH470M160ST
4.23
270
0.512
(13.0)
0.984
(25.0)
0.197
(5.0)
0.024
(0.6)
100
SH101M160ST
1.99
330
0.630
(16.0)
0.984
(25.0)
0.295
(7.5)
0.031
(0.8)
*200 Vdc (250 Volts Surge)
1
SH010M200ST
198.94
17
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
2.2
SH2R2M200ST
90.43
25
0.248
(6.3)
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
3.3
SH3R3M200ST
60.29
36
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
4.7
SH4R7M200ST
42.33
50
0.394
(10.0)
0.492
(12.5)
0.197
(5.0)
0.024
(0.6)
10
SH100M200ST
19.89
80
0.394
(10.0)
0.630
(16.0)
0.197
(5.0)
0.024
(0.6)
22
SH220M200ST
9.04
140
0.394
(10.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
33
SH330M200ST
6.03
190
0.512
(13.0)
0.984
(25.0)
0.197
(5.0)
0.024
(0.6)
47
SH470M200ST
4.23
220
0.512
(13.0)
0.984
(25.0)
0.197
(5.0)
0.024
(0.6)
100
SH101M200ST
1.99
335
0.630
(16.0)
1.26
(32.0)
0.295
(7.5)
0.031
(0.8)
1
SH010M250ST
198.94
17
0.248
0.433
(11.0)
0.098
(2.5)
0.020
(0.5)
2.2
SH2R2M250ST
90.43
29
0.315
(8.0)
0.433
(11.0)
0.138
(3.5)
0.024
(0.6)
3.3
SH3R3M250ST
60.29
42
0.394
(10.0)
0.492
(12.5)
0.197
(5.0)
0.024
(0.6)
4.7
SH4R7M250ST
42.33
50
0.394
(10.0)
0.492
(12.5)
0.197
(5.0)
0.024
(0.6)
10
SH100M250ST
19.89
88
0.394
(10.0)
0.787
(20.0)
0.197
(5.0)
0.024
(0.6)
*250 Vdc (300 Volts Surge)
(6.3)
22
SH220M250ST
9.04
155
0.512
(13.0)
0.984
(25.0)
0.197
(5.0)
0.024
(0.6)
33
SH330M250ST
6.03
190
0.512
(13.0)
0.984
(25.0)
0.197
(5.0)
0.024
(0.6)
47
SH470M250ST
4.23
230
0.630
(16.0)
0.984
(25.0)
0.295
(7.5)
0.031
(0.8)
100
SH101M250ST
1.99
340
0.709
(18.0)
1.40
(36.0)
0.295
(7.5)
0.031
(0.8)
22
SH220M400ST
12.06
110
0.984
(25.0)
0.295
(7.5)
0.031
(0.8)
10
SH100M450ST
26.53
0.984
(25.0)
0.197
(5.0)
0.024
(0.6)
*400 Vdc (450 Volts Surge)
0.630
(16.0)
*450 Vdc (500 Volts Surge)
80
0.512
(13.0)
* Over 160 Vdc the ripple is measured at 85 ºC
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
Taping & Packaging
Fig. 1 - Formed Taping
P2
h
P
D
P2
h
P
D
A
P1
H
Fig. 2 - Straight Taping (5Φ, 6.3Φ, 8Φ)
F
H1
P1
H
A
F
t
H0
t
W0 W
d
P0
W0 W
D0
h
P
D
P2
h
P
D
A
P1
H
D0
Fig. 4- Straight Taping (16Φ, 18Φ)
Fig. 3- Straight Taping (Under 10Φ, 12Φ, 13Φ)
P2
d
P0
A
F
P1
H
F
t
t
W0 W
d
P0
W0 W
D0
d
P0
D0
Standard Lead Spacing of Taped Components is 5mm
Other Lead Spacing is Available by Special Order
D
Code
Tolerance
Item
Capacitor
Diameter
D
(mm)
4
5
6.3
8
10 (12 L)
10 (16 L)
10 (20 L)
12, 13
16
A
P
P0
P1
P2
F
W
W0
H
H0
D0
t
ih
±0.5
Min.
±0.75
±0.5
±0.2
±0.2
Max.
1.0
±0.05
±1.0
±0.2
±0.7
±1.3
4 ~ 6.3
7.0
0.45
12.7
12.7
3.85
6.35
+0.8
-0.2
5.0
18.0
12.5
18.5
16.0
4.0
0.7
2.0
5~8
12.5
0.5
12.7
12.7
3.85
6.35
5.0
18.0
12.5
18.5
16.0
4.0
0.7
2.0
5, 6.3
12.5
0.5
12.7
12.7
5.1
6.35
2.5
18.0
12.5
18.5
4.0
0.7
2.0
8
12.5
0.5
12.7
12.7
4.6
6.35
3.5
18.0
12.5
18.5
4.0
0.7
2.0
10
12, 13
16, 18
21.0
26.0
26.0
0.6
0.6
0.8
12.7
15.0
30.0
12.7
15.0
15.0
3.85
5.0
3.75
6.35
7.5
7.5
5.0
5.0
7.5
18.0
18.0
18.0
12.5
12.5
12.5
18.5
18.5
18.0
4.0
4.0
4.0
0.7
0.7
0.7
2.0
2.0
2.0
0.5
Ammo Pack Box
Dimensions (mm)
A±5
d
B Max
C±3
Quantity
Per
Ammo Pack Box
250340 54
250340 54
290340 54
250340 54
290 340
54
350 340
59
340 340
71
340 340
71
34034071
3000
2,000
2,000
1,000
600
600
600
400
300
1
2
3
4
Tape And Reel Quantities
Case
Diameter
Reel
Reel Qty. D ( mm)
Width
(Pcs.)
Ammo Pack
A
C
Fig.
B
Ammo Pack boxes are shipped 5
to the outer packing carton
4
5
6
8
10 (12L)
10 (16L)
12, 13
16
44
44
44
44
44
50
-
1500
1200
1000
800
600
600
-
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com