Type CDA15 Especially for Reel-Packed, Mica Capacitors Best Value Choice for Auto Insertion Applications Type CDA15 is designed especially for auto-insertion and is the best value choice for tape and reel and ammo-pack feed systems. CDA15 is used in commercial and industrial applications requiring high stability, high Q and close capacitance tolerances. Type CDA15 is ideal for tuned circuits, delay lines and filter circuits. H Max. Highlights ♦ Measured at point where phenolic cone becomes a cylinder S ±.031. .078. Max. no solder ♦ 1. Min. ♦ ♦ ♦ Specifications Available only on tape/reel or ammo pack High temperature — up to 150 ºC 100,000 V/µs dV/dt pulse capability minimum Non-flammable units that meet IEC 695-2-2 are available. 0.200” lead spacing 1 pF to 1,500pF 100 Vdc to 500 Vdc ±½ pF (D), ±1 pF (C), ±½% (E), ±1% (F), ±2% (G), ±5% (J) Temperature Range: –55 ºC to +125 ºC (O) –55 ºC to +150 ºC (P) Lead Material: Copper For RoHS compliant add the letter F at the end of the part number. Ratings Capacitance Range: Voltage Range: Capacitance Tolerance: Cap Catalog L H T Cap Catalog L H T (pF) Part Number In (mm) In (mm) In (mm) (pF) Part Number In (mm) In (mm) In (mm) 910 CDA15FA911J03 .450 (11.4) .400 (10.2) .170 (4.3) 39 CDA15ED390J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 1000 CDA15FA102J03 .450 (11.4) .400 (10.2) .170 (4.3) 43 CDA15ED430J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 1100 CDA15FA112J03 .460 (11.7) .400 (10.2) .180 (4.6) 47 CDA15ED470J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 1200 CDA15FA122J03 .460 (11.7) .420 (10.7) .180 (4.6) 50 CDA15ED500J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 1500 CDA15FA152J03 .460 (11.7) .430 (10.9) .180 (4.6) 51 CDA15ED510J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 56 CDA15ED560J03 .430 (10.9) .360 (9.1) .140 (3.6) 100 Vdc 300 Vdc .200" (5.1) L/S 500 Vdc .200" (5.1) L/S .200" (5.1) L/S 560 CDA15FC561J03 .450 (11.4) .380 ( 9.7) .160 (4.1) 62 CDA15ED620J03 .430 (10.9) .360 (9.1) .140 (3.6) 620 CDA15FC621J03 .450 (11.4) .380 ( 9.7) .160 (4.1) 68 CDA15ED680J03 .430 (10.9) .360 (9.1) .140 (3.6) 680 CDA15FC681J03 .450 (11.4) .390 ( 9.9) .160 (4.1) 75 CDA15ED750J03 .430 (10.9) .360 (9.1) .140 (3.6) 750 CDA15FC751J03 .450 (11.4) .390 ( 9.9) .170 (4.3) 82 CDA15ED820J03 .430 (10.9) .360 (9.1) .140 (3.6) 820 CDA15FC821J03 .450 (11.4) .390 ( 9.9) .170 (4.3) 91 CDA15FD910J03 .430 (10.9) .360 (9.1) .140 (3.6) 100 CDA15FD101J03 .430 (10.9) .360 (9.1) .140 (3.6) 500 Vdc .200" (5.1) L/S 1 CDA15CD010D03 .430 (10.9) .360 ( 9.1) .140 (3.6) 110 CDA15FD111J03 .440 (11.2) .360 (9.1) .150 (3.8) 2 CDA15CD020D03 .430 (10.9) .360 ( 9.1) .140 (3.6) 120 CDA15FD121J03 .440 (11.2) .360 (9.1) .150 (3.8) 3 CDA15CD030D03 .430 (10.9) .360 ( 9.1) .140 (3.6) 130 CDA15FD131J03 .440 (11.2) .360 (9.1) .150 (3.8) 4 CDA15CD040D03 .430 (10.9) .360 ( 9.1) .140 (3.6) 150 CDA15FD151J03 .440 (11.2) .360 (9.1) .150 (3.8) 5 CDA15CD050D03 .430 (10.9) .360 ( 9.1) .140 (3.6) 160 CDA15FD161J03 .440 (11.2) .360 (9.1) .150 (3.8) 6 CDA15CD060D03 .430 (10.9) .360 ( 9.1) .140 (3.6) 180 CDA15FD181J03 .440 (11.2) .360 (9.1) .160 (4.1) 7 CDA15CD070D03 .430 (10.9) .360 ( 9.1) .140 (3.6) 200 CDA15FD201J03 .440 (11.2) .360 (9.1) .160 (4.1) 8 CDA15CD080D03 .430 (10.9) .360 ( 9.1) .140 (3.6) 220 CDA15FD221J03 .440 (11.2) .360 (9.1) .160 (4.1) 10 CDA15CD100J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 240 CDA15FD241J03 .440 (11.2) .360 (9.1) .160 (4.1) 12 CDA15CD120J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 250 CDA15FD251J03 .440 (11.2) .360 (9.1) .160 (4.1) 15 CDA15CD150J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 270 CDA15FD271J03 .440 (11.2) .360 (9.1) .160 (4.1) 18 CDA15CD180J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 300 CDA15FD301J03 .440 (11.2) .360 (9.1) .160 (4.1) 20 CDA15ED200J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 330 CDA15FD331J03 .440 (11.2) .360 (9.1) .160 (4.1) 22 CDA15ED220J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 360 CDA15FD361J03 .440 (11.2) .370 (9.4) .160 (4.1) 24 CDA15ED240J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 390 CDA15FD391J03 .440 (11.2) .370 (9.4) .160 (4.1) 27 CDA15ED270J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 430 CDA15FD431J03 .440 (11.2) .380 (9.7) .160 (4.1) 30 CDA15ED300J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 470 CDA15FD471J03 .440 (11.2) .380 (9.7) .160 (4.1) 33 CDA15ED330J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 500 CDA15FD501J03 .440 (11.2) .380 (9.7) .160 (4.1) 36 CDA15ED360J03 .430 (10.9) .360 ( 9.1) .140 (3.6) 510 CDA15FD511J03 .440 (11.2) .380 (9.7) .160 (4.1) Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde. com Type CDA15 Especially for Reel-Packed, Mica Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde. com