Type PS, Orange Drop®, Polypropylene Film Capacitors Features • Radial-lead. Non-inductively wound, extended foil construction. • Long established distribution series. Insulation Resistance: Specifications At +25°C the minimum product of insulation resistance, expressed in megohms, and capacitance, expressed in microfarads, shall be 5000 M⍀-µF Capacitance Range: .001 to .5 µF Capacitance Tolerance: ±10% Dissipation Factor: Units rated 200 thru 1000 VDC: 0.75% Maximum Units rated 1600 and 2000 VDC: 0.1% Maximum Voltage Ratings: 200 to 2000 Volts D-C 140 to 500 Volts A-C Operating Temperature Range: Encapsulation: Conformal coating of orange, flame retardant epoxy. Meets minimum of UL94V-0 specifications. -40°C to +85°C (at full voltage) Dielectric/Construction: Voltage Derating: Units rated 200 thru 1000 VDC: at +105°C, 70% of +85°C rating. at +125°C, 50% of +85°C rating. Units rated 1600 and 2000 VDC: at +105°C, 50% of +85°C rating. Lead Wire: Tinned copper-clad steel. 0.032 (0.8) diameter, #20 AWG Units rated 200 thru 1000 VDC: Polyester film, single section design, noninductively wound with extended foil. However, the exception is part # 6PSP47 which is a metallized polyester film design. Units rated 1600 and 2000 VDC: Polypropylene film, non-inductively wound, series section design with extended foil and utilizing a floating common of metallized polypropylene film. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type PS, Orange Drop®, Polypropylene Film Capacitors Ordering/Part Number Information 6 PS P 10 Capacitance, Significant Figures Capacitance, Decimal Locator D = .00XX S = .0XX P = .XX XX, significant figures CDE Type Number D-C Voltage Rating In Hundreds of Volts Dimensions Standard Marking Format Marking CDE 6PS-P10 104K600V 9810 Description CDE 6PS-P10 600V 104K 9810 CDE Electronics identification Part number D-C Voltage rating, Volts Capacitance and EIA tolerance code* Weekly date code (i.e. 10th week of 1998) * Capacitance code expressed in picofarads, first two digits are the significant figures, the third is the number of zeros following (i.e. 104 = 100000pF = .1 µF). EIA tolerance code: K = ±10%. Note: The PS series was primarily designed for DC applications. If you require additional technical data or application information for an AC application we suggest you contact us. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type PS, Orange Drop®, Polypropylene Film Capacitors Type PS Standard Sizes/Ratings Value, µF Part # 1 L MAX DIA MAX S Value, µF Part # 1 200 VDC / 140 VAC* L MAX DIA MAX S 600 VDC / 200 VAC* .02 .022 .047 .05 2PSS20 2PSS22 2PSS47 2PSS50 .70 (17.8) .70 (17.8) .90 (22.9) .90 (22.9) .33 (8.4) .33 (8.4) .38 (9.7) .38 (9.7) .500 .500 .688 .688 .1 .15 .2 .22 .25 2PSP10 2PSP15 2PSP20 2PSP22 2PSP25 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) .40 (10.2) .45 (11.4) .50 (12.7) .50 (12.7) .50 (12.7) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .33 .47 .5 2PSP33 2PSP47 2PSP50 1.60 (40.6) 1.60 (40.6) 1.60 (40.6) .47 (11.9) .55 (14.0) .55 (14.0) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) (12.7) (12.7) (17.5) (17.5) 400 VDC / 200 VAC* .01 .015 4PSS10 4PSS15 .70 (17.8) .70 (17.8) .35 (8.9) .38 (9.7) .500 (12.7) .500 (12.7) .02 .022 .025 .03 .033 4PSS20 4PSS22 4PSS25 4PSS30 4PSS33 .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .38 (9.7) .38 (9.7) .40 (10.2) .40 (10.2) .40 (10.2) .688 (17.5) .688 (17.5) .688 (17.5) .688 (17.5) .688 (17.5) .04 .047 .05 .056 .068 .075 .1 .15 4PSS40 4PSS47 4PSS50 4PSS56 4PSS68 4PSS75 4PSP10 4PSP15 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) .40 (10.2) .40 (10.2) .40 (10.2) .45 (11.4) .45 (11.4) .45 (11.4) .52 (13.2) .57 (14.5) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .2 .22 .25 4PSP20 4PSP22 4PSP25 1.60 (40.6) 1.60 (40.6) 1.60 (40.6) .60 (15.2) .60 (15.2) .65 (16.5) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 600 VDC / 200 VAC* .001 .0012 .0015 .0018 6PSD10 6PSD12 6PSD15 6PSD18 .70 .70 .70 .70 (17.8) (17.8) (17.8) (17.8) .30 (7.6) .33 (8.4) .33 (8.4) .33 (8.4) .500 (12.7) .500 (12.7) .500 (12.7) .500 (12.7) .002 .0022 .0025 .0027 6PSD20 6PSD22 6PSD25 6PSD27 .70 .70 .70 .70 (17.8) (17.8) (17.8) (17.8) .33 (8.4) .33 (8.4) .35 (8.9) .35 (8.9) .500 .500 .500 .500 (12.7) (12.7) (12.7) (12.7) .003 .0033 .0039 .004 .0047 6PSD30 6PSD33 6PSD39 6PSD40 6PSD47 .70 .70 .70 .70 .70 .005 .0056 .006 .0068 .0075 6PSD50 6PSD56 6PSD60 6PSD68 6PSD75 .008 .0082 .01 .012 (17.8) (17.8) (17.8) (17.8) (17.8) .35 (8.9) .35 (8.9) .38 (9.7) .38 (9.7) .38 (9.7) .500 (12.7) .500 (12.7) .500 (12.7) .500 (12.7) .500 (12.7) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .38 (9.7) .40 (10.2) .40 (10.2) .40 (10.2) .40 (10.2) .500 (12.7) .500 (12.7) .500 (12.7) .500 (12.7) .500 (12.7) 6PSD80 6PSD82 6PSS10 6PSS12 .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .40 (10.2) .40 (10.2) .40 (10.2) .40 (10.2) .688 (17.5) .688 (17.5) .688 (17.5) .688 (17.5) .015 .02 .022 .025 6PSS15 6PSS20 6PSS22 6PSS25 .90 .90 .90 .90 .40 (10.2) .45 (11.4) .45 (11.4) .45 (11.4) .688 (17.5) .688 (17.5) .688 (17.5) .688 (17.5) .027 .03 .033 .035 .039 6PSS27 6PSS30 6PSS33 6PSS35 6PSS39 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) .45 (11.4) .45 (11.4) .45 (11.4) .45 (11.4) .55 (14.0) .969 .969 .969 .969 .969 (24.6) (24.6) (24.6) (24.6) (24.6) .04 .047 .05 .056 6PSS40 6PSS47 6PSS50 6PSS56 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) .55 .55 .55 .60 .969 .969 .969 .969 (24.6) (24.6) (24.6) (24.6) .06 .068 .075 .082 .1 6PSS60 6PSS68 6PSS75 6PSS82 6PSP10 1.20 1.20 1.20 1.20 1.20 (30.5) (30.5) (30.5) (30.5) (30.5) .60 (15.2) .60 (15.2) .60 (15.2) .65 (16.5) .65 (16.5) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .15 .25 6PSP15 6PSP20 6PSP22 6PSP25 1.60 1.60 1.60 1.60 (40.6) (40.6) (40.6) (40.6) .70 (17.8) .80 (20.3) .80 (20.3) .80 (20.3) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) .33 6PSP33 1.81 (46.0) .89 (22.6) 1.531 (38.9) .47 6PSP47 1.50 (38.1) See note below 1.344 (34.1) .2 .22 (22.9) (22.9) (22.9) (22.9) (14.0) (14.0) (14.0) (15.2) * 60 Hz, RMS 1 Shaded part numbers above are standard stock items available through the Sprague/Vishay Distribution Network. Any other part number may be ordered as a special. Note: 6PSP47 has a pressed profile, therefore the physical body dimensions are: T MAX = .51 (13.0) and H MAX = .76 (19.3) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type PS, Orange Drop®, Polypropylene Film Capacitors Type PS Standard Sizes/Ratings Value, µF Part # 1 L MAX DIA MAX S Value, µF Part # 1000 VDC / 200 VAC* 1 L MAX DIA MAX S 1600 VDC / 475 VAC* .001 .0015 .002 .0022 10PSD10 10PSD15 10PSD20 10PSD22 .70 (17.8) .70 (17.8) .70 (17.8) .70 (17.8) .33 (8.4) .33 (8.4) .35 (8.9) .35 (8.9) .500 (12.7) .500 (12.7) .500 (12.7) .500 (12.7) .005 .006 .0068 .007 16PSD50 16PSD60 16PSD68 16PSD70 1.30 (33.0) 1.30 (33.0) 1.30 (33.0) 1.30 (33.0) .50 (12.7) .55 (14.0) .55 (14.0) .55 (14.0) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .0033 .004 .005 .0068 .01 10PSD33 10PSD40 10PSD50 10PSD68 10PSS10 .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .90 (22.9) .35 (8.9) .40 (10.2) .40 (10.2) .43 (10.9) .48 (12.2) .688 (17.5) .688 (17.5) .688 (17.5) .688 (17.5) .688 (17.5) .0075 .008 .01 .015 16PSD75 16PSD80 16PSS10 16PSS15 1.30 (33.0) 1.30 (33.0) 1.30 (33.0) 1.30 (33.0) .55 (14.0) .60 (15.2) .60 (15.2) .65 (16.5) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .015 .022 .033 10PSS15 10PSS22 10PSS33 1.20 (30.5) 1.20 (30.5) 1.20 (30.5) .48 (12.2) .58 (14.7) .65 (16.5) .969 (24.6) .969 (24.6) .969 (24.6) .018 .02 .022 .03 16PSS18 16PSS20 16PSS22 16PSS30 1.70 (43.2) 1.70 (43.2) 1.70 (43.2) 1.70 (43.2) .65 (16.5) .65 (16.5) .65 (16.5) .75 (19.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) .039 .047 .056 .068 .1 10PSS39 10PSS47 10PSS56 10PSS68 10PSP10 1.60 (40.6) 1.60 (40.6) 1.60 (40.6) 1.60 (40.6) 1.60 (40.6) .65 (16.5) .65 (16.5) .75 (19.1) .75 (19.1) .85 (21.6) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) .033 .039 .04 .047 .05 16PSS33 16PSS39 16PSS40 16PSS47 16PSS50 1.70 (43.2) 1.70 (43.2) 1.70 (43.2) 1.70 (43.2) 1.70 (43.2) .75 (19.1) .85 (21.6) .85 (21.6) .85 (21.6) .85 (21.6) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 1.344 (34.1) 2000 VDC / 500 VAC* 1600 VDC / 475 VAC* .0015 .002 .0022 16PSD10 16PSD15 16PSD20 16PSD22 1.30 (33.0) 1.30 (33.0) 1.30 (33.0) 1.30 (33.0) .50 (12.7) .50 (12.7) .50 (12.7) .50 (12.7) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .001 .0015 .0022 .0033 20PSD10 20PSD15 20PSD22 20PSD33 1.30 1.30 1.30 1.30 (33.0) (33.0) (33.0) (33.0) .50 (12.7) .50 (12.7) .50 (12.7) .55 (14.0) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .003 .0033 .0039 .004 .0047 16PSD30 16PSD33 16PSD39 16PSD40 16PSD47 1.30 (33.0) 1.30 (33.0) 1.30 (33.0) 1.30 (33.0) 1.30 (33.0) .50 (12.7) .50 (12.7) .50 (12.7) .50 (12.7) .50 (12.7) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) .0047 .0056 .0068 .0082 .027 20PSD47 20PSD56 20PSD68 20PSD82 20PSS27 1.30 (33.0) 1.30 (33.0) 1.30 (33.0) 1.30 (33.0) 1.70 (43.2) .60 (15.2) .65 (16.5) .65 (16.5) .70 (17.8) .95 (24.1) .969 (24.6) .969 (24.6) .969 (24.6) .969 (24.6) 1.344 (34.1) .001 * 60 Hz, RMS 1 Shaded part numbers above are standard stock items available through the Sprague/Vishay Distribution Network. Any other part number may be ordered as a special. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 AC Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. 4