Tol (nH) % Q Min. SRF RDC IDC Min. MAX IN (MHz) ( ) SPECIFICATION TYPE = CONSTRUCTION = TERIMAL COATING = OPERATING TEMP. = STORAGE TEMP = INSULATION RESISTANCE = DIELECTRIC STREGTH = HUMIDITY EFFECTS = (mA) CCFH1210-010 10 @50MHz K CCFH1210-012 12 @50MHz K 50 @500MHz 4100 0.08 1000 50 @500MHz 3300 0.09 1000 CCFH1210-015 15 @50MHz K 50 @500MHz 2500 CCFH1210-018 18 @50MHz J,K 50 @350MHz 2500 0.11 1000 J,K 55 @350MHz 2400 0.12 1000 0.1 1000 CCFH1210-022 22 @50MHz CCFH1210-027 27 @50MHz G,J,K 55 @350MHz 1600 0.13 1000 CCFH1210-033 33 @50MHz G,J,K 60 @350MHz 1600 0.14 1000 CCFH1210-039 39 @50MHz G,J,K 60 @350MHz 1500 0.15 1000 CCFH1210-047 47 @50MHz G,J,K 65 @350MHz 1500 0.16 1000 CCFH1210-056 56 @50MHz G,J,K 65 @350MHz 1300 0.18 1000 CCFH1210-068 68 @50MHz G,J,K 65 @350MHz 1300 CCFH1210-082 82 @50MHz G,J,K 60 @350MHz 1000 0.22 1000 PACKAGING MARKING NOTE 0.2 1000 CCFH1210-R10 100 @25MHz G,J,K 60 @350MHz 1000 0.24 980 CCFH1210-R12 120 @25MHz G,J,K 60 @350MHz 950 0.26 920 CCFH1210-R15 150 @25MHz G,J,K 50 @100MHz 850 0.29 870 CCFH1210-R18 180 @25MHz G,J,K 50 @100MHz 750 0.31 830 CCFH1210-R22 220 @25MHz G,J,K 50 @100MHz 700 0.35 790 CCFH1210-R27 270 @25MHz G,J,K 45 @100MHz 600 0.42 730 CCFH1210-R33 330 @25MHz G,J,K 45 @100MHz 570 0.49 680 CCFH1210-R39 390 @25MHz G,J,K 45 @100MHz 500 0.54 640 CCFH1210-R47 470 @25MHz G,J,K 45 @100MHz 450 0.6 610 CCFH1210-R56 560 @25MHz G,J,K 45 @100MHz 415 1 460 CCFH1210-R68 680 @25MHz G,J,K 45 @100MHz 375 CCFH1210-R82 820 @25MHz G,J,K 45 @100MHz 350 1.93 350 CCFH1210-1R0 1000 @25MHz G,J,K 35 @50MHz 290 2.16 330 CCFH1210-1R2 1200 @7.9MHz J,K 35 @50MHz 250 2.38 310 CCFH1210-1R5 1500 @7.9MHz J,K 25 @50MHz 200 2.64 300 CCFH1210-1R8 1800 @7.9MHz J,K 25 @50MHz 160 2.76 290 CCFH1210-2R2 2200 @7.9MHz J,K 25 @50MHz 160 2.98 280 CCFH1210-2R7 2700 @7.9MHz J,K 25 @25MHz 140 3.3 CCFH1210-3R3 3300 @7.9MHz J,K 25 @25MHz 110 3.66 250 CCFH1210-3R9 3900 @7.9MHz J,K 20 @25MHz 100 4 240 CCFH1210-4R7 4700 @7.9MHz J,K 20 @25MHz 90 4.3 230 CCFH1210 WOUND CERAMIC CHIP SILVER/GOLD FLASH -40 TO +125 C -55 TO +155 C 100MOhm. 100V TERMINAL-CORE 250Vac TERMINAL-CORE L 5 @ 95%RH, 40 C, 1HR Q 5 @ 95%RH, 40 C, 1HR = 2000PCS/REEL = NONE TOLERANCES G=2%; J=5%; K=10%. 2.23 L 2.92 3.56 1.15 420 1.02 1.78 1.02 2.54 Part 260 NAME PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AIT COMPONENTS LTD. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF AIT COMPONENTS LTD IS STRICTLY PROHIBITED. MATERIAL FINISH DATE AIT COMPONENTS LTD www.aitcomponents.com DRAWN CHECKED ENG APPR. -- UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES: ONE PLACE DECIMAL +/-0.3 TWO PLACE DECIMAL +/-0.13 ANGLE +/-1 DEGREE -- DO NOT SCALE DRAWING TITLE: CCFH1210 WIRE WOUND COIL SIZE A DWG. NO. SCALE:1:1 CCFH1210 WIRE WOUND COIL SHEET 1 OF 1 REV. 00