FIBER OPTIC MATRICES Fiber Optic 7001 | C-band Crossbar/Fan-Out Features Input/Output Configurations Operating Frequency Manual Control Remote Control 16x16 Matrix utilized as 8x14 Crossbar with two 1x4 Fan-Out Segments 1530-1565 nm (C-band) LCD Touch Screen Ethernet Part Number 7001 7001 Application RF Characteristics The 7001 models is a non-blocking 16x16 matrix with MEMS optical switches and splitters and it is configured as a 8x14 crossbar with two 1x4 fan-out switch segments. It switches input-to-output paths in pure optical domain with a operating wavelength of 1530-1565 nm in C-band. The crossbar segment routes any input signal to any output port such that the path between the I/O ports is unique at any given time. Whereas the fan-out configuration re-routes outputs 15 &16 back to inputs 9-to-12 & 13-to-16 respectively to make two 1x4 fanout segments. See appendix C for more details. This model is equipped with a MS Windows based PC, removable SATA hard drive and redundant power supplies with LED monitoring and guarded power switch on the front panel. Locally it can be controlled through an LCD touch screen with Graphical User Interface (GUI) and remotely through Ethernet. Crossbar Segment Fan-Out Segment Insertion Loss (1) (max) 2 dB 1.60 dB Crosstalk (max) -70 dB -70 dB Back Reflection (max) -50 dB -50 dB (2) (max) 0.30 dB 0.30 dB WDL(3) (max) 0.25 dB 0.25 dB (4) (max) 0.05 dB 0.05 dB Repeatability (max) ± 0.02 dB ± 0.02 dB Stability (max) ± 0.02 dB ± 0.02 dB Optical Power (max) 500 mW 500 mW TDL PDL (1) Measured at 1550 nm (2) Time Dependent Loss (3) Wavelength Dependent Loss specified in ± 20nm range (4) Polarization Dependent Loss SEE APPENDIX C FOR SWITCH SCHEMATIC Specifications Relay Type Local Control 6.5” (640x480) LCD Touch Screen GUI I/O Connector Type LC Switching Time (max) 35 ms (excl. software delay) Remote Control Fiber Type 9/125 mm single mode Fault & Error Reporting via Ethernet and LCD (visual) Lifetime (min) 109 cycles Commands/Syntax Dow-Key SCPI commands Dimensions (max) 19” wide full rack Operating System Microsoft Windows 20” Depth Hard drive (min) 3U Height (5.25”) 0 °C to +50 °C -20 °C to +65 °C Power Supply 120 GB SATA HD / removable 120-240 VAC, 50-60 Hz, 250 W (max) Operating Temperature Storage Temperature 3-2 Non-Latching MEMS USB port for keyboard or mouse Ethernet (TCP/IP) Operating Humidity 10-80% non-condensing Fuse Power ON/OFF switch with guard on the front and LED indicators for redundancy Accessible/replaceable on the rear Weight (typ) 30 lbs Cooling / Venting 2 fans / side-to-side Dow-Key Microwave • www.dowkey.com • 800.266.3695 AS9100/ISO-9001: 2008 Certified Fiber Optic 7002 | C-band Crossbar/Fan-Out Features Input/Output Configurations Operating Frequency Manual Control Remote Control 16x16 Matrix utilized as 14x15 crossbar with a 1x2 Fan-Out Segment 1530-1560 nm (C-band) LCD Touch Screen Ethernet Part Number 7002 7002 Application RF Characteristics The 7002 models is a non-blocking 16x16 matrix with MEMS optical switches and splitters and it is configured as a 14x15 crossbar with a 1x2 fan-out switch segment. It switches input-to-output paths in pure optical domain with a operating wavelength of 1530-1565 nm in C-band. The crossbar segment routes any input signal to any output port such that the path between the I/O ports is unique at any given time. Whereas the fan-out segment amplifies output 16 and re-routes it to input 15 & 16 to configure a 1x2 fan-out switch. See appendix C for more details. This model is equipped with a MS Windows based PC, removable SATA hard drive and redundant power supplies with LED monitoring and guarded power switch on the front panel. Locally it can be controlled through an LCD touch screen with Graphical User Interface (GUI) and remotely through Ethernet. Crossbar Segment Fan-Out Segment Insertion Loss (1) (max) 2 dB 5.4 dB Crosstalk (max) -70 dB -70 dB Back Reflection (max) -47 dB -47 dB TDL (2) (max) 0.40 dB 0.55 dB PDL (3) 0.20 dB 0.30 dB Repeatability (max) ± 0.04 dB ± 0.04 dB Optical Power (max) 500 mW 500 mW (max) (1) Measured at 1550 nm (2) Time Dependent Loss (3) Polarization Dependent Loss SEE APPENDIX C FOR SWITCH SCHEMATIC Specifications Relay Type Non-Latching MEMS Local Control 6.5” (640x480) LCD Touch Screen GUI I/O Connector Type FC/APC Switching Time (max) 35 ms (excl. software delay) Remote Control Filter Type 9 mm single mode Fault & Error Reporting via Ethernet and LCD (visual) Lifetime (min) 109 cycles Commands/Syntax Dow-Key SCPI commands Dimensions (max) 19” wide full rack Operating System Microsoft Windows 20” Depth Hard drive (min) 3U Height (5.25”) 0 °C to +50 °C -20 °C to +65 °C Power Supply 120 GB SATA HD / removable 120-240 VAC, 50-60 Hz, 250 W (max) Operating Temperature Storage Temperature USB port for keyboard or mouse Ethernet (TCP/IP) Operating Humidity 10-80% non-condensing Fuse Power ON/OFF switch with guard on the front and LED indicators for redundancy Accessible/replaceable on the rear Weight (typ) 30 lbs Cooling / Venting 2 fans / side-to-side AS9100/ISO-9001: 2008 Certified Dow-Key Microwave • www.dowkey.com • 800.266.3695 3-3 MICROWAVE PRODUCTS GROUP Microwave Products Group (MPG) designs, manufactures and sells special electronic components and systems, including highperformance filters, switches, diplexers, duplexers, Integrated Cosite Equipments (ICE), EMI filters and Low PIM solutions. Our products are used in military, space, telecom infrastructure, medical and industrial applications where function and reliability are crucial. Dow-Key Microwave 4822 McGrath Street, Ventura, CA 93003 USA Tel +1.805.650.0260 Fax +1.805.650.1734 Email [email protected] BSC Filters Ltd. Jorvik House , Outgang Lane, York, YO19 5UP, England Tel +44.1904.438438 Fax +44.1904.438123 Email [email protected] K&L Microwave 2250 Northwood Drive, Salisbury, MD 21801 USA Tel +1.410.749.2424 Fax +1.443.260.2268 Email [email protected] Pole/Zero Corporation 5558 Union Centre Drive, West Chester, OH 45069 USA Tel +1.513.870.9060 Fax +1.513.870.9064 Email [email protected]