Chip LEDs with Reflector 1208<3.0 2.0 t=1.3mm> Medium / High Brightness Type SML-01 ∗ Series Blue Emitting Color Green Material Yellow Orange InGaN on SiC Red AlGaInP on GaAs Package Size(mm) 3020(1208) 3.0×2.0(t=1.3) SML012BC4T SML012BCT SML013BDT SML012EC4T SML012ECT SML-012PT (A) SML-011YT SML-012YT SML-012WT (A) SML-011DT Part No. SML-012DT SML-011UT SML-012UT SML-012VT (A) SML-013UT note) "-" will be taken out for emitting color B/E series. Absolute Maximum Ratings (Ta=25°C) Peak Storage Reverse Operating Power Forward forward Emitting dissipation current voltage temperature temperature current Tstg Topr color VR PD IF IFP∗ (mA) (V) (mW) ( °C) ( ° C) (mA) SML012BC4T SML012BCT SML013BDT SML012EC4T SML012ECT SML-012PT (A) SML-011YT SML-012YT SML-012WT (A) SML-011DT SML-012DT SML-011UT SML-012UT SML-012VT (A) SML-013UT Blue 2.0 1.6 0.5 20 100 25 60 Cathode mark -30 to +85 84 62 -40 to +100 5 Yellow Orange 0.3 84 78 Green 1.3 +0.2 -0.1 3.0 2.3 30 75 2-R0.3 1.7 Part No. :Duty Dimensions (Unit:mm) -40 to +100 100 Terminal Red 1.6 Tolerance:±0.2 -30 to +85 1/10,1kHz. Directivity (Typ.) Electrical Optical Characteristics (Ta=25°C) IF (mA) Max. (µA) VR (V) Typ. (nm) Typ. (nm) 468 26 IF (mA) 100 523 518 565 Transparent Colorless 5 20 590 36 35 − 15 20 − 10 2.0 20∗1 611 17 630 18 639 620∗2 − − 20∗1 Brightness IV 30° Recommended Pad Layout X’ 60° 60° Min. Typ. IF (mcd) (mA) 22 36 36 100 90 250 56 140 140 360 9.0 18 22 63 20 100 36 140 280 22 63 100 36 22 63 100 36 35.5 71 90 220 20∗1 90° 100 50 0 90° 100 50 RELATIVE LUMINOUS INTENSITY (%) SML-01∗ series SML-01∗(A) series Angular Displacement (deg) X Y 0° 30° X’ 30° Y’ 60° 60° 90° 100 50 0 50 90° 100 RELATIVE LUMINOUS INTENSITY (%) Packaging Specifications (Unit:mm) Tape Specifications:T86 <2,500pcs:reel> 1.45 1.6 SML013BDT ( mcd) 2 : Dominant λD light wavelength Reel Specifications 1.5 φ 1.5 +10 3.4 2.4 Tolerance:± 0.2 0 to 0.5 (Unit:mm) The recommended thickness of the screen mask for soldering is between 100 and 150µm. The hole size of the screen mask should be same as the recommended land pattern or smaller. 5.5 1.45 2± 0.05 φ 13 1.75± 0.1 Feeding direction 4± 0.1 φ 180 −30 1:Pulse width : 30ms 30° 8 SML012BC4T SML012BCT SML013BDT SML012EC4T SML012ECT SML-012PT (A) SML-011YT SML-012YT SML-012WT (A) SML-011DT SML-012DT SML-011UT SML-012UT SML-012VT (A) SML-013UT Typ. (V) 3.2 3.3 3.2 3.2 3.3 2.1 Light wavelength Peak Half-wave λp ∆λ 0° Y φ 60 +10 Resin Color Reverse current IR 3.5± 0.05 Part No. Forward voltage VF SML01∗ series Angular Displacement (deg) Y’ X 1.6 Label Position Tolerance:±0.2 11.4±1 Electrical Characteristic Curves Forward Current - Forward Voltage ---- SML012BC4T SML012EC4T SML013BDT SML012BCT SML012ECT 10.0 1.0 2.6 3.0 3.5 FORWARD VOLTAGE : VF (V) ---- SML-011YT SML-012YT SML-012WT(A) SML-011DT SML-012DT SML-011UT SML-012UT SML-012VT(A) ------- SML-012PT(A) Ta=25°C 20.0 10.0 1.0 1.0 3.8 Relative Luminous Intensity - Case Temperature 1.5 2.0 2.5 FORWARD VOLTAGE : VF (V) SML-013UT 3.0 Relative Luminous Intensity - Forward Current ---1.6 IF=20mA RELATIVE LUMINOUS INTENSITY 100.0 FORWARD CURRENT : IF (mA) Ta=25°C 1.4 1.2 SML012BC4T SML012BCT SML012EC4T SML012ECT SML013BDT SML-012PT(A) SML-011YT SML-012YT SML-012WT(A) SML-011DT SML-012DT SML-011UT SML-012UT SML-012VT(A) SML-013UT 1.0 0.8 0.6 0.4 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 CASE TEMPERATURE : Tc (°C) ---- 10.00 SML-012PT(A) Ta=25°C RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF (mA) 100.0 1.00 0.10 0.01 1 10 100 FORWARD CURRENT : (mA) Relative Luminous Intensity - Forward Current RELATIVE LUMINOUS INTENSITY (%) Ta=25°C SML012BC4T SML012BCT SML012EC4T SML012ECT SML013BDT 100 50 10 20 FORWARD CURRENT : IF (mA) SML-011YT SML-012YT SML-012WT(A) SML-011DT SML-012DT SML-011UT SML-012UT SML-012VT(A) SML-013UT ---- SML-011YT SML-012YT SML-012WT(A) SML-011DT SML-012DT SML-011UT SML-012UT SML-012VT(A) SML-013UT ---- SML-011YT SML-012YT SML-011DT SML-012DT SML-011UT SML-012UT Ta=25°C 200 150 100 0 0 ---250 RELATIVE LUMINOUS INTENSITY (%) ---150 50 0 30 0 10 20 30 40 50 60 PEAK FORWARD CURRENT : IF peak (mA) 2.4 1 1 10 100 1000 10000 200Hz 100Hz 500Hz 5 2kHz 1kHz Ta=25°C 20kHz 10kHz SML-012PT(A) 10 5kHz ---- 100Hz 200Hz 500Hz 1kHz 2kHz 5kHz 10kHz 20kHz 5 SML012BC4T SML012BCT SML012EC4T SML012ECT SML013BDT 50kHz Ta=25°C RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. to MAXIMUM TOLERABLE DC CURRENT IF Max. 100Hz 200Hz 1kHz 2kHz 10kHz ---- 50kHz RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. to MAXIMUM TOLERABLE DC CURRENT IF Max. Ratio of Maximum Tolerable Peak Current - Pulse Duration 3.3 1 1 PULSE DURATION : Tw (µs) 10 100 1000 10000 PULSE DURATION : Tw (µs) ---30 ---- 20 SML012BC4T SML012BCT SML012EC4T SML012ECT SML-012PT(A) SML013BDT 10 0 -20 -10 0 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE : Ta (°C) MAXIMUM FORWARD CURRENT : IF Max. (mA) MAXIMUM FORWARD CURRENT : IF Max. (mA) Derating 30 20 SML-012WT(A) SML-012VT(A) SML-013UT 10 0 0 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE : Ta (°C) Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0