12K3S - Series - Dow-Key

Reconfigurable PXI RF Switching Modules
12K3S - Series
DC-26.5 GHz
High Density - Reconfigurable Switching Modules
12K3S-3/D
3 Dual SPDT (High Density Changeover)
12K3S-3/X
3 DPDT ( High Density Transfer)
12K3S-3/3
3 SP3T (High Density 3 Channel Mux)
12K3S-3/6
3 SP6T (High Density 6 Channel Mux)
Description
The 12K3S-Series modules are designed to provide solutions to complex
broadband signal routing and switching applications. Each module uses
non-terminated normally open electromechanical switches that operate with
less than 1 dB insertion loss up to 26.5 Ghz and extended switching life up
to 2 million cycles.
Command and Control
Software
The module occupies 2 slots of a 3U PXI chassis and is composed in one
assembly with up to 3 individual switches (Dual SPDT-Changeover, DPDTTransfer, SP3T or SP6T). Given that all four types of switches use the same
dimensional platform each module can be reconfigured to have SPDT, DPDT,
SP3T, and SP6T on the same module.
The Dow-Key PXI card is supplied with an IVI compliant driver providing
complete functionality for the matrix module. The driver supports the
following Windows platforms: 98/2000/XP.
This reconfigurable platform is well suited for wide selection of switching
applications for inserting and removing components in signal paths. In addition, since only the first left slot in a chassis requires electrical connection, the
unit can also be used in a low cost version with extension slots.
Recommended Software
RF Characteristics
Impedance: Operating Frequency: Switching Speed: Operating Life:
50 Ohms
DC – 26.5 GHz
20 ms (max)
2,000,000 cycles (Cold Switching)
Voltage Standing Wave Ratio (VSWR)
Frequency (GHz)
PXI Interface
The Dow-Key PXI Card complies with the PXI Specification 2.1.
Trigger Bus, Star Trigger, Interrupts, and Local Bus are not implemented.
LabVIEW
LabWindows
Visual Basic
C/C++
Physical
Relay Type: Contact Material:
I/O Connectors: Dimensions: Electromechanical
Beryllium copper, gold-plated
SMA Female
2-slot, 3U, PXI/PCI module
Shock and Vibration
DC-4
4-8
8-12
12-18
18-26.5
1.25:1
1.35:1
1.40:1
1.50:1
1.80:1
Insertion Loss (dB)
Frequency (GHz)
DC-4
4-8
8-12
12-18
18-26.5
0.2
0.3
0.4
0.5
0.8
Open Channel Isolation (dB)
Frequency (GHz)
DC-4
4-8
8-12
12-18
18-26.5
70
65
60
60
50
Operational Shock: Random Vibration:
>> Operating
>> Nonoperating
30 g peak, half-sine, 11 ms pulse
5 to 500 Hz, 0.3 grms
5 to 500 Hz, 2.4 grms
Environment
Operating Temperature:
Storage Temperature:
Relative Humidity:
Operating Altitude:
Storage Altitude:
0 °C to +55 °C
-20 °C to +70 °C
5% to 85% (non-condensing)
5,000 m
15,000 m
RF CW Power (W)
Frequency (GHz)
DC-4
4-8
8-12
12-18
18-26.5
100 W
70 W
60 W
45 W
30 W
Power Consumption Backplane Supply
+12 VDC
+5 VDC
+3.3 VDC
-12 VDC
1A
0.15 A
0.1 A
0A
Integrated Microwave Solutions
4822 McGrath Street, Ventura, CA 93003
Tel: (805) 650-0260 Fax: (805) 650-1734
Visit us at www.dowkey.com
v1.0 11/07
19
Reconfigurable Solutions
Switching Combinations
•
•
Direct Access to 12 internal ports
4x4 RF Matrix
Individual switch contols* :
• 2 SP4T
• 2 SP4T with terminations
• 2 SP4T with terminations + 2 SPDT
• 3 SPDT + DPDT
• DPDT + SPDT with terminations + SPDT
RECONFIGURED FOR 3 SWITCH SOLUTIONS
1 - DPDT (Transfer)
1 - Terminated SPDT
1 - Standard SPDT
* For exact Part Numbers - consult with the Headquarter.
Part Number: 14F3S-1/4x4
4X4 RF Matrix
RECONFIGURED FOR 3 INDEPENDENT SWITCH SOLUTIONS
1- Terminated SP4T with terminations
2 - Standard SP2T
Integrated Microwave Solutions
4822 McGrath Street, Ventura, CA 93003
Tel: (805) 650-0260 Fax: (805) 650-1734
Visit us at www.dowkey.com
* For custom reconfigurations - consult with the Main Office
v1.0 11/07
21