Chip Beads - Multi-layer CTCBF Series GHz Band From 470 Ω to 2700 Ω www.ctparts.com SPECIFICATIONS Part Number Impedance at 100MHz (W ±25%) Impedance at 1.0GHz (W ±40%) DCR Max. (W) Rated Current Max. (mA) CTCB0402F-601G CTCB0402F-102G CTCB0402F-152G CTCB0402F-182G 600 1000 1500 1800 1400 2000 2400 2700 0.85 1.25 1.80 2.20 300 250 230 200 CTCB0603F-471G CTCB0603F-601G CTCB0603F-102G CTCB0603F-152G 470 600 1000 1500 1000 1200 1200 1500 1.0 1.1 1.6 1.7 100 100 50 50 PHYSICAL DIMENSIONS Size A B C D mm (1005) inches (0402) 1.0±0.10 0.50±0.10 0.50±0.10 0.25±0.10 0.04±0.004 0.02±0.004 0.02±0.004 0.01±0.004 Size A B C D mm (1608) 1.6±0.15 inches (0603) 0.063±0.006 0.80±0.15 0.80±0.15 0.30±0.2 0.03±0.006 0.03±0.006 0.012±0.008 Ferrite Not Shown at Actual Size Terminal Electrode CHARACTERISTICS Description: Multi-layer Chip Beads for GHz band general use. Applications: Noise suppression in computer peripherals, telecommunication equipment, data communication equipment and other consumer electronics. Operating Temperature: -55°C to +125°C Testing: Impedance is tested on an HP4287A at the specified frequency. Packaging: Tape & Reel. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. D D C A B PAD LAYOUT Unit: mm 0402 Size 0603 Size 1.8~2.0 1.2~1.4 0.4 0.5 Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2012 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice 0.7~0.8 0.6~0.8 REV 09.20.12