Common Mode Chokes CTCMC0905F Series From 10 µH to 6500 µH www.ctparts.com SPECIFICATIONS Part numbers indicate Inductance tolerance available. N = ±30%, Y = ±50% Test Impedance Z Freq. DCR Inductance Freq. (Ω) Range (Ω) (µH) (KHz) Min. (MHz) Max. Part Number DC Current (A) Max. Rated Voltage (VDC) CTCMC0905F-100N CTCMC0905F-250N CTCMC0905F-400N CTCMC0905F-500N 10 25 40 50 1.0 (0.1V) 1.0 (0.1V) 1.0 (0.1V) 1.0 (0.1V) 200 600 800 1500 20~300 20~150 20~100 20~100 0.08 0.16 0.25 0.32 1.6 1.0 0.9 0.8 50 50 50 50 CTCMC0905F-251Y CTCMC0905F-471Y CTCMC0905F-501Y 250 470 500 100 (5mV) 100 (5mV) 100 (5mV) 600 1000 1000 3~20 2~20 1~20 0.13 0.14 0.15 1.2 1.1 1.0 50 50 50 CTCMC0905F-102Y CTCMC0905F-202Y CTCMC0905F-472Y CTCMC0905F-652Y 1000 2000 4700 6500 100 (5mV) 100 (5mV) 100 (5mV) 100 (5mV) 1500 3000 4000 5000 1~15 1~5 0.3~3 0.3~2 0.31 0.42 0.90 1.05 0.8 0.6 0.4 0.3 50 50 50 50 PHYSICAL DIMENSIONS Size mm inches A B C D E F Ref. Ref. G 9.2±0.3 6.0±0.3 5.0±0.3 2.54±0.3 5.7 1.4 1.0±0.1 0.36±0.012 0.24±0.012 0.20±0.012 0.10±0.012 0.22 0.05 0.04±0.004 Marking: Inductance code A Not Shown at Actual Size F 2 B C CHARACTERISTICS Description: SMD Common Mode Choke. Applications: LANs, telephones, personal computers, CD-ROM drives, electronic games, etc. Operating Temperature: -40°C to +85°C Rated Current: 40°C temperature rise. Inductance Tolerance: ±30%, ±50% Testing: Inductance is tested on an HP4284A or HP4285A at the speficied frequency. Packaging: Tape & Reel. Marking: Parts are marked with inductance code. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. XXX 3 D G 1 4 E PAD LAYOUT Unit: mm 2.0 2.54 1.2 7.5 Circuit Diagram N1 2 3 1 4 N2 Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2013 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 05.14.13