SMD Wire-wound Chip Inductors CT1008LSF Series From 1.0 µH to 15 µH www.ctparts.com SPECIFICATIONS Please specify tolerance code when ordering. CT1008LSF-122_ J = ±5%, K = ±10%, M = ±20% Part Inductance Number (µH) L Test Freq. (MHz) Q Fact. Min. Q Test Freq. (MHz) SRF Typ. (MHz) DCR Max. (W) Rated DC (mA) CT1008LSF-102_ CT1008LSF-122_ CT1008LSF-152_ CT1008LSF-182_ CT1008LSF-222_ CT1008LSF-272_ CT1008LSF-332_ CT1008LSF-392_ CT1008LSF-472_ CT1008LSF-562_ CT1008LSF-682_ CT1008LSF-822_ 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 48 48 41 39 34 34 32 32 31 31 31 23 50 50 50 50 50 50 50 7.9 7.9 7.9 7.9 7.9 230 210 190 170 150 135 120 105 90 80 70 65 0.62 0.68 0.76 0.84 1.10 1.28 1.46 1.56 1.68 1.82 2.00 2.65 700 650 630 600 520 490 450 420 400 380 360 330 CT1008LSF-103_ CT1008LSF-153_ 10 15 7.9 7.9 31 35 7.9 7.9 60 38 2.95 2.40 300 450 PHYSICAL DIMENSIONS Size A Max. mm inches B Max. C Max. D E F G 2.99 2.79 2.2 0.70 1.52 0.51 2.03 0.118 0.110 0.087 0.028 0.060 0.020 0.080 B C overall Not Shown at Actual Size F CHARACTERISTICS Description: SMD ferrite core wire-wound chip inductor. Applications: LC resonant circuits such as oscillator and signal generators, impedance matching, circuit isolation, RF filters, disk drives and computer peripherals, audio and video equipment, TV, radio and telecommunication equipment. Operating Temperature: -25°C to +85°C Inductance Tolerance: ±5%, ±10%, ±20% Testing: Inductance and Q are tested on an HP4286A at specified frequency. Packaging: Tape & Reel, 2,000 parts per reel. Miscellaneous: RoHS Compliant. Marking: Parts are marked with color dots (nH). Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. E A F G terminal D PAD LAYOUT Unit: mm (inch) 2.54 (0.100) 1.02 (0.040) 1.27 (0.050) 1.02 (0.040) Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2012 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 03.09.09