Power Inductors - Shielded CTCDRH6D38F Series From 3.3 µH to 100 µH ENGINEERING KIT #45F www.ctparts.com SPECIFICATIONS Parts are available in ±30% tolerance only. L Test Part Inductance Freq. Number (µH ±30%) (KHz) DCR Max. (mW) Rated DC Current (A) CTCDRH6D38F-3R3N CTCDRH6D38F-5R0N CTCDRH6D38F-6R2N CTCDRH6D38F-7R4N CTCDRH6D38F-8R7N 3.3 5.0 6.2 7.4 8.7 10 10 10 10 10 20 24 27 31 34 3.5 2.9 2.5 2.3 2.2 CTCDRH6D38F-100N CTCDRH6D38F-120N CTCDRH6D38F-150N CTCDRH6D38F-180N CTCDRH6D38F-220N CTCDRH6D38F-270N CTCDRH6D38F-330N CTCDRH6D38F-390N CTCDRH6D38F-470N CTCDRH6D38F-560N CTCDRH6D38F-680N CTCDRH6D38F-820N 10 12 15 18 22 27 33 39 47 56 68 82 10 10 10 10 10 10 10 10 10 10 10 10 38 53 57 92 96 109 124 138 155 202 234 324 2.0 1.7 1.6 1.5 1.3 1.2 1.1 1.0 .95 .85 .75 .70 CTCDRH6D38F-101N 100 10 358 .65 PHYSICAL DIMENSIONS Size A B C D E mm inches F Max. G Max. 6.7±0.3 6.7±0.3 6.5 2.0 6.5 9.5 4.0 0.26±0.01 0.26±0.01 0.255 0.08 0.255 0.37 0.16 Not Shown at Actual Size CHARACTERISTICS Description: SMD (shielded) power inductor. Applications: Power supplies for VTR, OA equipment, LCD televisions, PC notebooks, portable communication equipment, DC/DC converters, etc. Operating Temperature: -30°C to +110°C Inductance Tolerance: ±30% Testing: Tested on a HP4284A at 10KHz , 0.25Vrms , 0Adc. Packaging: Tape & Reel. Marking: Parts are marked with inductance code. Rated DC Current: Indicates the current when the inductance decreases to 65% of its initial value or D.C. current when the temperature of coil is increased by 30% the smaller one is defined as rated current. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. PAD LAYOUT Unit: mm Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2012 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 01.14.05