TH09/2479 TH97/2478 www.eicsemi.com BYV36A - BYV36E IATF 0113686 SGS TH07/1033 VERY FAST SOFT-RECOVERY AVALANCHE RECTIFIER DIODES PRV : 200 - 1000 Volts Io : 1.5 , 1.6 Ampere DO-15 FEATURES : * * * * * * * High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Fast switching for high efficiency Pb / RoHS Free 1.00 (25.4) MIN. 0.142 (3.6) 0.102 (2.6) 0.300 (7.6) 0.230 (5.8) MECHANICAL DATA : 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) * Case : DO-15 Molded plastic * Epoxy : UL94V-0 rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.4 gram Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specifie. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL BYV36A BYV36B BYV36C BYV36D BYV36E UNIT Maximum Repetitive Peak Reverse Voltage VRRM 200 400 600 800 1000 V VR 200 400 600 800 1000 V Minimum Reverse Avalanche Breakdown Voltage @RI = 0.1 mA V(BR)R 300 500 700 900 1100 V Maximum Average Forward Current ( Note 1 ) IF(AV) Maximum Non-Repetitive Peak Forward Current IFSM Maximum Repetitive Peak Forward Current( Ttp = 60 °C ) IFRM 24 21 A VF 1.35 1.45 V VF 1.0 1.05 V Maximum Continuous Reverse Voltage Maximum Forward Voltage at1.0 Amp. ; TJ = 25 °C TJ = 175 °C Maximum Reverse Current VR = VRRMmax VR = VRRMmax ; TJ = 165 °C Maximum Reverse Recovery Time ( Note 2 ) Typical Thermal Resistance - Junction to tie-point 1.6 1.5 30 A A IR 5.0 μA IR(H) 150 μA Trr 100 150 ns Rth j-tp 46 K/W Junction Temperature Range TJ 175 °C Storage Temperature Range TSTG - 65 to + 175 °C Notes : ( 1 ) Ttp = 60 °C , lead length 10 mm. ( 2 ) Measured with IF = 0.5 A, IR = 1.0A, Irr = 0.25A. Page 1 of 2 Rev. 03 : January 14, 2010 TH09/2479 TH97/2478 www.eicsemi.com IATF 0113686 SGS TH07/1033 RATING AND CHARACTERISTIC CURVES ( BYV36A - BYV36E ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 Ω Trr 10 Ω + 0.5 D.U.T. + 0 PULSE GENERATOR ( NOTE 2 ) 50 Vdc (approx) 1Ω - 0.25 OSCILLOSCOPE ( NOTE 1 ) - 1.0 A SET TIME BASE FOR 50-100 ns/cm NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF. 1 2. Rise time = 10 ns max., Source Impedance = 50 ohms. 3. All Resistors = Non-inductive Types. FIG.2 - DERATING CURVE FOR OUTPUT FIG.3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 2.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES RECTIFIED CURRENT BYV36A; B; C 1.6 BYV36D; E 1.2 0.8 10 mm. LEAD LENGTH 0.4 0 8.3 ms SINGLETHALF J = TJmax. SINE WAVE 24 18 12 6.0 0 0 25 50 75 100 125 150 175 1 TIE-POINT TEMPERATURE, ( °C) FORWARD CURRENT, AMPERES 100 TJ = 25 °C 10 BYV36A; B; C BYV36D; E 0.1 REVERSE CURRENT, MICROAMPERES FIG.4 - TYPICAL FORWARD CHARACTERISTICS 1.0 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.5 - TYPICAL REVERSE CHARACTERISTICS 10 TJ = 165 °C 1.0 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 03 : January 14, 2010