www.eicsemi.com RG2Y ULTRA FAST RECOVERY RECTIFIER DIODE PRV : 70 Volts Io : 1.5 Amperes D2A FEATURES : * * * * * * * High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Fast switching for high efficiency Pb / RoHS Free 1.00 (25.4) MIN. 0.161 (4.1) 0.154 (3.9) 0.284 (7.21) 0.268 (6.81) MECHANICAL DATA : 1.00 (25.4) MIN. 0.0402 (1.02) 0.0385 (0.98) * Case : D2A Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.645 gram Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL VALUE UNIT Maximum Peak Reverse Voltage VRM 70 V Maximum Peak Reverse Surge Voltage VRSM 70 V VR 70 V IF(AV) 1.5 A IFSM 50 A Maximum Forward Voltage at IF = 1.5 Amps. VF 1.1 V Maximum Reverse Current at Reverse Voltage Ta = 25 °C IR 0.5 mA Maximum Reverse Current at Reverse Voltage Ta = 100 °C IR(H) 2.5 mA Maximum Reverse Recovery Time ( Note 1 ) Trr 100 ns Junction Temperature Range TJ - 40 to + 150 °C Storage Temperature Range TSTG - 40 to + 150 °C Maximum Reverse Voltage Maximum Average Forward Current Ta = 60 °C Maximum Peak Forward Surge Current ( 50 Hz, Half-cycle, Sine wave, Single Shot ) Notes : ( 1 ) Reverse Recovery Test Conditions : IF = 100 mA, IRP = 100 mA. Page 1 of 2 Rev. 02 : March 25, 2005 www.eicsemi.com RATING AND CHARACTERISTIC CURVES ( RG2Y ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 100µF specimen 100 mA 100 mA IRP IF 10 Ω 20µS 0.1 IRP 200µS Trr NOTE : IF = IRP = 100 mA TO 10 mA FIG.2 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 1.5 1.2 0.9 0.6 0.3 0 40 30 20 10 0 0 25 50 75 100 125 150 175 1 AMBIENT TEMPERATURE, ( °C) 10 FORWARD CURRENT, AMPERES 4 6 10 20 40 60 100 FIG.5 - TYPICAL REVERSE CHARACTERISTICS REVERSE CURRENT, MILLIAMPERES FIG.4 - TYPICAL FORWARD CHARACTERISTICS 1.0 Ta = 25 °C 0.1 2 NUMBER OF CYCLES AT 50Hz 0.01 10 TJ = 100 °C 1.0 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.001 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 25, 2005