GP02-20 ~ GP02-40 MINIATURE HIGH VOLTAGE GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER PRV : 2000 - 4000 Volts Io : 0.25 Ampere DO - 41 FEATURES : * * * * * * * Glass passivated junction High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Pb / RoHS Free 1.00 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) 0.205 (5.2) 0.166 (4.2) MECHANICAL DATA : * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.339 gram 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL GP02-20 GP02-25 GP02-30 GP02-35 GP02-40 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 2000 2500 3000 3500 4000 V Maximum RMS Voltage VRMS 1400 1750 2100 2450 2800 V Maximum DC Blocking Voltage VDC 2000 2500 3000 3500 4000 V Maximum Average Forward Current 0.375"(9.5mm) Lead Length Ta = 55 °C IF(AV) 0.25 A IFSM 15 A VF 3.0 V IR 5.0 µA Peak Forward Surge Current 8.3 ms. Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Forward Voltage at 1.0 A Maximum DC Reverse Current Ta = 25 °C at Rated DC Blocking Voltage Ta = 100 °C IR(H) 50 µA Maximum Reverse Recovery Time ( Note 1 ) Trr 2.0 µs Typical Junction Capacitance ( Note 2 ) CJ 3.0 pf °C/W Junction Temperature Range RθJA TJ 130 - 65 to + 175 °C Storage Temperature Range TSTG - 65 to + 175 °C Typical Thermal Resistance ( Note 3 ) Notes : ( 1 ) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A. ( 2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC ( 3 ) Thermal Resistance from Junction to Ambient at 0.375"(9.5mm) Lead Lengths, P.C. Board Mounted. Page 1 of 2 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( GP02-20 ~ GP02-40 ) PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG. 1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 0.25 0.20 0.15 0.10 0.05 0 0 25 50 75 100 125 150 175 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 15 8.3ms SINGLE HALF SINE-WAVE JEDEC METHOD 12 9 Ta = 55 °C 6 3 0 1 CASE TEMPERATURE, ( °C) 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG. 3 - TYPICAL FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 10 REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES Ta = 100 °C 1.0 Pulse W idth = 300 µs 2% Duty Cycle TJ = 25 °C 0.1 0.01 1.0 0.1 Ta = 25 °C 0.01 0 1 2 4 3 6 5 0 7 FORWARD VOLTAGE, VOLTS 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) JUNCTION CAPACITANCE, (pF) FIG 5 . - TYPICAL JUNCTION CAPACITANCE 6 5 TJ = 25 °C f = 1MHz Vsig = 50MVp-p 4 3 2 1 0 0. 0.2 0.4 1 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 25, 2005