Altech Panel Mount Terminal Blocks

Mini Screw Clamp Design
For applications with space restraints,
Altech offers a mini panel mount and mini
15mm DIN Rail Mount solution. In order to
provide a vibration resistant wire termination, both styles come equipped with the
most reliable rising cage clamp design
where both the clamping yoke and current
bar are serrated to maximize gripping
force.
• CMB4 Panel mount Series, are modular blocks that snap together to form
an assembly. The End Plates have
counter bored mounting holes which
allow you to use M3 screws to mount
the assembly directly to your panel.
• CMT4 DIN Rail Mountable Series
snap onto our compact 15mm DIN Rail
(Part # CA601/S). CGMT4 grounding
blocks are available as well as our new
CF4U and CF4U(L) fuse blocks, which
are also 15mm DIN rail mountable.
Mini Spring Clamp Design
If a mini screwless panel mount assembly
is required we can offer our CSCP2.5
series. Like our CMB4 Series, the CSCP2.5
series are modular blocks that snap
together to form an assembly. For mounting purposes, the End Plates are equipped
with mounting ears which allows you to
mount the assembly directly to your panel.
Busbar (Neutral/Earth Clamps)
MINI RAIL &
PANEL MOUNT
T E R M I N A L
68
Our CENC series with (10x3mm) or
(6x6mm) Busbar, is a flexible solution for
terminating neutral and grounding wires to
a busbar. This assembly can be panel
mounted by using our NES busbar mounting blocks or can be DIN rail mountable by
utilizing our CA202 End Stops.
High Temperature
Ceramic EuroBlocks
Our CB Series ceramic terminal blocks are
offered with or without mounting holes for
either panel mount or free floating applications. These blocks are designed to
withstand extremely high temperatures
(-40° to 600°C)
B L O C K S
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
Mini Feed-Through Panel Mount
CMB4
For use when space constraints
require extremely compact
solutions and internal jumping
is required.
Individual components can be
used to build your own assemblies. Just snap the required
number of terminal block components together and place a
Mounting Section on each end.
The CMB4 accepts internal
jumpers and standard marking
tags.
EPCMB4
Terminal Width
6 mm
Height x Length
28 x 27 mm
Stripping Length
9 mm
Insulation Material
Polyamide 6.6
Type of Connection
2 screw clamps & 1 tapped hole for cross connect.
Preassembled blocks are
also available for quick
and easy installations.
See Dimensions below.
• Extremely compact and
cost effective
• High density
• Screw-cage clamp
• Internal jumping provision
• Polyamide 6.6
• Standard color: gray
Approvals
60947-7-1
E220514
22-10 AWG
0.2-4 sq.mm
22-10 AWG
Voltage Rating
300 V
500 V
300 V
Current Rating
35 A
32 A
30 A
7 lb-in
0.5 Nm
7 lb-in
Wire Range
Torque
Dimensions mm (in.)
CMB4
Other Approvals
Cat. No.
Std. Pk.
Terminal Block
CMB4
100
Mounting Section
EPCMB4
50
Separator Plate
SPCMB4
100
Mounting Screw*
Any length M3 screw may be used.
Internal
Jumper**
2 pole
3 pole
4 pole
10 pole
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
Insulated
Internal
Jumper**
2 pole
3 pole
4 pole
10 pole
CA747/2
CA747/3
CA747/4
CA747/10
100
100
100
10
CA703/1
CA704/1
CA705/1
CA732/10
CA732/10-A
CA732/100
100
100
100
100
100
10
CA607/S/Q
100
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
MT2
100
Current
Bars
COLOR BLOCKS
(other than standard grey)
2 pole
3 pole
4 pole
10 pole
10 pole (breakable)
100 pole
When ordering please add
color suffix to Cat. No.
Shorting Sleeve & Screw**
Example for color Red: Cat.No./R
External
Jumper
Color
Red
Yellow
Blue
Green
Ordering Suffix
R
Y
BU
G
Consult Altech for availability:
Orange
O
Beige
BG
Dark Brown DB
Black
BL
White
W
b
a
2 pole
3 pole
4 pole
10 pole
Marking Tags
* Any length M3 screw may be used.
** Torque recommendation is 3.5 lb-in.
No. of
Cat No. Poles
CMB4/2
2
CMB4/3
3
CMB4/4
4
CMB4/5
5
CMB4/6
6
CMB4/7
7
CMB4/8
8
CMB4/9
9
CMB4/10 10
CMB4/11 11
CMB4/12 12
CMB4/13 13
CMB4/14 14
CMB4/15 15
CMB4/16 16
CMB4/17 17
CMB4/18 18
CMB4/19 19
CMB4/20 20
CMB4/21 21
CMB4/22 22
CMB4/23 23
CMB4/24 24
Hole
Width (a) Spacing (b)
26 (1.02)
19 (0.75)
32 (1.26)
25 (0.98)
38 (1.50)
31 (1.22)
44 (1.73)
37 (1.46)
50 (1.97)
43 (1.69)
56 (2.20)
49 (1.93)
62 (2.44)
55 (2.17)
68 (2.68)
61 (2.40)
74 (2.91)
67 (2.64)
80 (3.15)
73 (2.87)
86 (3.39)
79 (3.11)
92 (3.62)
85 (3.35)
98 (3.86)
91 (3.58)
104 (4.09)
97 (3.82)
110 (4.33) 103 (4.06)
116 (4.57) 109 (4.29)
122 (4.80) 115 (4.53)
128 (5.04) 121 (4.76)
134 (5.28) 127 (5.00)
140 (5.51) 133 (5.24)
146 (5.75) 139 (5.47)
152 (5.98) 145 (5.71)
158 (6.22) 151 (5.94)
Mounting Section
EPCMB4
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
69
Mini Feed-Through 15mm
CMT4
For wire-to-wire connecting in
control, automation, instrumentation and power distribution
applications.
CGMT4
Altech “miniature” terminal
blocks offer tremendous space
advantage as demanded by certain wiring configurations.
Terminal Width
6 mm
6 mm
Height x Length
29 x 27 mm
28.5 x 27 mm
Stripping Length
9 mm
9 mm
Insulation Material
Polyamide 6.6
Polyamide 6.6
Type of Connection
2 screw clamps & 1 tapped hole
for cross connection
2 screw clamps
Approvals
60947-7-1
E220514
60947-7-1
22-10 AWG
0.2-4 sq.mm
22-10 AWG
22-10 AWG 0.2-4 sq.mm 22-10 AWG
Voltage Rating
300 V
500 V
300 V
400 V
Current Rating
35 A
32 A
35 A
32 A
7 lb-in
0.5 Nm
7 lb-in
Wire Range
Torque
7 lb-in
E220514
0.5 Nm
7 lb-in
Other Approvals
AEx eII
Ex eII U
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Terminal Block
CMT4
100
CGMT4
50
End Plate
EPCMT4
50
Isolation Partition
PPCMT4
50
CA602
100
MT2
100
DIN Rail
for ordering information
refer to pages 90-91
End Stop
for ordering information
refer to page 92
COLOR BLOCKS
(other than standard grey)
When ordering please add
color suffix to Cat. No.
Example for color Red: Cat.No./R
Color
Red
Yellow
Blue
Green
Ordering Suffix
R
Y
BU
G
Consult Altech for availability:
Orange
O
Beige
BG
Dark Brown DB
Black
BL
White
W
70
Internal
Jumper
2 pole
3 pole
4 pole
10 pole
CA727/2
CA727/3
CA727/4
CA727/10
100
100
100
10
Insulated
Internal
Jumper
2 pole
3 pole
4 pole
10 pole
CA747/2
CA747/3
CA747/4
CA747/10
100
100
100
10
CA703/1
CA704/1
CA705/1
CA732/10
CA732/10-A
CA732/100
100
100
100
100
100
10
CA607/S/Q
100
CA714/2
CA714/3
CA714/4
CA714/10
100
100
100
20
MT2
100
Current
Bars
2 pole
3 pole
4 pole
10 pole
10 pole (breakable)
100 pole
Shorting Sleeve & Screw
External
Jumper
Marking Tags
2 pole
3 pole
4 pole
10 pole
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
Fuse Block, 5 x 20 and 5 x 25 mm
CF4U†
Certain electrical and control systems require protection by fuses.
The terminal has a hinged carrier
that has a specially designed
space for a cartridge type glass
fuse of size Ø5 x 20 or Ø5 x 25
mm. The fuse can be engaged or
disengaged by the movement of
the carrier.
NEW
Terminal Width
Type of Connection
*Add required voltage to
part number as a suffix. i.e.
CF4U(L)/6-60 for 6-60 V
AC/DC.
NEW
No Polarity Required.
Altech fuse terminals are also
available with light indication - Height x Length
CF4U(L). A specially designed Stripping Length
built-in circuit gives light indication in the event of fuse blow out. Insulation Material
No polarity is required.
† Fuses are sold separately
Altech, see pages 100-101
CF4U(L)†*
8 mm
8 mm
57.6 x 57 mm
57.6 x 57 mm
9.5 mm
9.5 mm
Polyamide 6.6
Polyamide 6.6
4 screw clamps
4 screw clamps
CF4U(L)/6-60
CF4U(L)/90-240
6-60 V AC/DC
90-240 V AC/DC
LED Voltage
Type of Fuse Used
Ø5x20, Ø5x25 mm
Ø5x20, Ø5x25 mm
Approvals
60947-7-3
22-10 AWG 0.2-4 mm2
Wire Range
E220514
E220514
60947-7-3
22-10 AWG
22-10 AWG
0.2-4 mm2
22-10 AWG
Voltage Rating
600 V
1000 V
600 V
600 V
600 V
600 V
Current Rating
10 A
6.3 A
10 A
10 A
6.3 A
10 A
7 lb-in
7 lb-in
0.5 Nm
7 lb-in
Cat. No.
Std. Pk.
Torque
7 lb-in
0.5 Nm
Cat. No.
Std. Pk.
Other Approvals
Terminal Block
CF4U
100
CF4U(L)*
CA702
CA802
50
50
CA702
CA802
50
DIN Rail
for ordering information
refer to pages 90-91
End Stop
for ordering information
refer to page 92
Internal
Jumper
COLOR BLOCKS
(other than standard grey)
When ordering please add
color suffix to Cat. No.
Example for color Red: Cat.No./R
Color
Red
Yellow
Blue
Green
Ordering Suffix
R
Y
BU
G
Consult Altech for availability:
Orange
O
Beige
BG
Dark Brown DB
Black
BL
White
W
CF4U(L) Only
2 pole
3 pole
4 pole
10 pole
Insulated
Internal
Jumper
2 pole
3 pole
4 pole
10 pole
Current
Bar
2 pole
3 pole
4 pole
10 pole
27KΩ
27KΩ
LED Circuit for offline
indication in CF4U(L)/6-60V
200KΩ
200KΩ
LED Circuit for offline
indication in CF4U(L)/90-240V
Shorting Sleeve & Screw
External
Jumper
50
50
2 pole
3 pole
4 pole
10 pole
Marking Tags (on terminal)
(on Lever)
CA711/2
CA711/3
CA711/4
CA711/10
100
50
50
20
CA711/2
CA711/3
CA711/4
CA711/10
100
50
50
20
MT8
MT8
100
100
MT8
MT8
100
100
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
71
Spring Clamp Panel Mount
CSCP2.5T
Altech “screwless” spring
clamp panel mount terminal blocks are an excellent
solution for extremely
compact wiring applications.
These terminal blocks are
“add-on” type and can be
combined to form multipole
assemblies. The
stacked assembly is fitted
with mounting end sections on both ends for
easy installation on to the
panel.
CSCP2.5T2
Terminal Width
5 mm
10 mm
Height x Length
27 x 35 mm
27 x 35 mm
Stripping Length
11 mm
11 mm
The terminal has marker
holding recessess on three
sides to accept marking
tags. Cross connection can
be achieved with the aid of
insulated jumpers.
Insulation Material
Polyamide 6.6
Polyamide 6.6
Type of Connection
2 spring clamp connections
4 spring clamp connections
The CSCP2.5T2 panel
mount terminal blocks
have
two
connection
points on each side all with
the same potential. The terminals provide possibility
of further multiplication
through jumpering.
Voltage Rating
600 V
800 V
600 V
600 V
800 V
600 V
Current Rating
20 A
24 A
20 A
20 A
24 A
20 A
Approvals
E220514
60947-7-1
Wire Range
22-14 AWG
0.2-2.5 sq.mm 22-14 AWG
E220514
60947-7-1
22-14 AWG
0.2-2.5 sq.mm 22-14 AWG
Other Approvals
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Terminal Block
CSCP2.5T
100
CSCP2.5T2
100
End Section
(set of left and right)
EPCSCP2.5T
25
EPCSCP2.5T
25
Insulated Jumper
(2 pole)
CA803/1
100
CA803/1
100
Marking Tags
MT4
100
MT3
100
Operating Tool
SCA2-5
1
SCA2-5
1
Operating Tool
for use with
CSCP2.5T2
COLOR BLOCKS
(other than standard grey)
EPCSCP2.5T
When ordering please add
color suffix to Cat. No.
CSCP2.5T2
EPCSCP2.5T
Example for color Red: Cat.No./R
Color
Red
Yellow
Blue
Green
Ordering Suffix
R
Y
BU
G
Consult Altech for availability:
Orange
O
Beige
BG
Dark Brown DB
Black
BL
White
W
72
CSCP2.5T
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
Busbar
CENC4
A quick reliable solution for
ground, neutral or low voltage distribution applications. The Busbar System
consists of a busbar, busbar
supports, and screw clamp
terminals for terminating
wires.
NEB 10 (10 x 3 mm) and
NEB 6 (6 x 6 mm), tin plated
copper busbars are available in one meter lengths.
Both have a 140A current
carrying capacity.
NES plastic support with
fixing screws for holding 10
x 3 & 6 x 6 busbar makes
placing of busbar an easy
task. Busbars up to 200 mm
length should be supported
at ends by two busbar supports. For busbars exceeding 200 mm length, it is recommended to provide intermediate busbar support.
Easy to operate CENC
clamp secures wire to the
busbar.
CENC16
CENC35
Terminal Width
7.5 mm
9.8 mm
14.5 mm
Height x Length
30 x 23.3 mm
36 x 23.3 mm
45 x 27.3 mm
Stripping Length
12 mm
16 mm
16 mm
Insulation Material
Polyamide 6.6
Polyamide 6.6
Polyamide 6.6
Type of Connection
1 screw clamp connection
1 screw clamp connection
1 screw clamp connection
Approvals
60947-7-1
E220514
60947-7-1
E220514
60947-7-1
E220514
22-10 AWG 0.2-6 sq.mm 22-12 AWG 10-4 AWG 6-16 sq.mm 10-6 AWG 8-2 AWG 10-35 sq.mm 8-2 AWG
Wire Range
Current Rating*
41 A
14 lb-in
Torque
0.8 Nm
76 A
14 lb-in
14 lb-in
2.0 Nm
125 A
17.5 lb-in 25 lb-in
2.5 Nm
25 lb-in
Other Approvals
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Terminal Block**
CENC4
Busbar
(10 x 3 mm)
NEB10
1m
NEB10
1m
NEB10
1m
Busbar
(6 x 6 mm)
NEB6
1m
NEB6
1m
NEB6
1m
Plastic Support
with Fixing Screw
NES
50
NES
50
NES
50
End Clamp/Bus bar
support for rail mounting
CA202
50
CA202
50
CA202
50
Marking Tags
MT5
100
MT6
100
MT6
100
50
CENC16
50
CENC35
50
NES
for panel mount
applications
CA202
* 140A current carrying capacity of busbar should be taken
into account while connecting loads.
** Consult for other available colors.
for DIN rail
applications
Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
73
High Temperature Ceramic EuroBlocks™
Suitable for use in high temperature applications up to
600°C (1112°F). Applications
include hot melt glue guns,
furnaces, heaters, process
equipment and machinery.
Terminal blocks are offered
with mounting holes for panel
mounting or free floating
applications.
•
•
•
•
Compact, space saving
Tubular screw clamp
Free float or panel mount
Temperature range:
-40°C (-40°F) to
600°C (1112°F)
• Standard color: white
• Material
Housing: Steatite
Clamp:
Brass
Screws: Zinc plated steel
h
Ceramic
Ceramic
Ceramic
*
E220514
60947-7-1
300V
300V
800 V
300V
300V
800 V
300V
Current Rating
30 A
24 A
20 A
40 A
32 A
30 A
76 A
57 A
65 A
Torque
6 lb-in. 0.4 Nm 6 lb-in.
b
12 lb-in. 1.2 Nm 12 lb-in.
Cat. No.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
CB4/1
CB4/2
CB4/2H
CB4/3
CB4/3H
–
50
50
50
50
50
–
CB6/1
50
CB6/2H
50
CB16/2H
50
CB6/3H
CB6/4H*
50
50
CB16/3H
–
50
–
Design E
w
w
P
P
d1
h
d2
P
d1
h
d1
d1
h
h
a
a
a
d2
a
Stripping
Length
Std. Pk.
Design F
b
w
P
20-6 AWG .5-2.5mm2 18-6 AWG
6 lb-in. 0.5 Nm 6 lb-in.
Design D
Design C
No. of
Poles
d2
P
a
b
w
h
d1
d2
Recommended
Mounting Screw
CB4/1
A
1
6
11
-
-
23
18.5
-
-
-
CB4/2
B
2
6
18
7.3
-
23
18.5
-
-
-
CB4/2H
C
2
6
24
13
14.6
23
18.5
6
3.5
M3 x 16
CB4/3
D
3
6
25
7.3
-
23
18.5
-
-
-
CB4/3H
E
3
6
36
13
13
23
18.5
6
3.5
M3 x 16
CB6/1
A
1
6
12
-
-
25.5
19.5
-
-
-
C
2
6
26
15
12.6
25.5
19.5
6
3.5
M3 x 16
CB6/2H
CB6/3H
E
3
6
41
15
15
25.5
19.5
6
3.5
M3 x 16
CB16/2H
C
2
8.5
31
17
16.5
28
23.2
6
3.5
M3 x 20
CB16/3H
E
3
8.5
48
17
17
28
23.2
6
3.5
M3 x 20
CB6/4H
F
4
6
39
8
–
20
16
6
3.5
M3 x 16
*UL Recognition in progress for CB6/4H
Note: All dimensions are shown in mm, to convert to inches please divide by 25.4.
Altech Corp. • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
®
E220514
800 V
P
22-10 AWG .5-4mm2 22-10 AWG
60947-7-1
300V
w
Design
Type
E220514
Voltage Rating
a
74
Available in 2-3 poles.
24-12 AWG .5-2.5mm2 24-12 AWG
Design B
h
Type
Cat. No.
Available in 1-4 poles.
Wire Range
NEW
P
Available in 1-3 poles.
60947-7-1
1 (free floating)
2 (free floating)
2 (with mounting holes)
3 (free floating)
3 (with mounting holes)
4 (with mounting hole)
w
CB16
Approvals
No. of Poles
w
CB6
Insulation Material
New CB6/4H*
Design A
CB4