Safety magnetic controller According to VDE 0660 Part 209 BIA-certified System type 4 consists of magnetic monitoring system (1) coded magnet (2) coded magnetic switch (3) (1) (2) (3) Model description Part number Max. connectable sensor units Normally-open contact Combined normally-open/normally-closed contact Changeover contact MÜZ-102/24 639.2701.006 1 l – – TK-42-CD 640.2042.015 – – – – MAK-4237-3 649.0742.008 – – l – Operating voltage AC 230 V AC 24 V DC 24 V Input current – l – 0.1 A – – – – – – – – AC . 250 V 8A 1500 VA –/l l/– – – – – – DC 30 V – 250 mW – – 0 °C/+55 °C 32 °F/+131 °F IP 20 E PA 6.6 TS 35 (DIN 50022) max. 2.5 mm2/– 260/1 – – –20 °C/+70 °C –4 °F/+158 °F IP 67 – PA 6.6 M4 – – – – –20 °C/+70 °C –4 °F/+158 °F IP 67 – PA 6.6 M4 –/4 x 0.25 mm2 – 3 mm 14 mm Approvals BIA/SUVA BIA/SUVA BIA/SUVA Stock status: Ex stock/Built to order l/– l/– l/– Switching capacity. safety contact Switching voltage Switching current Switching capacity LED: Status of hazard/switching status Relay: forced disconnection/standard Ambient conditions Temperature range max. max. max. min./max. Protection type (according to DIN 40050) Humidity class (according to DIN 40040) Housing material Attachment option Connection type: terminal block/cable Connection diagram (page/pos.) Sensing distance S on S off min. max. All dimensions in mm All sensor units refer to the standard cable length of 3 m (1) 252 (2) (3) (2) (3) MÜZ-102/24-UM 639.2701.010 1 – – l TK-42-CD 640.2042.015 – – – – MAK-4237-3 649.0742.008 – – l – – l – 0.1 A – – – – – – – – AC 250 V 8A 1500 VA –/l l/– – – – – – DC 30 V – 250 mW – – 0 °C/+55 °C 32 °F/+131 °F IP 20 E PA 6.6 TS 35 (DIN 50022) max. 2.5 mm2/– 260/2 – – –20 °C/+70 °C –4 °F/+158 °F IP 67 – PA 6.6 M4 – – – – –20 °C/+70 °C –4 °F/+158 °F IP 67 – PA 6.6 M4 –/4 x 0.25 mm2 – 3 mm 14 mm BIA/SUVA BIA/SUVA BIA/SUVA l/– l/– l/– (1) (2) Sensors (1) (3) 253