SMD Transient Voltage Suppressor TV04A5V0-HF Thru. TV04A441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 400 Watts RoHS Device Halogen Free SMA/DO-214AC Features - Glass passivated chip. - 400W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle):0.01% 0.179(4.55) 0.161(4.10) - Low leakage. 0.064(1.63) 0.048(1.23) - Uni and Bidirectional unit. - Excellent clamping capability. 0.109(2.76) 0.099(2.51) - Very fast response time. - UL recognized file # E349157 - Range: TV04A5V0J(B) thru. TV04A240J(B) R 0.206(5.22) 0.192(4.87) 0.012(0.30) 0.006(0.15) 0.089(2.26) 0.077(1.96) Mechanical data - Epoxy: UL 94V-0 rate flame retardant. 0.008(0.20) 0.000(0.00) 0.059(1.51) 0.030(0.75) - Case: SMA/DO-214AC, molded plastic. - Terminals: solderable per MIL-STD-750, method 2026. - Polarity: Color band denotes cathode end execpt bipolar. - Weight: 0.069 gram (approx.) Dimensions in inches and (millimeter) Maximum Ratings and Electrical Characteristics O Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Value Units Peak power dissipation on 10/1000μS waveform (Note1) PPP 400 W Peak pulse current on 10/1000μS waveform (Note 1) IPP See Next Table A Steady state power dissipation at TL=75°C PD 1.0 W Peak forward surge current, 8.3mS single half sine-wave unidirectional only (Note 2) IFSM 40 A Maximum instantaneous forward voltage at 25.0A for unidirectional only (Note 3) VF 3.5/5.0 V TJ, TSTG -55 to +150 °C Characteristics Operating junction and storage temperature Notes: 1. Non-repetitive current pulse, per Fig. 5 and derated above TA=25°C, per Fig. 1. 2. Measured on 8.3mS single half sine-wave or equare wave,duty cycle=4 pulses per minute maximum. 3. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V Company reserves the right to improve product design , functions and reliability without notice. REV:F Page 1 QW-JTV01 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor RATING AND CHARACTERISTIC CURVES (TV04A5V0-HF thru TV04A441-HF) Fig.1 - Pulse Derating Curve Fig.2 - Maximum Non-Repetitive Surge Current 50 Peak Forward Surge Current, (A) Peak Pulse Derating in Percentage of Peak Power or Current, (%) 100 80 60 40 20 0 40 30 20 10 0 0 25 50 75 100 125 150 175 200 1 10 100 Ambient Temperature, TA (°C) Number of Cycles at 60Hz Fig.3 - Steady State Power Derating Curve Fig.4 - Peak Pulse Power Rating Curve 1.0 100 0.8 Peak Power, (kW) Steady Power Dissipation, (W) 8.3mS single half sine-wave (JEDEC method) TJ=TJ , max. 0.6 0.4 10 1.0 0.2 0.1 0.1 0.0 0 25 50 75 100 125 150 175 1 10 100 1000 10000 Lead Temperature, TL (°C) Pulse Width, td (μs) Fig.5 - Pulse Waveforem Fig.6 - Typical Junction Capacitance Peak Pulse Current, (%) 100 Peak value (Ipp) TJ = 25°C Pluse width(td) is defined as the point where the peak current decays to 50% of Ipp Ipp Half Value= 2 50 10 / 1000μsec. waveform as defined by R.E.A. td Junction Capacitance, CJ (pF) 10000 Tr=10μs Bi-directional @zero bias 1000 Uni-directional @zero bias 100 Uni-directional @VRWM 10 Bi-directional @ VRWM TJ=25°C f=1.0MHz 1 0 0 1.0 2.0 3.0 4.0 1 Time, (ms) 10 100 1000 Reverse Breakdown Voltage, VBR (V) Company reserves the right to improve product design , functions and reliability without notice. REV:F Page 2 QW-JTV01 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Electrical Characteristics (TV04A5V0-HF Thru. TV04A441-HF) Breakdown voltage VBR @ IT Part No. Min. (V) Max. (V) IT (mA) Maximum Reverse Leakage @VRWM Working Peak Reverse Voltage Maximum Reverse Surge Current Maximum Clamping Voltage @IPP IR (uA) VRWM (V) IPP (A) VC (V) UNI BI Device Marking Code TV04A5V0J(B)-HF 6.40 7.00 10 800 5.0 43.48 9.2 AE WE TV04A6V0J(B)-HF 6.67 7.37 10 800 6.0 38.83 10.3 AG WG TV04A6V5J(B)-HF 7.22 7.98 10 500 6.5 35.71 11.2 AK WK TV04A7V0J(B)-HF 7.78 8.60 10 200 7.0 33.33 12.0 AM WM TV04A7V5J(B)-HF 8.33 9.21 1 100 7.5 31.01 12.9 AP WP TV04A8V0J(B)-HF 8.89 9.83 1 50 8.0 29.41 13.6 AR WR TV04A8V5J(B)-HF 9.44 10.40 1 10 8.5 27.78 14.4 AT WT TV04A9V0J(B)-HF 10.00 11.10 1 5 9.0 25.97 15.4 AV WV TV04A100J(B)-HF 11.10 12.30 1 5 10.0 23.53 17.0 AX WX TV04A110J(B)-HF 12.20 13.50 1 1 11.0 21.98 18.2 AZ WZ TV04A120J(B)-HF 13.30 14.70 1 1 12.0 20.10 19.9 BE XE TV04A130J(B)-HF 14.40 15.90 1 1 13.0 18.60 21.5 BG XG TV04A140J(B)-HF 15.60 17.20 1 1 14.0 17.24 23.2 BK XK TV04A150J(B)-HF 16.70 18.50 1 1 15.0 16.39 24.4 BM XM TV04A160J(B)-HF 17.80 19.70 1 1 16.0 15.38 26.0 BP XP TV04A170J(B)-HF 18.90 20.90 1 1 17.0 14.49 27.6 BR XR TV04A180J(B)-HF 20.00 22.10 1 1 18.0 13.70 29.2 BT XT TV04A190J(B)-HF 21.10 23.30 1 1 19.0 13.00 30.8 BB XB TV04A200J(B)-HF 22.20 24.50 1 1 20.0 12.35 32.4 BV XV TV04A220J(B)-HF 24.40 26.90 1 1 22.0 11.27 35.5 BX XX TV04A240J(B)-HF 26.70 29.50 1 1 24.0 10.28 38.9 BZ XZ TV04A260J(B)-HF 28.90 31.90 1 1 26.0 9.50 42.1 CE YE TV04A280J(B)-HF 31.10 34.40 1 1 28.0 8.81 45.4 CG YG TV04A300J(B)-HF 33.30 36.80 1 1 30.0 8.26 48.4 CK YK TV04A330J(B)-HF 36.70 40.60 1 1 33.0 7.50 53.3 CM YM TV04A360J(B)-HF 40.00 44.20 1 1 36.0 6.88 58.1 CP YP TV04A400J(B)-HF 44.40 49.10 1 1 40.0 6.20 64.5 CR YR TV04A430J(B)-HF 47.80 52.80 1 1 43.0 5.76 69.4 CT YT TV04A450J(B)-HF 50.00 55.30 1 1 45.0 5.50 72.7 CV YV TV04A480J(B)-HF 53.30 58.90 1 1 48.0 5.17 77.4 CX YX TV04A510J(B)-HF 56.70 62.70 1 1 51.0 4.85 82.4 CZ YZ TV04A540J(B)-HF 60.00 66.30 1 1 54.0 4.59 87.1 RE ZE TV04A580J(B)-HF 64.40 71.20 1 1 58.0 4.27 93.6 RG ZG TV04A600J(B)-HF 66.70 73.70 1 1 60.0 4.13 96.8 RK ZK TV04A640J(B)-HF 71.10 78.60 1 1 64.0 3.88 103.0 RM ZM TV04A700J(B)-HF 77.80 86.00 1 1 70.0 3.54 113.0 RP ZP TV04A750J(B)-HF 83.30 92.10 1 1 75.0 3.31 121.0 RR ZR TV04A780J(B)-HF 86.70 95.80 1 1 78.0 3.17 126.0 RT ZT TV04A800J(B)-HF 88.80 97.60 1 1 80.0 3.09 129.6 RB ZB TV04A850J(B)-HF 94.40 104.00 1 1 85.0 2.92 137.0 RV ZV Company reserves the right to improve product design , functions and reliability without notice. REV:F Page 3 QW-JTV01 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Electrical Characteristics (TV04A5V0-HF Thru. TV04A441-HF) Breakdown voltage VBR @ IT Part No. Maximum Reverse Leakage @VRWM Working Peak Reverse Voltage Maximum Reverse Surge Current Maximum Clamping Voltage @IPP IR (uA) VRWM (V) IPP (A) VC (V) UNI BI Device Marking Code Min. (V) Max. (V) IT (mA) TV04A900J(B)-HF 100.0 111.0 1 1 90.0 2.74 146.0 RX ZX TV04A101J(B)-HF 111.0 123.0 1 1 100.0 2.47 162.0 RZ ZZ TV04A111J(B)-HF 122.0 135.0 1 1 110.0 2.26 177.0 SE VE TV04A121J(B)-HF 133.0 147.0 1 1 120.0 2.07 193.0 SG VG TV04A131J(B)-HF 144.0 159.0 1 1 130.0 1.91 209.0 SK VK TV04A141J(B)-HF 155.0 171.0 1 1 140.0 1.76 226.8 SB VB TV04A151J(B)-HF 167.0 185.0 1 1 150.0 1.65 243.0 SM VM TV04A161J(B)-HF 178.0 197.0 1 1 160.0 1.54 259.0 SP VP TV04A171J(B)-HF 189.0 209.0 1 1 170.0 1.45 275.0 SR VR TV04A181J(B)-HF 200.0 220.0 1 1 180.0 1.37 291.6 ST VT TV04A191J(B)-HF 211.0 232.0 1 1 190.0 1.30 307.8 SV VV TV04A201J(B)-HF 224.0 247.0 1 1 200.0 1.23 324.0 SW VW TV04A221J(B)-HF 246.0 272.0 1 1 220.0 1.12 356.0 SX VX TV04A251J(B)-HF 279.0 309.0 1 1 250.0 0.99 405.0 SZ VZ TV04A301J(B)-HF 335.0 371.0 1 1 300.0 0.82 486.0 DE HE TV04A351J(B)-HF 391.0 432.0 1 1 350.0 0.71 567.0 DG HG TV04A401J(B)-HF 447.0 494.0 1 1 400.0 0.62 648.0 DK HK TV04A441J(B)-HF 492.0 543.0 1 1 440.0 0.56 713.0 DM HM Note: 1) Suffix J denotes 5% tolerance devices. 2) Suffix B after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double. Company reserves the right to improve product design , functions and reliability without notice. REV:F Page 4 QW-JTV01 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Reel Taping Specification d P0 P1 T E Index hole F W B P C A 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... 10 pitches (min) ....... ....... Start 10 pitches (min) Direction of Feed SMA/DO-214AC SMA/DO-214AC SYMBOL A B C d D D1 D2 (mm) 2.79 ± 0.10 5.33 ± 0.10 4.50 (max) 1.75 ± 0.10 330MAX 50.0 MIN. 13.0 ± 0.2 (inch) 0.110 ± 0.004 0.210 ± 0.004 0.177 (max) 0.069 ± 0.004 13.00MAX 1.969 MIN. 0.512 ± 0.008 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 12.0 ± 0.30 18.4 MAX. (inch) 0.069 ± 0.004 0.216 ± 0.002 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.472 ± 0.012 0.724 MAX Company reserves the right to improve product design , functions and reliability without notice. REV:F Page 5 QW-JTV01 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Marking Code 2 1 1. C: COMCHIP 2. ○: Package C PKG A SMA B SMB C SMC 4 XX 3 3. XX: Marking code (see Page. 3~4) :Cathod Band 4. Suggested PAD Layout A DO-214AC(SMA) SIZE (mm) (inch) A 5.28 0.208 B 1.88 MAX 0.074 MAX C 1.52 MIN 0.060 MIN D 1.68 MIN 0.066 MIN B D C Standard Packaging REEL PACK Case Type SMA/DO-214AC REEL Reel Size ( pcs ) (inch) 5,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV:F Page 6 QW-JTV01 Comchip Technology CO., LTD.