SMD Transient Voltage Suppressor TV02W5V0-G Thru TV02W191-G Working Peak Reverse Voltage:5.0-190Volts Peak Pulse Power:200Watts RoHS Device Features SOD-123 -Glass passivated chip. -Low leakage current. -200W peak pulse power capility with a 10/1000us waveform,repetitive rate (duty cycle):0.01%. 0.112 (2.81) 0.100 (2.51) 0.040 (1.00) 0.020 (0.50) 0.071 (1.78) 0.055 (1.38) 0.152 (3.82) 0.140 (3.51) -Uni and bidirectional unit. -Excellent clamping capability. -Very fast response time. Mechanical data 0.008 (0.20)max 0.053 (1.33) 0.037 (0.93) -Case: Molded plastic. 0.01 (0.25)min -Epoxy: UL 94V-0 rate flame retardant. -Lead: Axial leads, solderable per MIL-STD-202,method 208 guranteed. Dimensions in inches and (millimeter) -Polarity: Color band denotes cathode end except bipolar. -Mounting position: Any. Maximum Rating AND Electrical Characteristics Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Value Unit Peak power dissipation at 10/1000µs waveform PPP 200 W Peak power dissipation at 8/20µs waveform PPP 1000 W Peak pulse current with a 10/1000µs waveform IPP See next table A Power dissipation on infinite heatsonk at TL = 75°C PD 0.4 W IFSM 20 A TJ,TSTG -55 to +150 °C Parameter Peak forward surge current, 8.3ms single half sone-wave undirestional only(1) Operating junction and storage temperature range Notes: Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum. REV:B Page 1 QW-BTV15 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Rating and Characteristic Curves (TV02W5V0-G Thru TV02W191-G) Fig. 1 - Pulse Derating Curve Fig.2 - Steady State Power Derating Curve 125 Peak Pulse Derating in % of Peak Power or Current, % 0.6 Steady State Power Dissipation,(W) 150 100 75 50 25 0.5 0.4 0.3 0.2 0.1 0 0 25 75 50 100 125 0 150 0 25 50 75 100 125 150 175 200 Ambient Temperature, (°C) Lead Temperature, (°C) Fig. 3 - Pulse Waveform Fig. 4 - Peak Pulse Power Rating Curve 10 Tr=10µs Peak Value(IPP) Peak Power, (kW) Peak Pulse Current, (%) 100 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays 50% of IPPM Half Value=IPP/2 50 10/1000 µ sec.Waveform as defined by R.E.A. 1 td 0 0 1 3 2 4 0.1 0.1µs Time, (ms) 1µs 10µs 100µs 1ms 10ms Pulse Width Fig. 5 - Maximum non-repetitive surge current Peak forward surge current, (A) 30 TJ = TJ max. 8.3 ms single half sine-wave 20 10 0 1 10 100 Number of cycle at 60 Hz REV:B Page 2 QW-BTV15 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Electrical Characteristics (TV02W5V0-G Thru TV02W191-G) Absolute Maximum Rating (Ta=25°C) VC (Max.) IPP @ 10/1000us IR @ VRWM Marking Code VRWM VBR Min. VBR Max. IT @ IPP (V) (V) (V) (mA) (V) (A) (uA) Uni Bi TV02W5V0(B)-G TV02W6V0(B)-G TV02W6V5(B)-G TV02W7V0(B)-G TV02W7V5(B)-G 5.0 6.0 6.5 7.0 7.5 6.40 6.67 7.22 7.78 8.33 7.00 7.37 7.98 8.60 9.21 10 10 10 10 1 9.20 10.3 11.2 12.0 12.9 21.7 19.4 17.9 16.7 15.5 400 400 250 100 50 FE FG FK FM FP KE KG KK KM KP TV02W8V0(B)-G TV02W8V5(B)-G TV02W9V0(B)-G TV02W100(B)-G TV02W110(B)-G 8.0 8.5 9.0 10 11 8.89 9.44 10.0 11.1 12.2 9.83 10.4 11.1 12.3 13.5 1 1 1 1 1 13.6 14.4 15.4 17.0 18.2 14.7 13.9 13.0 11.8 11.0 25 10 5 2.5 2.5 FR FT FV FX FZ KR KT KV KX KZ TV02W120(B)-G TV02W130(B)-G TV02W140(B)-G TV02W150(B)-G TV02W160(B)-G 12 13 14 15 16 13.3 14.4 15.6 16.7 17.8 14.7 15.9 17.2 18.5 19.7 1 1 1 1 1 19.9 21.5 23.2 24.4 26.0 10.1 9.30 8.62 8.20 7.69 2.5 1 1 1 1 HE HG HK HM HP LE JG LK LM LP TV02W170(B)-G TV02W180(B)-G TV02W190(B)-G TV02W200(B)-G TV02W220(B)-G 17 18 19 20 22 18.9 20.0 21.1 22.2 24.4 20.9 22.1 23.3 24.5 26.9 1 1 1 1 1 27.6 29.2 30.6 32.4 35.5 7.25 6.85 6.54 6.17 5.63 1 1 1 1 1 HR HT HB HV HX LR LT LB LV LX TV02W240(B)-G TV02W260(B)-G TV02W280(B)-G TV02W300(B)-G TV02W330(B)-G 24 26 28 30 33 26.7 28.9 31.1 33.3 36.7 29.5 31.9 34.4 36.8 40.6 1 1 1 1 1 38.9 42.1 45.4 48.4 53.3 5.14 4.75 4.41 4.13 3.75 1 1 1 1 1 HZ JE JG JK JM LZ ME MG MK MM TV02W360(B)-G TV02W400(B)-G TV02W430(B)-G TV02W450(B)-G TV02W480(B)-G 36 40 43 45 48 40.0 44.4 47.8 50.0 53.3 44.2 49.1 52.8 55.3 58.9 1 1 1 1 1 58.1 64.5 69.4 72.7 77.4 3.44 3.10 2.88 2.75 2.58 1 1 1 1 1 JP JR JT JV JX MP MR MT MV MX TV02W510(B)-G TV02W540(B)-G TV02W580(B)-G TV02W600(B)-G TV02W640(B)-G 51 54 58 60 64 56.7 60.0 64.4 66.7 71.1 62.7 66.3 71.2 73.7 78.6 1 1 1 1 1 82.4 87.1 93.6 96.8 103 2.43 2.30 2.14 2.07 1.94 1 1 1 1 1 JZ XE XG XK XM MZ NE NG NK NM TV02W700(B)-G TV02W750(B)-G TV02W780(B)-G TV02W800(B)-G TV02W850(B)-G 70 75 78 80 85 77.8 83.3 86.7 88.8 94.4 86.0 92.1 95.8 97.6 104 1 1 1 1 1 113 121 126 129 137 1.77 1.65 1.59 1.55 1.46 1 1 1 1 1 XP XR XT XB XV NP NR NT NB NV TV02W900(B)-G TV02W101(B)-G TV02W111(B)-G TV02W121(B)-G TV02W131(B)-G 90 100 110 120 130 100 111 122 133 144 111 123 135 147 159 1 1 1 1 1 146 162 177 193 209 1.37 1.23 1.13 1.04 0.96 1 1 1 1 1 XX XZ TE TG TK NX NZ PE PG PK TV02W141(B)-G TV02W151(B)-G TV02W161(B)-G TV02W171(B)-G TV02W181(B)-G 140 150 160 170 180 155 167 178 189 200 171 185 197 209 220 1 1 1 1 1 224 243 259 275 290 0.89 0.82 0.77 0.73 0.69 1 1 1 1 1 TB TM TP TR TT PB PM PP PR PT TV02W191(B)-G 190 211 232 1 290 0.69 1 TV PV Part No Notes: 1.Suffix B after part number to specify bi-directional devices. REV:B Page 3 QW-BTV15 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Reel Taping Specification d P0 E Index hole P1 T F W B C P A 12 o 0 D2 D1 D W1 Trailer ....... ....... End Device ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed SOD-123 SOD-123 SYMBOL A B C d D D1 D2 (mm) 1.85 ± 0.10 3.94 ± 0.10 1.57 ± 0.10 1.55 + 0.10 178 ± 1.00 54.40 ± 0.40 13.0 ± 0.20 (inch) 0.073 ± 0.004 0.155 ± 0.004 0.062 ± 0.004 0.061 + 0.004 7.008 ± 0.039 2.142 ± 0.016 0.512 ± 0.008 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 3.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 8.00+0.30/-0.10 9.50 ± 1.00 (inch) 0.069 ± 0.004 0.138± 0.002 0.158 ± 0.004 0.158 ± 0.004 0.079 ± 0.004 0.315+0.012/-0.004 0.374 ± 0.039 REV:B Page 4 QW-BTV15 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Suggested PAD Layout D SOD-123 A SIZE (mm) (inch) E A 3.35 0.132 B 0.80 0.032 C 1.00 0.039 D 4.15 0.163 E 2.55 0.100 C B Standard Packaging REEL PACK Case Type SOD-123 REEL Reel Size ( pcs ) (inch) 3,000 7 REV:B Page 5 QW-BTV15 Comchip Technology CO., LTD.