For more information, please visit the product page. date 08/07/2015 page 1 of 4 SERIES: SMI5-USB │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • up to 5 W continuous power DOE Level VI, CEC, ErP Stage 2 no load power consumption < 0.1 W universal input voltage range interchangeable Ac blades for global use over voltage and short circuit protections UL/cUL, GS, and RCM safety approvals MODEL output voltage output current output power ripple and noise1 (Vdc) max (A) max (W) max (mVp-p) 5 1 5 300 SMI5-5-I38 Notes: efficiency level VI 1. At full load, nominal Vac input, 25 °C, 20 MHz bandwidth oscilloscope, each output terminated with 0.1 μF and 10 μF capacitors. PART NUMBER KEY SMI5 - 5 - X - I38 - CXX Base Number Reserved for Custom Configurations Output Voltage Blades: V = North America, Europe, United Kingdom, Australia, and China blade included N = North America blade included E = Europe blade included B = United Kingdom blade included A = Australia blade included C = China blade included K = No blades included cui.com USB Type A Inlet For more information, please visit the product page. CUI Inc │ SERIES: SMI5-USB │ DESCRIPTION: AC-DC POWER SUPPLY date 08/07/2015 │ page 2 of 4 INPUT parameter conditions/description min voltage frequency current typ 90 47 at 115/230 Vac leakage current no load power consumption at 115/230 Vac, 60/50 Hz max units 264 Vac 63 Hz 0.2 A 0.02 mA 0.075 W max units OUTPUT parameter conditions/description min typ line regulation ±5 load regulation ±5 turn on time % % 3 s max units PROTECTIONS parameter conditions/description min typ over voltage protection over current protection output shut down, auto recovery 10 Vdc 1.5 A max units short circuit protection SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output at 10 mA for 1 minute safety approvals UL/cUL, GS, RCM EMI/EMC FCC Part 15B Class B, CE MTBF as per Telcordia SR-332 Issue 2, at 115/230 Vac, full load, 0 ~ 40°C RoHS 2011/65/EU typ 3,000 4,242 Vac Vdc 50,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature max units 0 typ 40 °C -20 60 °C operating humidity non-condensing 20 85 % storage humidity non-condensing 5 95 % cui.com For more information, please visit the product page. CUI Inc │ SERIES: SMI5-USB │ DESCRIPTION: AC-DC POWER SUPPLY date 08/07/2015 │ page 3 of 4 MECHANICAL parameter conditions/description dimensions 47 x 34.5 x 26.4 min inlet plug interchangeable blades (US, Europe, UK, Australia, China) typ max mm weight 80 MECHANICAL DRAWING units: mm PIN Output Voltage 1 +5V 2 short 3 short 4 GND +5 GND 1 4 US (N) Europe (E) units UK (B) cui.com Australia (A) China (C) g For more information, please visit the product page. CUI Inc │ SERIES: SMI5-USB │ DESCRIPTION: AC-DC POWER SUPPLY date 08/07/2015 │ page 4 of 4 REVISION HISTORY rev. 1.0 description date initial release 08/07/2015 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.