For more information, please visit the product page. date 08/23/2012 page 1 of 3 SERIES: PJ-075-SMT │ DESCRIPTION: DC POWER JACK FEATURES • low profile • surface mount • internal switch RoHS PART NUMBER KEY PJ-075 XX -SMT Base Number Center Pin Diameter CH = 1.0 mm DH = 1.3 mm SPECIFICATIONS parameter conditions/description min rated input voltage typ 16 rated input current contact resistance* between terminal and mating plug between terminal in a closed circuit insulation resistance at 500 Vdc voltage withstand at 50/60Hz for 1 minute 0.3 -25 life Notes: Vdc A 50 30 mΩ mΩ 500 Vac 3 kg 500 g MΩ any direction for 10 seconds operating temperature 85 5,000 *When measured at a current of less than 100 mA / 1 kHz cui.com units 3.5 100 insertion/withdrawl force terminal strength max °C cycles For more information, please visit the product page. CUI Inc │ SERIES: PJ-075-SMT │ DESCRIPTION: DC POWER JACK date 08/23/2012 │ page 2 of 3 SOLDERABILITY parameter conditions/description min typ max units reflow soldering see reflow profile 255 260 265 °C 270 260 250 240 217 180 120 120 60 50 °C 70 60 140 120 250 180 240 340 300 380 360 430 420 480 Time (second) MECHANICAL DRAWING units: mm[inches] TOLERANCE: X.X ±0.2mm X.XX ±0.1mm X.XXX ±0.05mm MATERIAL PLATING center pin copper nickel terminal 1 brass silver terminal 2 copper alloy silver terminal 3 brass silver shield brass nickel plastic PA6T 6.00 0.236 2.40 0.094 9.0 0.354 4.70 0.185 4.8 0.189 (5 PLCS) 2.30 0.091 3.70 0.146 0.50 0.020 (2 PLCS) 1 1.3 0.051 0.0 -0.1 (2 PLCS) 2.50 0.098 4.00 0.157 8.25 0.325 0.2 (2 PLCS) 0.2 0.008 1.3 0.051 3.7 0.146 (2 PLCS) 3 4.9 0.193 (2 PLCS) 2.25 0.089 (2 PLCS) 10.8 0.425 8.25 0.325 (2 PLCS) 2.50 0.098 (5 PLCS) 1.4 0.055 +0.1 -0.0 (2 PLCS) 0.2 0.008 4.2 0.165 (2 PLCS) 1 3 2 2 2.25 0.089 0.2 (2 PLCS) 5.4 0.213 (2 PLCS) 1 3 2 Schematic 2.50 0.098 4.00 0.157 PCB LAYOUT TOP VIEW MATING PLUG Jack Insertion Depth: 6.4mm cui.com Model Center Pin PJ-075CH-SMT ø1.0 mm PJ-075DH-SMT ø1.3 mm For more information, please visit the product page. CUI Inc │ SERIES: PJ-075-SMT │ DESCRIPTION: DC POWER JACK date 08/23/2012 │ page 3 of 3 REVISION HISTORY rev. 1.0 description date initial release 08/23/2012 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.