REV. DATE DRA-CN, SERIES www.crydom.com 01/15/11 For Technical Support: [email protected] [email protected] 3.15 80 2.97 75.5 1.23 31.4 2.70 68.5 .73 18.5 .45 11.5 .18 4.5 TRUE R.08 (5 PL) 2 2.87 73 2.32 59 .48 12.3 1.93 49 .83 21 1.04 26.3 .24 6.1 3.28 83.4 2.49 (2 PL) 63.2 1.66 (2 PL) 42.2 .83 21.2 .24 6.2 .08 2 .21 5.3 .10 2.5 CL 1.25 31.7 CL CL 3.64 92.6 CL 1.23 31.3 2.06 52.3 .85 21.7 .94 23.8 .24 6.2 3.15 80 Tolerances: ± 0.02 in / 0.5 mm. All dimensions are in: inches [millimeters] U N L E S S O T H E R W I S E S P E C I F I E D, D I M E N S I O N S A R E I N “i n [m m]” I N F O R M A T I O N I N T H I S D R A W I N G I S P R O V I D E D F O R R E F E R E N C E O N L Y A N D I S S U B J E C T T O C H A N G E.