F18 HD, CAH SERIES www.crydom.com REV. DATE For Technical Support: 11/27/10 [email protected] [email protected] 3.15 80 1.00 25.3 .12 (2 PL) 2.9 .79 20 (2 PL) .58 14.8 .25 6.4 RIVET (2PL) .38 9.7 CL .79 20 .18 4.6 .39 9.9 M5 SCREW (3 PL) .03 0.8 (2 PL) TERMINAL .12x.03 (2 PL) 1.60 40.5 .78 19.8 .88 22.4 .67 17.1 1.17 29.6 2.38 60.5 3.14 79.6 .58 14.7 .06 1.5 CL .08 (2 PL) 2 1.12 28.3 .97 24.5 .92 23.4 .56 14.1 .13 3.2 1.31 33.1 BASEPLATE CL .43 10.9 3.62 91.9 .53 13.5 .79 20 Tolerances: ± 0.02 in / 0.5 mm. All dimensions are in: inches [millimeters] U N L E S S O T H E R W I S E S P E C I F I E D, D I M E N S I O N S A R E I N “i n [m m]” I N F O R M A T I O N I N T H I S D R A W I N G I S P R O V I D E D F O R R E F E R E N C E O N L Y A N D I S S U B J E C T T O C H A N G E.