RoHS MLB03 Multilayer Ferrite Beads Dimensions: 0.039±0.004 Inches (mm) (1.0±0.10) 0.020±0.004 (0.50±0.10) 0.020±0.004 (0.50±0.10) 0.010±0.004 0.016 (0.40) (0.25±0.10) 0.016 (0.40) Allied Part Number Impedance (Ω) @ 100 MHz +/- 25% DC Resistance (Ω) Max. *Rated Current (mA) MLB03-100-RC 10 0.05 500 MLB03-400-RC 40 0.20 500 MLB03-600-RC 60 0.20 500 MLB03-700-RC 70 0.20 500 MLB03-101-RC 100 0.25 500 MLB03-121-RC 120 0.25 500 MLB03-221-RC 220 0.40 400 MLB03-301-RC 300 0.50 300 MLB03-471-RC 470 0.50 300 MLB03-601-RC 600 0.60 300 MLB03-102-RC 1000 0.95 200 MLB03-182-RC 1800 1.40 100 MLB03-222-RC 2200 1.40 100 0.018 (0.46) Features • • • • Surface mount EMI suppression components Nickel barrier termination for excellent resistance to solder heat Multi layer technology Flow and reflow soldering Electrical Impedance Range: 10Ω to 2200Ω Tolerance: 25% over entire range Operating Range: -55ºC ~ +125ºC Storage Temp: Under 25ºC at 40~60% Humidity Rated Current: Based on temp rise not to exceed 30ºC Resistance to Solder Heat Pre-Heat 150ºC, 1 minute Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260±5ºC for 10sec ±1 sec. Minimum of 75% of Electrode covered with new solder. Impedance within 30% of initial value. *Temperature rise ∆T=30ºC at rated current. All specifications subject to change without notice. Test Equipment (Z): HP4291A RF Impedance/Material Analyzer (RDC): Chen Hwa 502BC Physical Packaging: 10000 per 7 inch reel. Marking: None 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 11/04/2014 www.alliedcomponents.com