RoHS Stacked 2 x 2 RJ45 CONNECTOR WITH INTEGRATED MAGNETICS 10/100/1000 Base-T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards Impedance: 100OHMS Transmit open circuit inductance Always EU RoHS/ELV Compliant, wave solder capable to 265°C RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Operating Temperature: -40ºC to +85ºC Electrical Specifications @ 25°C Part Number ARB537-014501I OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Turns Ratio chip: cable (±3%) 1CT:1CT Insertion Loss (dB Max) 0.5-100MHz 1.1 Return Loss (dB Min) 0.5-40MHz 18 40.1-100MHz 12-20*log(f/80) Electrical Specifications @ 25°C Part Number EMI Fingers LED (L/R) ARB537-014501I YES G-Y/G-Y Cross Talk (dB Min) 0.5-40MHz 40.1-100MHz 35 33-20*log(f/50) CMRR (dB Min) 0.5-100MHz HI-POT (VDC) 30 1500 All specifications subject to change without notice. MECHANICAL Unless otherwise specified all tolerances are: ±0.25 in mm ARB537-014501I 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED15 01/17/12 www.alliedcomponents.com RoHS Stacked 2 x 2 RJ45 CONNECTOR WITH INTEGRATED MAGNETICS SCHEMATICS ARB537-014501I Notes: 1.R1-R4=75OHMS,1/16W,5%Resistors. 2.C1=1000pF,2KV Decoupling Capacitor. 3.LED Compliant With IEC60825-1 Safety of Laser Products When operated Up to 20mA. 4.LED Forward Voltage: 2.1V(TYP).LED Power Dissipation: 105mW .LED Peak Wavelength: Green=565nm, Yellow=585nm. PCB LAYOUT Unless otherwise specified all tolerances are: ±0.05 in mm ARB537-014501I MATERIALS ARB537-014501I Housing: PBT, Flammability Rating 94V-O. Shell: C2680 Brass, 0.2mm thick, 50u”Min nickel plating. Mod Jack Contacts: Phosphor Bronze, 50u" Gold plated. LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 15 01/17/12 www.alliedcomponents.com