RoHS PS80 Power Shielded Inductor .346 8.8 .295 7.5 Dimensions: .330 8.4 .059±.007 1.5±0.2 Inches (mm) .362 9.2 .173 4.4 .090±.007 2.3±0.2 .118 3.0 .090 2.3 Allied Part Number Inductance (µH) Tolerance (±%) Test Frequency (KHz, 0.5V) RDC mΩ Max Isat (A) Max Irms (A) Max PS80-R30M-RC .30 20 100 2.7 27 16 PS80-R33M-RC .33 20 100 2.7 45 22 PS80-R47M-RC .47 20 100 3.1 25 15 PS80-R56M-RC .56 100 3.1 30 20 PS80-R68M-RC .68 20 100 3.1 20 15 PS80-R82M-RC .82 20 100 4.2 21 18 PS80-1R0M-RC 1.0 20 100 4.3 15 13 PS80-1R2M-RC 1.2 20 100 5.8 16 15 PS80-1R5M-RC 1.5 20 100 6.2 11 10 10 1 20 PS80-2R2M-RC 2.2 20 100 6.2 8 PS80-3R3M-RC 3.3 20 100 9.0 5 All specifications subject to change without notice. Features • • • • • SMD Ultra High Current up to 45A Magnetically Shielded Construction Designed for low buzz noise Low DC Resistance Suitable for pick and place Electrical Inductance Range: .30µH to 3.3µH additonal values available. Tolerance: 20% over entire range Available in tighter tolerances Test Frequency: 100KHz Operating Temp: -40ºC to +125ºC Temp. Rise: ∆ T=40ºC Typical at rated Irms without without core loss. Inductance drop: 20% typical at rated Isat Part temperature should not exceed 125ºC including temperature rise. Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Immersion Time: 10 sec. ± 1 sec. Test Equipment (L): WK 4237 Meter RDC: HK502BS Meter Isat/Irms: WK3260B & DC Bias 3265B WK Physical Packaging: 500 pieces per 13 inch reel. Marking: EIA Inductance Code 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED15 07/16/2015 www.alliedcomponents.com