Frequency Control Products

VISHAY I N T E R T E C H N O L O G Y , I N C .
INTERACTIVE
data book
FREQUENCY CONTROL PRODUCTS
vishay DALE
vsE-db0020-1012
Notes:
1.
To navigate:
a) Click on the Vishay logo on any datasheet to go to the Contents page for that section. Click on the Vishay logo on any Contents
page to go to the main Table of Contents page.
b) Click on the products within the Table of Contents to go directly
to the datasheet.
c) Use the scroll or page up/page down functions.
d) Use the Adobe ® Acrobat ® page function in the browser bar.
2.
To search the text of the catalog use the Adobe ® Acrobat ® search function.
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
V I S H AY I N T E R T E C H N O L O G Y, I N C .
DATA B O O K
FREQUENCY CONTROL PRODUCTS
Quartz Crystals
Thru-Hole Oscillators
Sur face Mount Clock Oscillators
w w w. v i s h a y. c o m
SEMICONDUCTORS
RECTIFIERS
FETs
Schottky (single, dual)
Standard, Fast and Ultra-Fast Recovery
(single, dual)
Bridge
Superectifier®
Sinterglass Avalanche Diodes
HIGH-POWER DIODES AND THYRISTORS
High-Power Fast-Recovery Diodes
Phase-Control Thyristors
Fast Thyristors
PRODUCT LISTINGS
SMALL-SIGNAL DIODES
Schottky and Switching (single, dual)
Tuner/Capacitance (single, dual)
Bandswitching
PIN
Low-Voltage TrenchFET® Power MOSFETs
High-Voltage TrenchFET® Power MOSFETs
High-Voltage Planar MOSFETs
JFETs
OPTOELECTRONICS
IR Emitters and Detectors, and IR Receiver Modules
Optocouplers and Solid-State Relays
Optical Sensors
LEDs and 7-Segment Displays
Infrared Data Transceiver Modules
Custom Products
ICs
Power ICs
Analog Switches
ZENER AND SUPPRESSOR DIODES
MODULES
Zener (single, dual)
TVS (TRANSZORB®, Automotive,
ESD, Arrays)
Power Modules (contain power diodes,
thyristors, MOSFETs, IGBTs)
PASSIVE COMPONENTS
RESISTIVE PRODUCTS
MAGNETICS
Film Resistors
Metal Film Resistors
Thin Film Resistors
Thick Film Resistors
Metal Oxide Film Resistors
Carbon Film Resistors
Wirewound Resistors
Power Metal Strip® Resistors
Chip Fuses
Variable Resistors
Cermet Variable Resistors
Wirewound Variable Resistors
Conductive Plastic Variable Resistors
Networks/Arrays
Non-Linear Resistors
NTC Thermistors
PTC Thermistors
Varistors
Inductors
Transformers
CAPACITORS
Tantalum Capacitors
Molded Chip Tantalum Capacitors
Coated Chip Tantalum Capacitors
Solid Through-Hole Tantalum Capacitors
Wet Tantalum Capacitors
Ceramic Capacitors
Multilayer Chip Capacitors
Disc Capacitors
Film Capacitors
Power Capacitors
Heavy-Current Capacitors
Aluminum Capacitors
Vishay Dale
Frequency Control Products
Vishay Dale
1505 E. Highway 50
P.O. Box 180
Yankton, SD 57078-0180, USA
Phone: +1 605 665 9301
Fax: +1 605 665 1627
www.vishay.com
DISCLAIMER
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained
herein or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or
resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and
conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Table of Contents
Vishay Dale
Frequency Control Products
Alphabetical Index ....................................................................................................................................................................
2
CRYSTALS
Terms and Definitions ............................................................................................................................................................
4
Product Selector Guide .........................................................................................................................................................
5
Ordering Guide ......................................................................................................................................................................
6
Quartz Crystals
XT49S
3.579545 MHz to 66.0 MHz, Standard Footprint, “AT” Strip, 3.5 mm Profile ................................................
7
9
XT49M
3.579545 MHz to 66.0 MHz, Standard HC49/US SMD, 4.5 mm Profile ........................................................
XTUM1
10.0 MHz to 125.0 MHz, Resistance Weld, for Space Limited Applications .................................................. 11
XT36C
10.0 MHz to 70.0 MHz, Microprocessor, 1.8 mm Profile ............................................................................... 13
XT46C
10.0 MHz to 30.0 MHz, 6.0 mm x 3.5 mm x 1.1 mm, Economical Cost ........................................................ 15
OSCILLATORS
Terms and Definitions ............................................................................................................................................................ 18
Product Selector Guide ......................................................................................................................................................... 19
Ordering Guide ...................................................................................................................................................................... 20
Through-Hole Oscillators
XO-53
1.0 MHz to 100.0 MHz, Economical, 14 Pin Dip, TTL Compatible ................................................................. 21
XO-54
1.0 MHz to 100.0 MHz, 14 Pin Dip, HCMOS/TTL, Tri-State Enable/Disable Option ...................................... 23
XO-543
1.0 MHz to 100.0 MHz, 3.3 V, HCMOS/TTL, 14 Pin, Tri-State Enable/Disable Option .................................. 25
XO-52
1.0 MHz to 100.0 MHz, 8 Pin Dip, HCMOS/TTL, Tri-State Enable/Disable Option ........................................ 27
XO-523
1.0 MHz to 100.0 MHz, 3.3 V, HCMOS/TTL, 8 Pin, Tri-State Enable/Disable Option .................................... 29
Surface Mount Clock Oscillators
XOSM-52
1.0 MHz to 100.0 MHz, Gullwing, HCMOS/TLL, Tri-State Enable/Disable Option ........................................ 31
XOSM-57
1.5 MHz to 100.0 MHz, 7 mm x 5 mm x 1.9 mm, 5 V, HCMOS/TLL, Tri-State Enable/Disable Option ......... 33
XOSM-573 1.5 MHz to 100.0 MHz, 7 mm x 5 mm x 1.9 mm, 3.3 V, HCMOS/TLL, Tri-State Enable/Disable Option ...... 35
XOSM-572 1.0 MHz to 100.0 MHz, 7 mm x 5 mm x 1.9 mm, 2.5 V, HCMOS/TLL, Tri-State Enable/Disable Option ...... 37
XOSM-571 1.0 MHz to 70.0 MHz, 7 mm x 5 mm x 1.9 mm, 1.8 V, HCMOS/TLL, Tri-State Enable/Disable Option ........ 39
XOSM-533 1.544 MHz to 100.0 MHz, 5 mm x 3.2 mm x 1.3 mm, 3.3 V, HCMOS/TLL, Tri-State Enable/Disable Option 41
XOSM-532 1.544 MHz to 100.0 MHz, 5 mm x 3.2 mm x 1.3 mm, 2.5 V, HCMOS/TLL, Tri-State Enable/Disable Option 43
XOSM-531 1.544 MHz to 100.0 MHz, 5 mm x 3.2 mm x 1.3 mm, 1.8 V, HCMOS/TLL, Tri-State Enable/Disable Option 45
REFERENCE INFORMATION
Packaging Specifications ....................................................................................................................................................... 48
Tape and Reel Specifications ................................................................................................................................................ 49
Packaging Methods ............................................................................................................................................................... 50
Environmental and Mechanical Specifications ...................................................................................................................... 51
Test Circuits ........................................................................................................................................................................... 51
Soldering Profile ..................................................................................................................................................................... 52
Cross Reference .................................................................................................................................................................... 53
Revision: 02-Dec-10
www.vishay.com
1
Alphabetical Index
Vishay Dale
Frequency Control Products
Cross Reference ....................................................................................................................................................................
53
Crystals - Ordering Guide ......................................................................................................................................................
6
Crystals - Product Selector Guide .........................................................................................................................................
5
Crystals - Terms and Definitions ............................................................................................................................................
4
Environmental and Mechanical Specifications ......................................................................................................................
51
Oscillators - Ordering Guide ..................................................................................................................................................
20
Oscillators - Product Selector Guide .....................................................................................................................................
19
Oscillators - Terms and Definitions ........................................................................................................................................
18
Packaging Methods ...............................................................................................................................................................
50
Packaging Specifications .......................................................................................................................................................
48
Soldering Profile .....................................................................................................................................................................
52
Tape and Reel Specifications ................................................................................................................................................
49
Test Circuits ...........................................................................................................................................................................
51
XO-52
1.0 MHz to 100.0 MHz, 8 Pin Dip, HCMOS/TTL, Tri-State Enable/Disable Option ........................................
27
XO-523
1.0 MHz to 100.0 MHz, 3.3 V, HCMOS/TTL, 8 Pin, Tri-State Enable/Disable Option ....................................
29
XO-53
1.0 MHz to 100.0 MHz, Economical, 14 Pin Dip, TTL Compatible .................................................................
21
XO-54
1.0 MHz to 100.0 MHz, 14 Pin Dip, HCMOS/TTL, Tri-State Enable/Disable Option ......................................
23
XO-543
1.0 MHz to 100.0 MHz, 3.3 V, HCMOS/TTL, 14 Pin, Tri-State Enable/Disable Option ..................................
25
XOSM-52
1.0 MHz to 100.0 MHz, Gullwing, HCMOS/TLL, Tri-State Enable/Disable Option ........................................
31
XOSM-57
1.5 MHz to 100.0 MHz, 7 mm x 5 mm x 1.9 mm, 5 V, HCMOS/TLL, Tri-State Enable/Disable Option .........
33
XOSM-531
1.544 MHz to 100.0 MHz, 5 mm x 3.2 mm x 1.3 mm, 1.8 V, HCMOS/TLL, Tri-State Enable/Disable Option
45
XOSM-532
1.544 MHz to 100.0 MHz, 5 mm x 3.2 mm x 1.3 mm, 2.5 V, HCMOS/TLL, Tri-State Enable/Disable Option
43
XOSM-533
1.544 MHz to 100.0 MHz, 5 mm x 3.2 mm x 1.3 mm, 3.3 V, HCMOS/TLL, Tri-State Enable/Disable Option
41
XOSM-571
1.0 MHz to 70.0 MHz, 7 mm x 5 mm x 1.9 mm, 1.8 V, HCMOS/TLL, Tri-State Enable/Disable Option ........
39
XOSM-572
1.0 MHz to 100.0 MHz, 7 mm x 5 mm x 1.9 mm, 2.5 V, HCMOS/TLL, Tri-State Enable/Disable Option ......
37
XOSM-573
1.5 MHz to 100.0 MHz, 7 mm x 5 mm x 1.9 mm, 3.3 V, HCMOS/TLL, Tri-State Enable/Disable Option ......
35
XT36C
10.0 MHz to 70.0 MHz, Microprocessor, 1.8 mm Profile ...............................................................................
13
XT46C
10.0 MHz to 30.0 MHz, 6.0 mm x 3.5 mm x 1.1 mm, Economical Cost ........................................................
15
XT49M
3.579545 MHz to 66.0 MHz, Standard HC49/US SMD, 4.5 mm Profile ........................................................
9
XT49S
3.579454 MHz to 66.0 MHz, Standard Footprint, “AT” Strip, 3.5 mm Profile ................................................
7
XTUM1
10.0 MHz to 125.0 MHz, Resistance Weld, for Space Limited Applications ..................................................
11
www.vishay.com
2
Revision: 02-Dec-10
Contents
Crystals
Terms and Definitions ...........
4
Product Selector Guide .........
5
Ordering Guide......................
6
XT49S ...................................
7
XT49M...................................
9
XTUM1 ..................................
11
XT36C ...................................
13
XT46C ...................................
15
Terms and Definitions
Vishay Dale
Crystals
QUARTZ
Quartz is formed from silicon and oxygen. It grows naturally or can be cultured in autoclaves under high pressure and heat.
Most quartz used today by crystal manufacturers is cultured so that its purity and quality can be controlled. Quartz is used in
Frequency Control Products because of its piezoelectric properties.
PIEZOELECTRIC EFFECT
When pressure is applied on a quartz crystal, a voltage is generated. The voltage produces a mechanical motion and vibration.
The frequency of these vibrations is measured in hertz.
OPERATING MODES
A crystal can operate in a circuit in one of two modes, series or parallel.
• SERIES RESONANCE:
When a crystal is operated at series resonance it appears resistive and no load capacitor is required.
• PARALLEL MODE:
Crystals operated in this mode appear inductive in the circuit. A load capacitor must be specified for the crystal to operate at
the proper frequency. Typical values of load capacitors at 18 pF, 20 pF, 30 pF or 32 pF.
FREQUENCY STABILITY
This is the allowable deviation from nominal frequency over a specified temperature range. It is expressed in ppm or % of
nominal frequency.
FREQUENCY TOLERANCE
This is the maximum allowable deviation from the nominal frequency at 25 °C.
FUNDAMENTAL AND OVERTONE CRYSTALS
A crystal vibrates at many frequencies. The lowest frequency is called the fundamental mode and is usually supplied up to
30 MHz. Higher frequencies are achieved by operating the crystal at odd overtones (3rd, 5th, 7th, and 9th) and tuning the circuit
so the crystal operates at the designed overtone frequency.
PULLABILITY
The change in frequency (measured in ppm) for a given change in the parallel load capacitance is the pullability of the crystal.
This will be specified for special applications such as VCXOs.
EQUIVALENT SERIES RESISTANCE
This is the resistance of the crystal measured at the series resonance frequency. The resistance measured at the parallel load
resonant frequency is called the effective resistance.
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 35045
Revision: 14-Jun-05
Product Selector Guide
Vishay Dale
Crystals
SELECTOR GUIDE - CRYSTALS
FREQUENCY TEMPERATURE
STABILITY
TOLERANCE
(TYPICAL)
(TYPICAL)
TEMPERATURE
RANGE
KEY FEATURES
30 ppm
- 20 °C to + 70 °C
Industry standard
3.5 mm profile
Low cost
Hermetically sealed
30 ppm
30 ppm
- 20 °C to + 70 °C
Industry standard
4.5 mm profile
Low cost
Hermetically sealed
10.0 MHz to
125.0 MHz
10 ppm
10 ppm
- 40 °C to + 85 °C
Miniature package
Wide frequency range
XT36C
10.0 MHz to
70.0 MHz
50 ppm
50 ppm
- 10 °C to + 70 °C
Surface mountable
1.6 mm profile
XT46C
10.0 MHz to
30.0 MHz
30 ppm
30 ppm
- 10 °C to + 60 °C
Miniature package
Low cost
PRODUCT
FREQUENCY
RANGE
XT49S
3.579545 MHz
to 66.0 MHz
30 ppm
XT49M
3.579545 MHz
to 66.0 MHz
XTUM1
Document Number: 35048
Revision: 23-Nov-10
For technical questions, contact: [email protected]
www.vishay.com
5
Ordering Guide
Vishay Dale
Crystals
Global Part Numbering
GLOBAL PART NUMBERING
X
T
9
S
MODEL NUMBER
XT9S = XT49S
XT9M = XT49M
XTU1 = XTUM1
2
0
A
LOAD
CAPACITANCE
PACKAGE
CODE
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
Tape and reel
G = RF5 (XT9S)
H = RF7 (XT9M)
Bulk
A = B04
(all models)
N
A
4
0
M
OPTIONS
FREQUENCY
NA = no additional
options
RR = extended
temperature
of - 40 °C to + 85 °C
Contact factory for
all other options
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT49S-20 40M
X
T
3
6
2
0
MODEL NUMBER
LOAD CAPACITANCE
XT46 = XT46C
XT36 = XT36C
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
A
PACKAGE
CODE
Tape and reel
H = RF7
Bulk
A = B04
(all models)
1
2
M
FREQUENCY
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT36C-20 12M
www.vishay.com
6
For technical questions, contact: [email protected]
Document Number: 35003
Revision: 10-Oct-07
XT49S
Vishay Dale
Low Profile Holder Type Crystal Units
FEATURES
• Low cost
• Industry standard
• Wide frequency range
• Excellent aging
• Compliant to RoHS Directive 2002/95/EC
This part is a miniature AT cut strip crystal unit with a low
profile package. It is with resistance weld.
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
Frequency range
CONDITION
FO
UNIT
MIN.
TYP.
MAX.
MHz
3.579545
-
66.000
Frequency tolerance
ΔF/FO
at 25 °C
ppm
- 30
-
+ 30
Temperature stability
TC
ref. to 25 °C
ppm
- 50
-
+ 50
°C
- 10
-
+ 70
Operating temperature range
TOPR
Storage temperature range
TSTG
°C
- 55
-
+ 125
Shunt capacitance
C0
pF
-
-
7
Load capacitance
CL
customer specified
pF
10
-
series
Insulation resistance
IR
100 VDC
MΩ
500
-
-
Drive level
DL
μW
-
100
500
Aging (first year)
Fa
ppm
-5
-
+5
at 25 °C, per year
EQUIVALENT SERIES RESISTANCE (ESR) AND MODE OF VIBRATION (MODE)
FREQUENCY RANGE (MHz)
MAX. ESR (Ω)
MODE
FREQUENCY RANGE (MHz)
MAX. ESR (Ω)
MODE
3.579 to 3.999
200
fundamental/AT
10.000 to 13.999
80
fundamental/AT
4.000 to 4.999
150
fundamental/AT
14.000 to 39.999
50
fundamental/AT
5.000 to 5.999
120
fundamental/AT
40.000 to 66.000
80
3rd overtone
6.000 to 9.999
100
fundamental/AT
DIMENSIONS in inches [millimeters]
0.403 [10.24] max.
0.150 [3.81] max.
0.435 [11.05] max.
0.138 [3.5]
max.
0.183 [4.65]
max.
0.500 [12.7]
min.
0.192 ± 0.008
[4.88 ± 0.2]
Document Number: 35014
Revision: 19-Mar-10
Ø 0.017 ± 0.002
[0.43 ± 0.05]
For technical questions, contact: [email protected]
www.vishay.com
7
XT49S
Low Profile Holder Type Crystal Units
Vishay Dale
ORDERING INFORMATION
XT49S
R
-20
SP
12M
e2
MODEL
OTR
blank = standard
R = - 40 °C to + 85 °C
LOAD
blank = series
-16 = 16 pF
-20 = 20 pF standard
-30 = 30 pF
-32 = 32 pF
OPTIONS
blank = standard
SP = spacer
SL = sleeve
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
X
T
9
S
2
MODEL
0
A
LOAD
PACKAGE
CODE
0
A
N
A
1
OPTION
2
M
FREQUENCY
GLOBAL PART NUMBERING
X
T
9
S
MODEL NUMBER
XT9S = XT49S
XT9M = XT49M
XTU1 = XTUM1
2
LOAD
CAPACITANCE
PACKAGE
CODE
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
Tape and reel
G = RF5 (XT9S)
H = RF7 (XT9M)
Bulk
A = B04
(all models)
N
A
4
0
M
OPTIONS
FREQUENCY
NA = no additional
options
RR = extended
temperature
of - 40 °C to + 85 °C
Contact factory for
all other options
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT49S-20 40M
X
T
3
6
2
0
MODEL NUMBER
LOAD CAPACITANCE
XT46 = XT46C
XT36 = XT36C
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
A
PACKAGE
CODE
Tape and reel
H = RF7
Bulk
A = B04
(all models)
1
2
M
FREQUENCY
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT36C-20 12M
www.vishay.com
8
For technical questions, contact: [email protected]
Document Number: 35014
Revision: 19-Mar-10
XT49M
Vishay Dale
Low Profile SMD Type Crystal Units
FEATURES
• Low cost
• Industry standard
• Wide frequency range
• Excellent aging
• Surface mount
• Compliant to RoHS Directive 2002/95/EC
This part is a miniature AT cut strip crystal unit packaged for
surface mounting.
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
Frequency range
CONDITION
FO
UNIT
MIN.
TYP.
MAX.
MHz
3.579545
-
66.000
Frequency tolerance
ΔF/FO
at 25 °C
ppm
- 30
-
+ 30
Temperature stability
TC
ref. to 25 °C
ppm
- 50
-
+ 50
Operating temperature range
TOPR
°C
- 10
-
+ 70
Storage temperature range
TSTG
°C
- 55
-
+ 125
Shunt capacitance
C0
pF
-
-
7
Load capacitance
CL
customer specified
pF
10
-
series
Insulation resistance
IR
100 VDC
MΩ
500
-
-
Drive level
DL
μW
-
100
500
Aging
Fa
ppm
-5
-
+5
at 25 °C, per year
EQUIVALENT SERIES RESISTANCE (ESR) AND MODE OF VIBRATION (MODE)
FREQUENCY RANGE (MHz)
MAX. ESR (Ω)
MODE
FREQUENCY RANGE (MHz)
MAX. ESR (Ω)
MODE
3.579 to 3.999
200
fundamental/AT
10.000 to 13.999
80
fundamental/AT
4.000 to 4.999
150
fundamental/AT
14.000 to 39.999
50
fundamental/AT
5.000 to 5.999
120
fundamental/AT
40.000 to 66.999
80
3rd overtone
6.000 to 9.999
100
fundamental/AT
DIMENSIONS in inches [millimeters]
0.403 [10.24] max.
Crystal Unit
0.008 [0.2]
0.177 [4.5]
max.
max.
0.150 [3.8]
max.
0.012 [0.3]
max.
0.484 ± 0.024
[12.3 ± 0.6]
0.437 + 0.020/- 0.031
[11.1 + 0.50/- 0.80]
0.150 [3.8] max.
Insulation Base
0.376 [9.55]
Crystal Lead
0.031 ± 0.012
[0.8 ± 0.3]
0.201 ± 0.020
[5.1 ± 0.5]
Document Number: 35012
Revision: 19-Mar-10
0.081
[2.05]
0.185 ± 0.012
[4.7 ± 0.3]
0.219 [5.55]
Solder Pattern
For technical questions, contact: [email protected]
www.vishay.com
9
XT49M
Low Profile SMD Type Crystal Units
Vishay Dale
ORDERING INFORMATION
XT49M
R
-20
20M
e2
MODEL
OTR
blank = standard
R = - 40 °C to + 85 °C
LOAD
blank = series
-20 = 20 pF
-30 = 30 pF
-32 = 32 pF
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
X
T
9
M
2
MODEL
0
A
LOAD
PACKAGE
CODE
0
A
N
A
2
OPTION
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
T
9
S
MODEL NUMBER
XT9S = XT49S
XT9M = XT49M
XTU1 = XTUM1
2
LOAD
CAPACITANCE
PACKAGE
CODE
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
Tape and reel
G = RF5 (XT9S)
H = RF7 (XT9M)
Bulk
A = B04
(all models)
N
A
4
0
M
OPTIONS
FREQUENCY
NA = no additional
options
RR = extended
temperature
of - 40 °C to + 85 °C
Contact factory for
all other options
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT49S-20 40M
X
T
3
6
2
0
MODEL NUMBER
LOAD CAPACITANCE
XT46 = XT46C
XT36 = XT36C
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
A
PACKAGE
CODE
Tape and reel
H = RF7
Bulk
A = B04
(all models)
1
2
M
FREQUENCY
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT36C-20 12M
www.vishay.com
10
For technical questions, contact: [email protected]
Document Number: 35012
Revision: 19-Mar-10
XTUM1
Vishay Dale
Resistance Welded Miniature Crystal Units
FEATURES
• Low cost
• Industry standard
• Small compact size
• Wide frequency range
• High stability
• “AT” cut crystal
The XTUM1 crystal unit is a miniature resistance welded
package that provides excellent hermetic seal and
frequency aging. The frequency range till 125 MHz and
miniature size is ideal for communication equipment.
• Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
Frequency tolerance
SYMBOL
FO
ΔF/FO
Temperature stability
TC
Operating temperature range
TOPR
Storage temperature range
Shunt capacitance
Load capacitance
Insulation resistance
Drive level
Aging
TSTG
C0
CL
IR
DL
Fa
CONDITION
at 25 °C
see Frequency
Stability vs.
Temperature Range
customer specified
100 VDC
at 25 °C, per year
UNIT
MHz
ppm
MIN.
10.000
-
TYP.
± 10
MAX.
125.000
± 50
ppm
-
± 10
± 50
°C
-
-
-
°C
pF
pF
MΩ
μW
ppm
- 40
10
500
-5
100
-
+ 85
7
series
500
+5
EQUIVALENT SERIES RESISTANCE (ESR) AND MODE OF VIBRATION (MODE)
FREQUENCY RANGE (MHz)
10.000 to 12.999
13.000 to 19.999
20.000 to 29.999
30.000 to 39.999
MAX. ESR (Ω)
60
40
30
60
MODE
fundamental
fundamental
fundamental
fundamental
FREQUENCY RANGE (MHz)
40.000 to 59.999
60.000 to 79.999
80.000 to 125.000
MAX. ESR (Ω)
50
50
100
MODE
fundamental
3rd overtone
5th overtone
FREQUENCY STABILITY VS. TEMPERATURE RANGE (25 °C ± 3 °C)
TEMPERATURE RANGE (°C)
0 to 50
- 10 to 60
- 20 to 70
- 40 to + 85
±5
x
x
± 10
x
x
x
FREQUENCY STABILITY (ppm)
± 15
± 20
x
x
x
x
x
x
x
± 30
x
x
x
x
± 50
x
x
x
x
DIMENSIONS in inches [millimeters]
0.094 [2.40] max.
0.280 [7.10] max.
0.311 [7.90] max.
0.319
[8.10]
max.
0.126 [3.20]
max.
0.500
[12.7]
min.
0.148 ± 0.008 [3.75 ± 0.2]
Document Number: 35020
Revision: 09-Mar-10
0.014 ± 0.002 [0.36 ± 0.05]
For technical questions, contact: [email protected]
www.vishay.com
11
XTUM1
Resistance Welded Miniature Crystal Units
Vishay Dale
ORDERING INFORMATION
XTUM1
-18
20M
e2
MODEL
LOAD
blank = series
-32 = 32 pF
-18 = 18 pF standard
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
X
T
U
1
1
MODEL
8
A
LOAD
PACKAGE
CODE
0
A
N
A
2
OPTION
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
T
9
S
MODEL NUMBER
XT9S = XT49S
XT9M = XT49M
XTU1 = XTUM1
2
LOAD
CAPACITANCE
PACKAGE
CODE
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
Tape and reel
G = RF5 (XT9S)
H = RF7 (XT9M)
Bulk
A = B04
(all models)
N
A
4
0
M
OPTIONS
FREQUENCY
NA = no additional
options
RR = extended
temperature
of - 40 °C to + 85 °C
Contact factory for
all other options
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT49S-20 40M
X
T
3
6
2
0
MODEL NUMBER
LOAD CAPACITANCE
XT46 = XT46C
XT36 = XT36C
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
A
PACKAGE
CODE
Tape and reel
H = RF7
Bulk
A = B04
(all models)
1
2
M
FREQUENCY
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT36C-20 12M
www.vishay.com
12
For technical questions, contact: [email protected]
Document Number: 35020
Revision: 09-Mar-10
XT36C
Vishay Dale
Surface Mount Crystal
FEATURES
• Miniature size: 8.0 x 4.5 x 1.8 (mm)
• Wide frequency range
• Glass sealing
• Emboss taping
• Compliant to RoHS Directive 2002/95/EC
The XT36C part is a miniature SMD crystal with 8.0 x 4.5 (mm)
ceramic package and a height of 1.8 mm maximum. It
is widely applied in notebook computer, PCMCIA, and
communication equipment.
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
Frequency range
Frequency tolerance
Temperature stability
CONDITION
UNIT
MIN.
TYP.
MAX.
MHz
10.000
-
70.000
ΔF/FO
at 25 °C
ppm
-
± 50
-
TC
ref. to 25 °C
FO
ppm
-
± 50
-
Operating temperature range
TOPR
°C
- 10
-
+ 60
Storage temperature range
TSTG
°C
- 55
-
+ 125
Shunt capacitance
C0
pF
-
-
7
Load capacitance
CL
customer specified
pF
10
-
series
Insulation resistance
IR
100 VDC
MΩ
500
-
-
Drive level
DL
μW
-
10
500
Aging
Fa
ppm
-5
-
+5
at 25 °C, per year
EQUIVALENT SERIES RESISTANCE (ESR) AND MODE OF VIBRATION (MODE)
FREQUENCY RANGE (MHz)
MAX. ESR (Ω)
MODE
FREQUENCY RANGE (MHz)
MAX. ESR (Ω)
MODE
10.000 to 10.999
110
fundamental
20.000 to 31.999
25
fundamental
11.000 to 14.099
50
fundamental
32.000 to 47.999
110
3rd overtone
14.100 to 17.999
45
fundamental
48.000 to 70.000
100
3rd overtone
18.000 to 19.999
30
fundamental
DIMENSIONS in inches [millimeters]
0.315 ± 0.012
[8.00 ± 0.3]
Recommended Solder Pattern
MARKING
AREA
0.177 ± 0.012
[4.5 ± 0.3]
0.094 [2.4]
0.079 ± 0.002
[2.0 ± 0.05]
0.110 [2.8]
0.059
[1.5]
0.260 [6.6]
0.071 [1.80] max.
Document Number: 35010
Revision: 09-Mar-10
For technical questions, contact: [email protected]
www.vishay.com
13
XT36C
Surface Mount Crystal
Vishay Dale
ORDERING INFORMATION
XT36C
-20
24M
e4
MODEL
LOAD
blank = series
-12 = 12 pF
-16 = 16 pF
-20 = 20 pF
-32 = 32 pF
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
X
T
3
6
2
MODEL
0
A
LOAD
2
PACKAGE
CODE
4
M
FREQUENCY
GLOBAL PART NUMBERING
X
T
9
S
MODEL NUMBER
XT9S = XT49S
XT9M = XT49M
XTU1 = XTUM1
2
0
A
LOAD
CAPACITANCE
PACKAGE
CODE
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
Tape and reel
G = RF5 (XT9S)
H = RF7 (XT9M)
Bulk
A = B04
(all models)
N
A
4
0
M
OPTIONS
FREQUENCY
NA = no additional
options
RR = extended
temperature
of - 40 °C to + 85 °C
Contact factory for
all other options
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT49S-20 40M
X
T
3
6
2
0
MODEL NUMBER
LOAD CAPACITANCE
XT46 = XT46C
XT36 = XT36C
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
A
PACKAGE
CODE
Tape and reel
H = RF7
Bulk
A = B04
(all models)
1
2
M
FREQUENCY
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT36C-20 12M
www.vishay.com
14
For technical questions, contact: [email protected]
Document Number: 35010
Revision: 09-Mar-10
XT46C
Vishay Dale
Surface Mount Crystal
FEATURES
• Ultra-miniature size: 6.0 x 3.5 x 1.0 (mm)
• Seam sealing
• Ceramic package
• Emboss taping
• Reflow soldering
• Compliant to RoHS Directive 2002/95/EC
This part is an ultra miniature package with size of
6.0 mm x 3.5 mm x 1.0 mm. With its ceramic base and metal
cover it provides the durability and reliability necessary for
strenuous process like infrared and vapor phase reflow.
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
SYMBOL
CONDITION
FO
UNIT
MIN.
TYP.
MAX.
MHz
10.000
-
30.000
-
Frequency tolerance
ΔF/FO
at 25 °C
ppm
-
± 30
Temperature stability
TC
ref. to 25 °C
ppm
-
± 30
-
°C
- 10
-
+ 60
+ 85
Operating temperature range
TOPR
Storage temperature range
TSTG
°C
- 40
-
Shunt capacitance
C0
pF
-
-
7
Load capacitance
CL
customer specified
pF
10
-
series
Insulation resistance
IR
100 VDC
MΩ
500
-
-
Drive level
DL
μW
-
10
100
Aging
Fa
ppm
-5
-
+5
at 25 °C, per year
EQUIVALENT SERIES RESISTANCE (ESR) AND MODE OF VIBRATION (MODE)
FREQUENCY RANGE (MHz)
MAX. ESR (Ω)
MODE
FREQUENCY RANGE (MHz)
MAX. ESR (Ω)
MODE
10.000 to 11.999
60
fundamental
19.000 to 19.999
40
fundamental
12.000 to 12.099
50
fundamental
20.000 to 29.999
35
fundamental
13.000 to 18.999
45
fundamental
30.000
30
fundamental
DIMENSIONS in inches [millimeters]
0.236 ± 0.008
[6.0 ± 0.2]
MARKING
AREA
0.138 ± 0.008
[3.5 ± 0.2]
0.055
[1.4]
0.039 ± 0.4
[1.0 ± 0.1]
0.118 ± 0.004
[3.0 ± 0.10]
0.035 [0.9]
0.055 [1.4]
0.089 [1.5]
0.043 [1.1]
0.035 [0.9]
0.055 [1.4]
0.077 0.094 0.077
[1.95] [2.4] [1.95]
0.055
[1.4]
Recommended Solder Pattern
Note
Pin #2 and pin #4 are connected through cover, in case
connected to GND. Frequency might be drifted.
0.236 ± 0.008
[6.0 ± 0.2]
Document Number: 35021
Revision: 09-Mar-10
For technical questions, contact: [email protected]
www.vishay.com
15
XT46C
Surface Mount Crystal
Vishay Dale
ORDERING INFORMATION
XT46C
-20
25M
e4
MODEL
LOAD
blank = series
-20 = 20 pF standard
-32 = 32 pF
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
STANDARD
GLOBAL PART NUMBER
X
T
4
6
2
MODEL
0
A
LOAD
2
PACKAGE
CODE
5
M
FREQUENCY
GLOBAL PART NUMBERING
X
T
9
S
MODEL NUMBER
XT9S = XT49S
XT9M = XT49M
XTU1 = XTUM1
2
0
A
LOAD
CAPACITANCE
PACKAGE
CODE
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
Tape and reel
G = RF5 (XT9S)
H = RF7 (XT9M)
Bulk
A = B04
(all models)
N
A
4
0
M
OPTIONS
FREQUENCY
NA = no additional
options
RR = extended
temperature
of - 40 °C to + 85 °C
Contact factory for
all other options
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT49S-20 40M
X
T
3
6
2
0
MODEL NUMBER
LOAD CAPACITANCE
XT46 = XT46C
XT36 = XT36C
18 = 18 pF
20 = 20 pF
NL = series
to be specified by
customer
A
PACKAGE
CODE
Tape and reel
H = RF7
Bulk
A = B04
(all models)
1
2
M
FREQUENCY
4M = 4 MHz
40M = 40 MHz
100M = 100 MHz
12M288 = 12.288 MHz
M is used as
decimal place
holder in frequency
Example: XT36C-20 12M
www.vishay.com
16
For technical questions, contact: [email protected]
Document Number: 35021
Revision: 09-Mar-10
Contents
Oscillators
Terms and Definitions ...........
18
Product Selector Guide .........
19
Ordering Guide......................
20
XO-53....................................
21
XO-54....................................
23
XO-543..................................
25
XO-52....................................
27
XO-523..................................
29
XOSM-52 ..............................
31
XOSM-57 ..............................
33
XOSM-573 ............................
35
XOSM-572 ............................
37
XOSM-571 ............................
39
XOSM-533 ............................
41
XOSM-532 ............................
43
XOSM-531 ............................
45
Terms and Definitions
Vishay Dale
Oscillators
OSCILLATOR
An oscillator is a circuit that generates an output signal though feedback and amplification.
CLOCK OSCILLATOR
A clock oscillator is a device that establishes a reference frequency for timing purposes such as sequencing events in a
computer.
LOGIC
This is the terminology used for families of active devices used in the manufacturing of clock oscillator. The most popular are
TTL, HCMOS, CMOS, and ECL.
LOAD/FAN-OUT
The maximum load, specified in number of gates or in maximum load capacity, that a family of oscillators can drive is defined as
the output load of driving capability.
RISE TIME
The rise time is defined as the transition time of the output waveform from low state to high state.
FALL TIME
The fall time is defined as the transition time of the output waveform from high state to low state.
SYMMETRY
Symmetry is the time the waveform is above the threshold vs. below the threshold. 50/50 is perfect symmetry.
TRI-STATE
The tri-state option allows the oscillator to be isolated from the circuit upon application of a command signal. When this feature
is activated, the output goes to a high impedance state.
SUPPLY VOLTAGE
The DC input voltage necessary for oscillator operation.
INPUT CURRENT
The amount of current consumed by an oscillator from the power supply.
FREQUENCY STABILITY (Variation of Frequency from Nominal)
This is inclusive of calibration tolerance at 25 °C, temperature change, input voltage change, load change, aging, shock, and
vibration.
www.vishay.com
18
For technical questions, contact: [email protected]
Document Number: 35046
Revision: 14-Jun-05
Product Selector Guide
Vishay Dale
Oscillators
SELECTOR GUIDE - OSCILLATORS
FREQUENCY
RANGE
FREQUENCY
STABILITY
TEMPERATURE
RANGE
KEY FEATURES
XO-53
1 MHz to 100 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
TTL compatible
14 pin dip
XO-54
1 MHz to 100 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
14 pin dip
HCMOS/TTL compatible
Tri-state output available
XO-543
1 MHz to 100 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
3.3 V operation
HCMOS/TTL compatible
Tri-state output available
XO-52
1 MHz to 100 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
8 pin dip
HCMOS/TTL compatible
Tri-state output available
XO-523
1 MHz to 100 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
3.3 V operation
HCMOS/TTL compatible
Tri-state output available
XOSM-52
1 MHz to 100 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
Surface mount
HCMOS/TTL compatible
Tri-state output available
XOSM-57
1.5 MHz to 100 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
Surface mount
HCMOS/TTL compatible
Tri-state output
XOSM-573
1.5 MHz to 100 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
Surface mount
3.3 V operation
HCMOS/TTL
Tri-state output
Surface mount
2.5 V operation
HCMOS/TTL
Tri-state output
PRODUCT
XOSM-572
1 MHz to 100 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
XOSM-571
1 MHz to 70 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
Surface mount
1.8 V operation
HCMOS/TTL
Tri-state output
Surface mount
3.3 V operation
HCMOS/TTL
Tri-state output
XOSM-533
1.544 MHz to 100 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
XOSM-532
1.544 MHz to 100 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
Surface mount
2.5 V operation
HCMOS/TTL
Tri-state output
XOSM-531
1.544 MHz to 100 MHz
(100/50/25) ppm
0 °C to + 70 ° C
(- 40 °C to + 85 °C)
Surface mount
1.8 V operation
HCMOS/TTL
Tri-state output
Document Number: 35052
Revision: 09-Dec-10
For technical questions, contact: [email protected]
www.vishay.com
19
Ordering Guide
Vishay Dale
Oscillators
Global Part Numbering
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
www.vishay.com
20
For technical questions, contact: [email protected]
Document Number: 35002
Revision: 10-Oct-07
XO-53
Vishay Dale
Full Size Clock Oscillators TTL Compatible
FEATURES
• 10 TTL output load
• Size: 14 pin full size
• Industry standard
• Wide frequency range
The XO-53 series oscillator is TTL compatible and features
fast rise/fall times with high reliability at low cost. The metal
package with pin 7 case ground acts as shielding to
minimize EMI radiation.
• Low cost
• Resistance weld package
• Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
CONDITION
VALUE
FO
-
1.0 MHz to 100.000 MHz
all conditions
± 25 ppm, ± 50 ppm, ± 100 ppm
Frequency range
Frequency stability (1)
0 °C to 70 °C
Operating temperature range
TOPR
-
Storage temperature range
TSTG
-
- 55 °C to + 125 °C
Power supply voltage
VDD
-
5.0 V ± 10 %
25 ºC ± 3 ºC
± 5 ppm
Aging (first year)
Supply current
IDD
- 40 °C to + 85 °C (option)
1.0 MHz to 23.999 MHz
15 mA max.
24.000 MHz to 69.999 MHz
30 mA max.
70.000 MHz to 100.000 MHz
60 mA max.
Sym
at 1.4 V
40 %/60 % (45 %/55 % option)
Rise time
tr
0.4 V to 2.4 V
5 ns max.
Fall time
tf
2.4 V to 0.4 V
5 ns max.
VOH
-
2.4 V min.
VOL
-
0.4 V max.
Output load
TTL load
-
1 TTL to 10 TTL
Start-up time
ts
-
10 ms max.
Output symmetry
Output voltage
Note
(1) Include: 25 °C tolerance, operating temperature range, input voltage change, aging, load change, shock and vibration
DIMENSIONS in inches [millimeters]
TTL TEST CIRCUIT
#1
MARKING
AREA
A
#7
#14
RL = 400 Ω
TEST POINT
0.300 ± 0.005
[7.62 ± 0.13]
0.508
[12.9] max.
+ 5.0 V V
0.01 µF
#8
#14
#1
#8
#7
15 pF (2)
0.600 ± 0.005
[15.24 ± 0.13]
0.803 [20.4] max.
Note
(2)
Includes Stray and Probe Capacitance
TTL OUTPUT WAVEFORM
0.031 ± 0.003
[0.8 ± 0.1]
0.200
[5.08] max.
0.018 ± 0.003
[0.45 ± 0.1]
Tr
VOH
0.268
[6.80] max.
PIN
#1
#7
#8
#14
CONNECTION
N.C
GND
OUTPUT
VDD
2.4 V
1.4 V
VOL
0.4 V
GND
T1
T0 = 1/Fo
Document Number: 35023
Revision: 24-Nov-10
Tf
For technical questions, contact: [email protected]
SYMMETRY =
T1
x 100 %
T0
www.vishay.com
21
XO-53
Full Size Clock Oscillators TTL Compatible
Vishay Dale
ORDERING INFORMATION
XO-53
B
R
40M
e2
MODEL
FREQUENCY STABILITY
OTR
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
B = 0.01 % (100 ppm)
standard
blank = 0 °C to + 70 °C
R = - 40 °C to + 85 °C
standard
GLOBAL PART NUMBER
X
O
5
3
MODEL
C
T
D
N
FREQUENCY
STABILITY
OTR
PACKAGE
CODE
A
4
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M2803XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
22
For technical questions, contact: [email protected]
Document Number: 35023
Revision: 24-Nov-10
XO-54
Vishay Dale
Full Size Clock Oscillators TTL/HCMOS Compatible
FEATURES
The XO-54 series oscillator is full size tri-state
enable/disable control. The metal package with pin 7 case
ground acts as shielding to minimize EMI radiation.
•
•
•
•
•
•
•
•
Size: 14 pin full size
Industry standard
Wide frequency range
Low cost
Tri-state enable/disable
Resistance weld package
5V
Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
Frequency stability (1)
SYMBOL
FO
CONDITION
all conditions
Operating temperature range
TOPR
-
Storage temperature range
Power supply voltage
Aging (first year)
TSTG
VDD
25 °C ± 3 °C
1.000 MHz to 23.999 MHz
24.000 MHz to 49.999 MHz
50.000 MHz to 69.999 MHz
70.000 MHz to 100.000 MHz
at ½ VDD
10 % VDD to 90 % VDD
90 % VDD to 10 % VDD
-
Supply current
IDD
Output symmetry
Rise time
Fall time
Sym
tr
tf
VOH
VOL
TTL load
Output voltage
Output load
HCMOS load
Start-up time
ts
Pin 1, tri-state function
-
VALUE
1.000 MHz to 100.000 MHz
± 25 ppm, ± 50 ppm, ± 100 ppm
0 ºC to 70 ºC
- 40 ºC to + 85 ºC (option)
- 55 ºC to + 125 ºC
5.0 V ± 10 %
± 5 ppm
20 mA max.
30 mA max.
40 mA max.
60 mA max.
40 %/60 % (45 %/55 % option)
10 ns max.
10 ns max.
90 % VDD min.
10 % VDD max.
1 TTL to 10 TTL
to 50M: 50 pF
to 70M: 30 pF
to 100M: 15 pF
10 ms max.
pin 1 = H or open (output active at pin 3)
pin 1 = L (high impedance at pin 3)
Note
(1) Include: 25 ºC tolerance, operating temperature range, input voltage change, aging, load change, shock and vibration
DIMENSIONS in inches [millimeters]
CMOS
LOAD
CL (1)
max.
Note
(1)
Includes Stray and Probe Capacitance
max.
OH
DD
max.
IH ≥
DC
DD
OL
DD
max.
DD
Document Number: 35024
Revision: 24-Nov-10
For technical questions, contact: [email protected]
www.vishay.com
23
XO-54
Full Size Clock Oscillators TTL/HCMOS
Compatible
Vishay Dale
ORDERING INFORMATION
XO-54
B
R
MODEL
FREQUENCY STABILITY
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
B = 0.01 % (100 ppm)
standard
E
40M
e2
OTR
ENABLE/DISABLE
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
blank = 0 °C to + 70 °C
R = - 40 °C to + 85 °C
blank = pin 1 open
E = disable to tri-state
standard
GLOBAL PART NUMBER
X
O
5
4
MODEL
C
T
E
D
N
FREQUENCY
STABILITY
OTR
ENABLE/
DISABLE
PACKAGE
CODE
A
4
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M2803XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
24
For technical questions, contact: [email protected]
Document Number: 35024
Revision: 24-Nov-10
XO-543
Vishay Dale
Full Size Clock Oscillators TTL/HCMOS Compatible
FEATURES
The XO-543 series is with 3.3 V power supply. The metal
package with pin 7 case ground acts as shielding to
minimize EMI radiation.
•
•
•
•
•
•
•
•
Size: 14 pin full size
Industry standard
Wide frequency range
Low cost
Tri-state enable/disable
Resistance weld package
3.3 V
Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
Frequency stability (1)
SYMBOL
FO
CONDITION
all conditions
Operating temperature range
TOPR
-
Storage temperature range
Power supply voltage
Aging (first year)
TSTG
VDD
25 °C ± 3 °C
1.000 MHz to 23.999 MHz
24.000 MHz to 49.999 MHz
50.000 MHz to 69.999 MHz
70.000 MHz to 100.000 MHz
at ½ VDD
10 % VDD to 90 % VDD
90 % VDD to 10 % VDD
-
Supply current
IDD
Output symmetry
Rise time
Fall time
Sym
tr
tf
VOH
VOL
TTL load
Output voltage
Output load
HCMOS load
Start-up time
ts
Pin 1, tri-state function
-
VALUE
1.000 MHz to 100.000 MHz
± 25 ppm, ± 50 ppm, ± 100 ppm
0 ºC to 70 ºC
- 40 ºC to + 85 ºC (option)
- 55 ºC to + 125 ºC
3.3 V ± 10 %
± 5 ppm
15 mA max.
20 mA max.
30 mA max.
45 mA max.
40 %/60 % (45 %/55 % option)
8 ns max.
8 ns max.
90 % VDD min.
10 % VDD max.
1 TTL to 5 TTL
to 50M: 30 pF
to 125M: 15 pF
10 ms max.
pin 1 = H or open (output active at pin 3)
pin 1 = L (high impedance at pin 3)
Note
(1) Include: 25 ºC tolerance, operating temperature range, input voltage change, aging, load change, shock and vibration
DIMENSIONS in inches [millimeters]
CMOS
LOAD
CL (1)
max.
Note
(1)
Includes Stray and Probe Capacitance
max.
OH
DD
max.
IH ≥
DC
DD
OL
DD
max.
DD
Document Number: 35038
Revision: 24-Nov-10
For technical questions, contact: [email protected]
www.vishay.com
25
XO-543
Full Size Clock Oscillators TTL/HCMOS
Compatible
Vishay Dale
ORDERING INFORMATION
XO-543
B
R
MODEL
FREQUENCY STABILITY
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
B = 0.01 % (100 ppm)
E
40M
e2
OTR
ENABLE/DISABLE
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
blank = 0 °C to + 70 °C
R = - 40 °C to + 85 °C
blank = pin 1 open
E = disable to tri-state
standard
GLOBAL PART NUMBER
X
O
3
4
MODEL
C
T
E
D
N
FREQUENCY
STABILITY
OTR
ENABLE/
DISABLE
PACKAGE
CODE
A
4
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M28__XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
26
For technical questions, contact: [email protected]
Document Number: 35038
Revision: 24-Nov-10
XO-52
Vishay Dale
Half Size Clock Oscillator Enable/Disable
FEATURES
•
•
•
•
•
•
•
•
The XO-52 series oscillator is half size, has tri-state
enable/disable controlled function. The metal package with
pin 4 case ground acts as shielding to minimize EMI
radiation.
Size: 8 pin half size
Industry standard
Tri-state enable/disable
Wide frequency range
Low cost
Resistance weld package
5V
Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
Frequency stability (1)
SYMBOL
FO
CONDITION
all conditions
Operating temperature range
TOPR
-
Storage temperature range
Power supply voltage
Aging (first year)
TSTG
VDD
25 ºC ± 3 ºC
1.000 MHz to 23.999 MHz
24.000 MHz to 49.999 MHz
50.000 MHz to 69.999 MHz
70.000 MHz to 100.000 MHz
at 1/2 VDD
20 % VDD to 80 % VDD
80 % VDD to 20 % VDD
-
Supply current
IDD
Output symmetry
Rise time
Fall time
Sym
tr
tf
VOH
VOL
TTL load
Output voltage
Output load
HCMOS load
Start-up time
ts
Pin 1, tri-state function
VALUE
1.000 MHz to 100.000 MHz
± 25 ppm, ± 50 ppm, ± 100 ppm
0 ºC to 70 ºC
- 40 ºC to + 85 ºC (option)
- 55 ºC to + 125 ºC
5.0 V ± 10 %
± 5 ppm
20 mA max.
30 mA max.
40 mA max.
60 mA max.
40 %/60 % (45 %/55 % option)
10 ns max.
10 ns max.
90 % VDD min.
10 % VDD max.
1 TTL to 10 TTL
to 50M: 50 pF
to 70M: 30 pF
to 100M: 15 pF
10 ms max.
pin 1 = H or open (output active at pin 5)
pin 1 = L (high impedance at pin 5)
-
Note
(1) Include: 25 °C tolerance, operating temperature range, input voltage change, aging, load change, shock vibration
DIMENSIONS in inches [millimeters]
HCMOS TEST CIRCUIT
#1
MARKING
AREA
A
#4
0.508
[12.9] max.
+ 5.0 V
+ 3.3 V
0.300 ± 0.005
[7.62 ± 0.13]
#8
0.031 ± 0.003
[0.8 ± 0.1]
0.018 ± 0.003
[0.45 ± 0.1]
Note
INH
(1)
Includes Stray and Probe Capacitance Enable/Disable function
0.580 [12.9] max.
HCMOS OUTPUT WAVEFORM
Tr
Tf
VOH
0.268
[6.80] max.
ENABLE/DISABLE FUNCTION
INPUT (PIN 1) OUTPUT (PIN 5)
ENABLE
OPEN
ENABLE
VIH ≥ 2.2 VDC
PIN
#1
#4
#5
#8
CONNECTION
N.C.
GND
OUTPUT
VDD
90 % VDD
50 % VDD
VOL
10 % VDD
GND
T1
T0 = 1/Fo
Document Number: 35025
Revision: 24-Nov-10
CMOS Load
CL (1)
CL = 15 pF or 50 pF
(see individual
spec. sheet)
#5
#4
#8
#1
#5
0.300 ± 0.005
[7.62 ± 0.13]
0.220
[5.6] max.
Test Point
0.01 µF
V
For technical questions, contact: [email protected]
SYMMETRY =
T1
x 100 %
T0
www.vishay.com
27
XO-52
Half Size Clock Oscillator Enable/Disable
Vishay Dale
ORDERING INFORMATION
XO-52
B
R
MODEL
FREQUENCY STABILITY
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
B = 0.01 % (100 ppm)
E
40M
e2
OTR
ENABLE/DISABLE
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
blank = 0 °C to + 70 °C
R = - 40 °C to + 85 °C
blank = pin 1 open
E = disable to tri-state
standard
GLOBAL PART NUMBER
X
O
5
2
MODEL
C
T
E
L
N
FREQUENCY
STABILITY
OTR
ENABLE/
DISABLE
PACKAGE
CODE
A
4
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M2802XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
28
For technical questions, contact: [email protected]
Document Number: 35025
Revision: 24-Nov-10
XO-523
Vishay Dale
Half Size Clock Oscillator Enable/Disable
FEATURES
•
•
•
•
•
•
•
•
The XO-523 series oscillator is half size, has tri-state
enable/disable controlled function, and is with a 3.3 V power
supply voltage. The metal package with pin 4 case ground
acts as shielding to minimize EMI radiation.
Size: 8 pin half size
Industry standard
Tri-state enable/disable
Wide frequency range
Low cost
Resistance weld package
3.3 V
Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
SYMBOL
CONDITION
VALUE
FO
-
1.000 MHz to 100.000 MHz
all conditions
± 25 ppm, ± 50 ppm, ± 100 ppm
Frequency stability (1)
0 ºC to 70 ºC
Operating temperature range
TOPR
-
Storage temperature range
TSTG
-
- 55 ºC to + 125 ºC
Power supply voltage
VDD
-
3.3 V ± 10 %
Aging (first year)
Supply current
IDD
- 40 ºC to + 85 ºC (option)
25 ºC ± 3 ºC
± 5 ppm
1.000 MHz to 23.999 MHz
15 mA max.
24.000 MHz to 49.999 MHz
20 mA max.
50.000 MHz to 69.999 MHz
30 mA max.
70.000 MHz to 100.000 MHz
45 mA max.
Sym
at 1/2 VDD
40 %/60 % (45 %/55 % option)
Rise time
tr
20 % VDD to 80 % VDD
8 ns max.
Fall time
tf
80 % VDD to 20 % VDD
8 ns max.
VOH
-
90 % VDD min.
VOL
-
10 % VDD max.
TTL load
-
1 TTL to 5 TTL
Output symmetry
Output voltage
Output load
HCMOS load
Start-up time
ts
-
to 50M: 30 pF
-
to 125M: 15 pF
-
Pin 1, tri-state function
10 ms max.
pin 1 = H or open (output active at pin 5)
-
pin 1 = L (high impedance at pin 5)
Note
(1) Include: 25 °C tolerance, operating temperature range, input voltage change, aging, load change, shock vibration
DIMENSIONS in inches [millimeters]
HCMOS TEST CIRCUIT
#1
MARKING
AREA
A
#4
0.508
[12.9] max.
+ 5.0 V
+ 3.3 V
0.300 ± 0.005
[7.62 ± 0.13]
#8
0.220
[5.6] max.
0.018 ± 0.003
[0.45 ± 0.1]
Note
INH
(1)
Includes Stray and Probe Capacitance Enable/Disable function
0.580 [12.9] max.
HCMOS OUTPUT WAVEFORM
Tr
Tf
VOH
0.268
[6.80] max.
ENABLE/DISABLE FUNCTION
INPUT (PIN 1) OUTPUT (PIN 5)
ENABLE
OPEN
ENABLE
VIH ≥ 2.2 VDC
PIN
#1
#4
#5
#8
CONNECTION
N.C.
GND
OUTPUT
VDD
90 % VDD
50 % VDD
VOL
10 % VDD
GND
T1
T0 = 1/Fo
Document Number: 35044
Revision: 24-Nov-10
CMOS Load
CL (1)
CL = 15 pF or 50 pF
(see individual
spec. sheet)
#5
#4
#8
#1
#5
0.300 ± 0.005
[7.62 ± 0.13]
0.031 ± 0.003
[0.8 ± 0.1]
Test Point
0.01 µF
V
For technical questions, contact: [email protected]
SYMMETRY =
T1
x 100 %
T0
www.vishay.com
29
XO-523
Half Size Clock Oscillator Enable/Disable
Vishay Dale
ORDERING INFORMATION
XO-523
B
R
MODEL
FREQUENCY STABILITY
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
E
40M
e2
OTR
ENABLE/DISABLE
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
blank = 0 °C to + 70 °C
R = - 40 °C to + 85 °C
blank = pin 1 open
E = disable to tri-state
standard
GLOBAL PART NUMBER
X
O
3
2
MODEL
C
T
E
L
N
FREQUENCY
STABILITY
OTR
ENABLE/
DISABLE
PACKAGE
CODE
A
4
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M2801XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
30
For technical questions, contact: [email protected]
Document Number: 35044
Revision: 24-Nov-10
XOSM-52
Vishay Dale
Half Size Clock Oscillator Enable/Disable
FEATURES
• Size: 8 pin half size
• Industry standard
• Tri-state enable/disable
• Wide frequency range
The XOSM-52 series oscillator is half size, has tri-state
enable/disable controlled function. The metal package with
pin 4 case ground acts as shielding to minimize EMI
radiation.
• Low cost
• Resistance weld package
• 5V
• Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
SYMBOL
CONDITION
VALUE
FO
-
1.000 MHz to 100.000 MHz
all conditions
± 25 ppm, ± 50 ppm, ± 100 ppm
Frequency stability (1)
0 ºC to 70 ºC
Operating temperature range
TOPR
-
Storage temperature range
TSTG
-
- 55 ºC to + 125 ºC
Power supply voltage
VDD
-
5.0 V ± 10 %
Aging (first year)
Supply current
IDD
- 40 ºC to + 85 ºC (option)
25 ºC ± 3 ºC
± 5 ppm
1.000 MHz to 23.999 MHz
20 mA max.
24.000 MHz to 49.999 MHz
30 mA max.
50.000 MHz to 69.999 MHz
40 mA max.
70.000 MHz to 100.000 MHz
60 mA max.
Sym
at 1/2 VDD
40 %/60 % (45 %/55 % option)
Rise time
tr
20 % VDD to 80 % VDD
10 ns max.
Fall time
tf
80 % VDD to 20 % VDD
10 ns max.
VOH
-
90 % VDD min.
VOL
TTL load
-
10 % VDD max.
1 TTL to 10 TTL
to 50M: 50 pF
to 70M: 30 pF
to 100M: 15 pF
10 ms max.
-
pin 1 = H or open (output active at pin 5)
Output symmetry
Output voltage
Output load
HCMOS load
Start-up time
ts
Pin 1, tri-state function
Note
(1) Include: 25 °C tolerance, operating temperature range, input voltage change, aging, load change, shock vibration
DIMENSIONS in inches [millimeters]
STANDARD PIN ORIENTATION
0.508
[12.9] max.
0.300 ± 0.004
[7.62 ± 0.102]
1
8
0.306
[7.77]
max.
4
STD
5
0.512
[13.1] max.
- 85 PIN ORIENTATION
0.426 ± 0.004
[10.82 ± 0.102]
HCMOS TEST CIRCUIT
A
0.508
[12.9] max.
0.300 ± 0.004
[7.62 ± 0.102]
+ 5.0 V
+ 3.3 V
Note
0.018
[0.45]
Document Number: 35026
Revision: 24-Nov-10
0.070 [1.78] max.
ENABLE/DISABLE FUNCTION
INPUT (PIN 1) OUTPUT (PIN 5)
OPEN
ENABLE
VIH ≥ 2.2 VDC
ENABLE
PIN
#1
#4
#5
#8
CONNECTION
N.C
GND
OUTPUT
VDD
- 85
1
CMOS Load
CL (1)
#5
#4
#8
#1
CL = 15 pF or 50 pF
(see individual
spec. sheet)
5
4
(1)
0.300 ± 0.004
[7.62 ± 0.102]
0.508
[12.9] max.
Test Point
0.01 µF
V
8
0.512
[13.1] max.
Includes Stray and Probe Capacitance
0.300 ± 0.004
[7.62 ± 0.102]
0.508
[12.9] max.
0.018
[0.45]
For technical questions, contact: [email protected]
INH
Enable/Disable function
HCMOS OUTPUT WAVEFORM
Tr
Tf
VOH
90 %VDD
50 %VDD
VOL
10 %VDD
GND
T1
T0 = 1/Fo
SYMMETRY =
T1
x 100 %
T0
www.vishay.com
31
XOSM-52
Half Size Clock Oscillator Enable/Disable
Vishay Dale
ORDERING INFORMATION
XOSM-52
B
R
MODEL
FREQUENCY STABILITY
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
B = 0.01 % (100 ppm)
standard
E
40M
e2
OTR
ENABLE/DISABLE
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
blank = Standard
R = - 40 °C to + 85 °C
blank = pin 1 open
E = disable to tri-state
standard
GLOBAL PART NUMBER
X
O
5
M
MODEL
C
T
E
L
N
FREQUENCY
STABILITY
OTR
ENABLE/
DISABLE
PACKAGE
CODE
A
4
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M2802XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
32
For technical questions, contact: [email protected]
Document Number: 35026
Revision: 24-Nov-10
XOSM-57
Vishay Dale
Surface Mount Oscillator
FEATURES
•
•
•
•
•
•
•
•
The XOSM-57 series is an ultra miniature package clock
oscillator with dimensions 7.0 mm x 5.0 mm x 1.9 mm. It is
mainly used in portable PC and telecommunication devices
and equipment.
Size: 7.0 x 5.0 x 1.9 (mm)
Miniature package
Tri-state enable/disable
TTL/HCMOS compatible
Tape and reel
IR re-flow
5 V input voltage
Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
SYMBOL
CONDITION
VALUE
FO
-
1.500 MHz to 100.000 MHz
all conditions
± 25 ppm, ± 50 ppm, ± 100 ppm
Frequency stability (1)
0 ºC to 70 ºC
Operating temperature range
TOPR
-
Storage temperature range
TSTG
-
- 55 ºC to + 125 ºC
Power supply voltage
VDD
-
5.0 V ± 10 %
25 ºC ± 3 ºC
± 5 ppm
1.500 MHz to 20.000 MHz
20 mA max.
20.001 MHz to 50.000 MHz
35 mA max.
Aging (first year)
Supply current
IDD
Output symmetry
Sym
Rise/fall time
tr/tf
30.001 MHz to 100.000 MHz
45 mA max.
at 1/2 VDD
40 %/60 % (45 %/55 % option)
1.500 MHz to 67.000 MHz
10 ns
67.001 MHz to 100.000 MHz
3 ns
-
90 % VDD min.
VOH
Output voltage
VOL
Output load
Start-up time
- 40 ºC to + 85 ºC (option)
-
10 % VDD max.
1.500 MHz to 67.000 MHz
10 TTL or 50 pF max.
67.001 MHz to 100.000 MHz
15 pF max.
-
10 ms max.
ts
Pin 1, tri-state function
pin 1 = H or open (output active at pin 3)
-
pin 1 = L (high impedance at pin 3)
Note
(1) Include: 25 °C tolerance, operating temperature range, input voltage change, aging, load change, shock vibration
DIMENSIONS in inches [millimeters]
0.055 [1.40]
typ.
0.079
[2.0]
#4
#1
0.2 [5.08]
typ.
0.276 ± 0.008
[7.0 ± 0.2]
#3
0.197 ± 0.008
[5.0 ± 0.2]
0.075 [1.90]
max.
0.102 [2.60]
typ.
0.200
[5.08]
0.071
[1.8]
PIN
#1
#2
#3
#4
CONNECTION
TRI-STATE/NC
GND
OUTPUT
VDD
#2
0.047 [1.20]
typ.
0.165
[4.20]
Note
• A 0.01 μF bypass capacitor should be placed between VDD (pin 4) and GND (pin 2) to minimize power supply line noise
Document Number: 35028
Revision: 24-Nov-10
For technical questions, contact: [email protected]
www.vishay.com
33
XOSM-57
Surface Mount Oscillator
Vishay Dale
ORDERING INFORMATION
XOSM-57
B
R
MODEL
FREQUENCY STABILITY
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
B = 0.01 % (100 ppm)
standard
E
50M
e4
OTR
ENABLE/DISABLE
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
blank = standard
R = - 40 °C to + 85 °C
E = disable to tri-state
standard
GLOBAL PART NUMBER
X
O
5
7
MODEL
C
T
E
C
N
FREQUENCY
STABILITY
OTR
ENABLE/
DISABLE
PACKAGE
CODE
A
5
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M2804XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
34
For technical questions, contact: [email protected]
Document Number: 35028
Revision: 24-Nov-10
XOSM-573
Vishay Dale
Surface Mount Oscillator
FEATURES
•
•
•
•
•
•
•
•
The XOSM-573 series is an ultra miniature package clock
oscillator with dimensions 7.0 mm x 5.0 mm x 1.9 mm. It is
mainly used in portable PC and telecommunication devices
and equipment
Size: 7.0 x 5.0 x 1.9 (mm)
Miniature package
Tri-state enable/disable
TTL/HCMOS compatible
Tape and reel
IR re-flow
3.3 V input voltage
Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
SYMBOL
CONDITION
VALUE
FO
-
1.500 MHz to 100.000 MHz
all conditions
± 25 ppm, ± 50 ppm, ± 100 ppm
Frequency stability (1)
0 ºC to 70 ºC
Operating temperature range
TOPR
-
Storage temperature range
TSTG
-
- 55 ºC to + 125 ºC
Power supply voltage
VDD
-
3.3 V ± 10 %
Aging (first year)
Supply current
IDD
- 40 ºC to + 85 ºC (option)
25 °C ± 3 °C
± 5 ppm
1.500 MHz to 20.000 MHz
10 mA max.
20.001 MHz to 50.000 MHz
20 mA max.
50.001 MHz to 67.000 MHz
30 mA max.
67.001 MHz to 100.000 MHz
55 mA max.
Output symmetry
Sym
at ½ VDD
40 %/60 % (45 %/55 % option)
1.500 MHz to 50.000 MHz
6 ns
Rise/fall time
tr/tf
50.001 MHz to 80.000 MHz
4 ns
Output voltage
80.001 MHz to 100.000 MHz
2 ns
VOH
-
90 % VDD min.
VOL
-
10 % VDD max.
-
2 TTL or 15 pF
Output load
Start-up time
ts
-
Pin 1, tri-state function
10 ms max.
pin 1 = H or open (output active at pin 3)
-
pin 1 = L (high impedance at pin 3)
Note
(1) Include: 25 ºC tolerance, operating temperature range, input voltage change, aging, load change, shock and vibration
DIMENSIONS in inches [millimeters]
0.055 [1.40]
typ.
0.079
[2.0]
#4
#1
0.2 [5.08]
typ.
0.276 ± 0.008
[7.0 ± 0.2]
#3
0.197 ± 0.008
[5.0 ± 0.2]
0.075 [1.90]
max.
0.102 [2.60]
typ.
0.200
[5.08]
0.071
[1.8]
PIN
#1
#2
#3
#4
CONNECTION
TRI-STATE/NC
GND
OUTPUT
VDD
#2
0.047 [1.20]
typ.
0.165
[4.20]
Note
• A 0.01 μF bypass capacitor should be placed between VDD (pin 4) and GND (pin 2) to minimize power supply line noise
Document Number: 35051
Revision: 24-Nov-10
For technical questions, contact: [email protected]
www.vishay.com
35
XOSM-573
Surface Mount Oscillator
Vishay Dale
ORDERING INFORMATION
XOSM-573
B
R
MODEL
FREQUENCY STABILITY
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
B = 0.01 % (100 ppm)
standard
E
50M
e4
OTR
ENABLE/DISABLE
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
blank = standard
R = - 40 °C to + 85 °C
E = disable to tri-state
standard
GLOBAL PART NUMBER
X
O
3
7
MODEL
C
T
E
C
N
FREQUENCY
STABILITY
OTR
ENABLE/
DISABLE
PACKAGE
CODE
A
5
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M2809XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
36
For technical questions, contact: [email protected]
Document Number: 35051
Revision: 24-Nov-10
XOSM-572
Vishay Dale
Surface Mount Oscillator
FEATURES
• Size: 7.0 x 5.0 x 1.9 (mm)
• Miniature package
• Tri-state enable/disable
• HCMOS compatible
The XOSM-572 series is an ultra miniature package clock
oscillator with dimensions 7.0 mm x 5.0 mm x 1.9 mm. It is
mainly used in portable PC and telecommunication devices
and equipment.
• Tape and reel
• IR re-flow
• 2.5 V input voltage
• Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
SYMBOL
CONDITION
VALUE
FO
-
1.000 MHz to 100.000 MHz
all conditions
± 25 ppm, ± 50 ppm, ± 100 ppm
Frequency stability (1)
0 ºC to 70 ºC
Operating temperature range
TOPR
-
Storage temperature range
TSTG
-
- 55 ºC to + 125 ºC
Power supply voltage
VDD
-
2.5 V ± 10 %
25 ºC ± 3 ºC
± 5 ppm
IDD
1.000 MHz to 100.000 MHz
30 mA max.
Output symmetry
Sym
at 1/2 VDD
40 %/60 % (45 %/55 % option)
Rise/fall time
tr/tf
1.000 MHz to 100.000 MHz
6 ns max.
VOH
-
90 % VDD min.
VOL
-
10 % VDD max.
-
10 TTL or 15 pF
-
10 ms max.
Aging (first year)
Supply current
Output voltage
Output load
Start-up time
ts
Pin 1, tri-state function
- 40 ºC to + 85 ºC (option)
pin 1 = H or open (output active at pin 3)
-
pin 1 = L (high impedance at pin 3)
Note
(1) Include: 25 °C tolerance, operating temperature range, input voltage change, aging, load change, shock vibration
DIMENSIONS in inches [millimeters]
0.055 [1.40]
typ.
0.079
[2.0]
#4
#1
0.2 [5.08]
typ.
0.276 ± 0.008
[7.0 ± 0.2]
#3
0.197 ± 0.008
[5.0 ± 0.2]
0.075 [1.90]
max.
0.102 [2.60]
typ.
0.200
[5.08]
0.071
[1.8]
PIN
#1
#2
#3
#4
CONNECTION
TRI-STATE/NC
GND
OUTPUT
VDD
#2
0.047 [1.20]
typ.
0.165
[4.20]
Note
• A 0.01 μF bypass capacitor should be placed between VDD (pin 4) and GND (pin 2) to minimize power supply line noise
Document Number: 35062
Revision: 24-Nov-10
For technical questions, contact: [email protected]
www.vishay.com
37
XOSM-572
Surface Mount Oscillator
Vishay Dale
ORDERING INFORMATION
XOSM-572
B
R
MODEL
FREQUENCY STABILITY
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
B = 0.01 % (100 ppm)
standard
E
50M
e4
OTR
ENABLE/DISABLE
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
blank = Standard
R = - 40 °C to + 85 °C
E = disable to tri-state
standard
GLOBAL PART NUMBER
X
O
2
7
MODEL
C
T
E
C
N
FREQUENCY
STABILITY
OTR
ENABLE/
DISABLE
PACKAGE
CODE
A
5
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M2805XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
38
For technical questions, contact: [email protected]
Document Number: 35062
Revision: 24-Nov-10
XOSM-571
Vishay Dale
Surface Mount Oscillator
FEATURES
• Size: 7.0 x 5.0 x 1.9 (mm)
• Miniature package
• Tri-state enable/disable
• HCMOS compatible
The XOSM-571 series is an ultra miniature package clock
oscillator with dimensions 7.0 mm x 5.0 mm x 1.9 mm. It is
mainly used in portable PC and telecommunication devices
and equipment.
• Tape and reel
• IR re-flow
• 1.8 V input voltage
• Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
SYMBOL
CONDITION
VALUE
FO
-
1.000 MHz to 70.000 MHz
all conditions
± 25 ppm, ± 50 ppm, ± 100 ppm
Frequency stability (1)
0 ºC to 70 ºC
Operating temperature range
TOPR
-
Storage temperature range
TSTG
-
- 55 ºC to + 125 ºC
Power supply voltage
VDD
-
1.8 V ± 10 %
25 ºC ± 3 ºC
± 5 ppm
IDD
1.000 MHz to 70.000 MHz
20 mA max.
Sym
at 1/2 VDD
40 %/60 % (45 %/55 % option)
1.000 MHz to 35.328 MHz
10 ns
Aging (first year)
Supply current
Output symmetry
tr/tf
Rise/fall time
Output voltage
35.329 MHz to 70.000 MHz
4 ns
VOH
-
90 % VDD min.
VOL
-
10 % VDD max.
-
10 TTL or 30 pF
Output load
Start-up time
- 40 ºC to + 85 ºC (option)
ts
-
Pin 1, tri-state function
10 ms max.
pin 1 = H or open (output active at pin 3)
-
pin 1 = L (high impedance at pin 3)
Note
(1) Include: 25 °C tolerance, operating temperature range, input voltage change, aging, load change, shock vibration
DIMENSIONS in inches [millimeters]
0.055 [1.40]
typ.
0.079
[2.0]
#4
#1
0.2 [5.08]
typ.
0.276 ± 0.008
[7.0 ± 0.2]
#3
0.197 ± 0.008
[5.0 ± 0.2]
0.075 [1.90]
max.
0.102 [2.60]
typ.
0.200
[5.08]
0.071
[1.8]
PIN
#1
#2
#3
#4
CONNECTION
TRI-STATE/NC
GND
OUTPUT
VDD
#2
0.047 [1.20]
typ.
0.165
[4.20]
Note
• A 0.01 μF bypass capacitor should be placed between VDD (pin 4) and GND (pin 2) to minimize power supply line noise
Document Number: 35061
Revision: 24-Nov-10
For technical questions, contact: [email protected]
www.vishay.com
39
XOSM-571
Surface Mount Oscillator
Vishay Dale
ORDERING INFORMATION
XOSM-571
B
R
MODEL
FREQUENCY STABILITY
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
B = 0.01 % (100 ppm)
standard
E
50M
e4
OTR
ENABLE/DISABLE
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
blank = standard
R = - 40 °C to + 85 °C
E = disable to tri-state
standard
GLOBAL PART NUMBER
X
O
1
7
MODEL
C
T
E
C
N
FREQUENCY
STABILITY
OTR
ENABLE/
DISABLE
PACKAGE
CODE
A
5
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M28__XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
40
For technical questions, contact: [email protected]
Document Number: 35061
Revision: 24-Nov-10
XOSM-533
Vishay Dale
Surface Mount Oscillator
FEATURES
•
•
•
•
•
•
•
•
The XOSM-533 series is an ultra miniature package clock
oscillator with dimensions 5.0 mm x 3.2 mm x 1.3 mm. It is
mainly used in portable PC and telecommunication devices
and equipment.
Size: 5.0 x 3.2 x 1.3 (mm)
Miniature package
Tri-state enable/disable
HCMOS compatible
Tape and reel
IR re-flow
3.3 V input voltage
Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
SYMBOL
CONDITION
VALUE
FO
-
1.544 MHz to 100.000 MHz
all conditions
± 25 ppm, ± 50 ppm, ± 100 ppm
Frequency stability (1)
0 ºC to 70 ºC
Operating temperature range
TOPR
-
Storage temperature range
TSTG
-
- 55 ºC to + 125 ºC
Power supply voltage
VDD
-
3.3 V ± 10 %
Aging (first year)
Supply current
IDD
- 40 ºC to + 85 ºC (option)
25 ºC ± 3 ºC
± 5 ppm
1.544 MHz to 9.999 MHz
8 mA max.
10.000 MHz to 34.999 MHz
10 mA max.
35.000 MHz to 49.999 MHz
25 mA max.
50.000 MHz to 100.000 MHz
35 mA max.
Sym
at 1/2 VDD
40 %/60 % (45 %/55 % option)
Rise time
tr
10 % VDD to 90 % VDD
7 ns max.
Fall time
tf
90 % VDD to 10 % VDD
7 ns max.
VOH
-
90 % VDD min.
Output symmetry
Output voltage
VOL
-
10 % VDD max.
Output load
HCMOS load
-
30 pF max. (15 pF typ.)
Start-up time
ts
-
Pin 1, tri-state function
10 ms max.
pin 1 = H or open (output active at pin 3)
-
pin 1 = L (high impedance at pin 3)
Note
(1) Include: 25 °C tolerance, operating temperature range, input voltage change, aging, load change, shock vibration
DIMENSIONS in inches [millimeters]
0.047 ± 0.003
[1.20 ± 0.1]
0.047
[1.2]
#4
#1
0.1 ± 0.003
[2.54 ± 0.1]
0.197 ± 0.008
[5.0 ± 0.2]
#3
0.130 ± 0.008
[3.3 ± 0.2]
0.051 [1.3]
max.
0.1
[2.54]
0.055
[1.4]
PIN
#1
#2
#3
#4
CONNECTION
TRI-STATE/NC
GND
OUTPUT
VDD
#2
0.047
[1.2]
0.087
[2.2]
Note
• A 0.01 μF bypass capacitor should be placed between VDD (pin 4) and GND (pin 2) to minimize power supply line noise
Document Number: 35060
Revision: 24-Nov-10
For technical questions, contact: [email protected]
www.vishay.com
41
XOSM-533
Surface Mount Oscillator
Vishay Dale
ORDERING INFORMATION
XOSM-533
B
R
MODEL
FREQUENCY STABILITY
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
B = 0.01 % (100 ppm)
standard
E
50M
e2
OTR
ENABLE/DISABLE
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
blank = standard
R = - 40 °C to + 85 °C
E = disable to tri-state
standard
GLOBAL PART NUMBER
X
O
6
3
MODEL
C
T
E
A
N
FREQUENCY
STABILITY
OTR
ENABLE/
DISABLE
PACKAGE
CODE
A
5
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M2807XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
42
For technical questions, contact: [email protected]
Document Number: 35060
Revision: 24-Nov-10
XOSM-532
Vishay Dale
Surface Mount Oscillator
FEATURES
•
•
•
•
•
•
•
•
The XOSM-532 series is an ultra miniature package clock
oscillator with dimensions 5.0 mm x 3.2 mm x 1.3 mm. It is
mainly used in portable PC and telecommunication devices
and equipment.
Size: 5.0 x 3.2 x 1.3 (mm)
Miniature package
Tri-state enable/disable
HCMOS compatible
Tape and reel
IR re-flow
2.5 V input voltage
Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
SYMBOL
CONDITION
VALUE
FO
-
1.544 MHz to 100.000 MHz
all conditions
± 25 ppm, ± 50 ppm, ± 100 ppm
Frequency stability (1)
0 ºC to 70 ºC
Operating temperature range
TOPR
-
Storage temperature range
TSTG
-
- 55 ºC to + 125 ºC
Power supply voltage
VDD
-
2.5 V ± 10 %
Aging (first year)
Supply current
IDD
- 40 ºC to + 85 ºC (option)
25 ºC ± 3 ºC
± 5 ppm
1.544 MHz to 9.999 MHz
7 mA max.
10.000 MHz to 34.999 MHz
8 mA max.
35.000 MHz to 49.999 MHz
20 mA max.
50.000 MHz to 100.000 MHz
30 mA max.
Sym
at 1/2 VDD
40 %/60 % (45 %/55 % option)
Rise time
tr
10 % VDD to 90 % VDD
6 ns max.
Fall time
tf
90 % VDD to 10 % VDD
6 ns max.
VOH
-
90 % VDD min.
Output symmetry
Output voltage
VOL
-
10 % VDD max.
Output load
HCMOS load
-
30 pF max. (15 pF typ.)
Start-up time
ts
-
Pin 1, tri-state function
10 ms max.
pin 1 = H or open (output active at pin 3)
-
pin 1 = L (high impedance at pin 3)
Note
(1) Include: 25 °C tolerance, operating temperature range, input voltage change, aging, load change, shock vibration
DIMENSIONS in inches [millimeters]
0.047 ± 0.003
[1.20 ± 0.1]
0.047
[1.2]
#4
#1
0.1 ± 0.003
[2.54 ± 0.1]
0.197 ± 0.008
[5.0 ± 0.2]
#3
0.130 ± 0.008
[3.3 ± 0.2]
0.051 [1.3]
max.
0.1
[2.54]
0.055
[1.4]
PIN
#1
#2
#3
#4
CONNECTION
TRI-STATE/NC
GND
OUTPUT
VDD
#2
0.047
[1.2]
0.087
[2.2]
Note
• A 0.01 μF bypass capacitor should be placed between VDD (pin 4) and GND (pin 2) to minimize power supply line noise
Document Number: 35058
Revision: 24-Nov-10
For technical questions, contact: [email protected]
www.vishay.com
43
XOSM-532
Surface Mount Oscillator
Vishay Dale
ORDERING INFORMATION
XOSM-532
B
R
MODEL
FREQUENCY STABILITY
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
B = 0.01 % (100 ppm)
standard
E
50M
e4
OTR
ENABLE/DISABLE
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
blank = standard
R = - 40 °C to + 85 °C
E = disable to tri-state
standard
GLOBAL PART NUMBER
X
O
6
2
MODEL
C
T
E
A
N
FREQUENCY
STABILITY
OTR
ENABLE/
DISABLE
PACKAGE
CODE
A
5
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M2808XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
44
For technical questions, contact: [email protected]
Document Number: 35058
Revision: 24-Nov-10
XOSM-531
Vishay Dale
Surface Mount Oscillator
FEATURES
•
•
•
•
•
•
•
•
The XOSM-531 series is an ultra miniature package clock
oscillator with dimensions 5.0 mm x 3.2 mm x 1.3 mm. It is
mainly used in portable PC and telecommunication devices
and equipment.
Size: 5.0 x 3.2 x 1.3 (mm)
Miniature package
Tri-state enable/disable
HCMOS compatible
Tape and reel
IR re-flow
1.8 V input voltage
Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Frequency range
SYMBOL
CONDITION
VALUE
FO
-
1.544 MHz to 100.000 MHz
all conditions
± 25 ppm, ± 50 ppm, ± 100 ppm
Frequency stability (1)
0 ºC to 70 ºC
Operating temperature range
TOPR
-
Storage temperature range
TSTG
-
- 55 ºC to + 125 ºC
Power supply voltage
VDD
-
1.8 V ± 10 %
Aging (first year)
Supply current
IDD
- 40 ºC to + 85 ºC (option)
25 ºC ± 3 ºC
± 5 ppm
1.544 MHz to 9.999 MHz
6 mA max.
10.000 MHz to 34.999 MHz
7 mA max.
35.000 MHz to 49.999 MHz
15 mA max.
50.000 MHz to 100.000 MHz
25 mA max.
Sym
at 1/2 VDD
40 %/60 % (45 %/55 % option)
Rise time
tr
10 % VDD to 90 % VDD
5 ns max.
Fall time
tf
90 % VDD to 10 % VDD
5 ns max.
VOH
-
90 % VDD min.
Output symmetry
Output voltage
VOL
-
10 % VDD max.
Output load
HCMOS load
-
30 pF max. (15 pF typ.)
Start-up time
ts
-
Pin 1, tri-state function
10 ms max.
pin 1 = H or open (output active at pin 3)
-
pin 1 = L (high impedance at pin 3)
Note
(1) Include: 25 °C tolerance, operating temperature range, input voltage change, aging, load change, shock vibration
DIMENSIONS in inches [millimeters]
0.047 ± 0.003
[1.20 ± 0.1]
0.047
[1.2]
#4
#1
0.1 ± 0.003
[2.54 ± 0.1]
0.197 ± 0.008
[5.0 ± 0.2]
#3
0.130 ± 0.008
[3.3 ± 0.2]
0.051 [1.3]
max.
0.1
[2.54]
0.055
[1.4]
PIN
#1
#2
#3
#4
CONNECTION
TRI-STATE/NC
GND
OUTPUT
VDD
#2
0.047
[1.2]
0.087
[2.2]
Note
• A 0.01 μF bypass capacitor should be placed between VDD (pin 4) and GND (pin 2) to minimize power supply line noise
Document Number: 35059
Revision: 24-Nov-10
For technical questions, contact: [email protected]
www.vishay.com
45
XOSM-531
Surface Mount Oscillator
Vishay Dale
ORDERING INFORMATION
XOSM-531
B
R
MODEL
FREQUENCY STABILITY
AA = 0.0025 % (25 ppm)
A = 0.005 % (50 ppm)
B = 0.01 % (100 ppm)
E
50M
e4
OTR
ENABLE/DISABLE
FREQUENCY/MHz
JEDEC LEAD (Pb)-FREE
blank = standard
R = - 40 °C to + 85 °C
E = disable to tri-state
standard
GLOBAL PART NUMBER
X
O
6
1
MODEL
C
T
E
A
N
FREQUENCY
STABILITY
OTR
ENABLE/
DISABLE
PACKAGE
CODE
A
5
OPTIONS
0
M
FREQUENCY
GLOBAL PART NUMBERING
X
O
5
2
MODEL NUMBER
XO53 = XO-53
XO54 = XO-54
XO34 = XO-543
XO52 = XO-52
XO32 = XO-523
XO5M = XOSM-52
XO63 = XOSM-533
XO62 = XOSM-532
XO61 = XOSM-531
XO57 = XOSM-57
XO37 = XOSM-573
XO27 = XOSM-572
XO17 = XOSM-571
XO55 = XOSM-55
XO35 = XOSM-553
C
T
E
L
FREQUENCY
STABILITY
OPERATING
TEMPERATURE
(OTR)
ENABLE/
DISABLE
PACKAGE
CODE
T = 0 °C to
+ 70 °C
R = - 40 °C to
+ 85 °C
F = pin 1
open
E = disable
to tristate
Tape and reel
H = RF7
C = 0.01 %
(100 ppm)
D = 0.005 %
(50 ppm)
E = 0.0025 %
(25 ppm)
Bulk
A = B04
(XO63, XO62,
XO61)
C = D06
(XO57, XO37,
XO27, XO17)
D = D07
(XO53, XO54,
XO34, XO55,
XO35)
L = D08
(XO52, XO32,
XO5M)
N
A
4
0
M
OPTION
FREQUENCY
NA = no
additional
options
60 = 45/55
symmetry
4M = 4 MHz
40M = 40 MHz
100M =
100 MHz
12M288 =
12.288 MHz
Contact
factory for
all other
options
M is used as
decimal place
holder in
frequency
Example: XO52CTELNA40M
PART MARKING
Line 1:
M28__XXXXX (part number)
Line 2:
XX.XXXXM (frequency)
Line 3:
yywwvv (date/factory code)
www.vishay.com
46
For technical questions, contact: [email protected]
Document Number: 35059
Revision: 24-Nov-10
Contents
Reference
Information
Packaging Specifications ......
48
Tape and Reel Specifications
49
Packaging Methods...............
50
Environmental and
Mechanical Specifications.....
51
Test Circuits ..........................
51
Soldering Profile....................
52
Cross Reference ...................
53
Packaging Specifications
Vishay Dale
Tubes
PACKAGING SPECIFICATIONS in inches (millimeters)
Style A
B
A
Antistatic
G
F
C
L
D
E
Style B
B
A
Antistatic
C
E
L
D
STYLE
A
B
C
D
E
F
G
L
QUANTITY/
TUBE
XO-53
A
0.031
[0.8]
0.433
[11.0]
0.622
[15.8]
0.177
[4.5]
0.531
[13.5]
0.339
[8.6]
0.087
[2.2]
20.08
[510.0]
25
XO-54
A
0.031
[0.8]
0.433
[11.0]
0.622
[15.8]
0.177
[4.5]
0.531
[13.5]
0.339
[8.6]
0.087
[2.2]
20.08
[510.0]
25
XO-543
A
0.031
[0.8]
0.433
[11.0]
0.622
[15.8]
0.177
[4.5]
0.531
[13.5]
0.339
[8.6]
0.087
[2.2]
20.08
[510.0]
25
XO-52
A
0.031
[0.8]
0.433
[11.0]
0.622
[15.8]
0.177
[4.5]
0.531
[13.5]
0.339
[8.6]
0.087
[2.2]
20.08
[510.0]
40
XO-523
A
0.031
[0.8]
0.433
[11.0]
0.622
[15.8]
0.177
[4.5]
0.531
[13.5]
0.339
[8.6]
0.087
[2.2]
20.08
[510.0]
40
XOSM-52
A
0.031
[0.8]
0.433
[11.0]
0.622
[15.8]
0.177
[4.5]
0.531
[13.5]
0.339
[8.6]
0.087
[2.2]
20.08
[510.0]
40
XOSM-57
B
0.024
[0.6]
0.26
[6.6]
0.094
[2.4]
0.098
[2.5]
0.079
[2.0]
_
_
15.16
[385.0]
50
XOSM-573
B
0.024
[0.6]
0.26
[6.6]
0.094
[2.4]
0.098
[2.5]
0.079
[2.0]
_
_
15.16
[385.0]
50
MODEL
www.vishay.com
48
For technical questions, contact: [email protected]
Document Number: 35029
Revision: 06-Dec-10
Tape and Reel Specifications
Vishay Dale
Surface Mount Tape and Reel
TAPE AND REEL SPECIFICATIONS in inches (millimeters)
TAPE SPECIFICATIONS
MODEL
A
B
C
D
E
F
QUANTITY/
REEL
XT49M
Ø 0.059 (1.50)
0.157 (4.0)
0.472 (12.0)
0.453 (11.5)
0.945 (24.0)
0.171 (4.35)
1000
XT46C
Ø 0.059 (1.50)
0.157 (4.0)
0.315 (8.0)
0.295 (7.5)
0.630 (16.0)
0.059 (1.5)
1000
XT36C
Ø 0.059 (1.50)
0.157 (4.0)
0.315 (8.0)
0.295 (7.5)
0.630 (16.0)
0.079 (2.0)
1000
XOSM-57, XOSM-573,
XOSM-572, XOSM-571
Ø 0.059 (1.50)
0.157 (4.0)
0.315 (8.0)
0.295 (7.5)
0.630 (16.0)
0.079 (2.0)
1000
XOSM-533,
XOSM-532, XOSM-531
Ø 0.059 (1.50)
0.157 (4.0)
0.315 (8.0)
0.217 (5.5)
0.472 (12.0)
0.059 (1.5)
1000
MODEL
G
H
I
J
K
L
M
XT49M
0.098 (2.5)
Ø 0.531 (13.5)
0.850 (21.6)
3.917 (99.5)
12.99 (330)
0.945 (24.0)
0.091 (2.3)
XT46C
0.091 (2.3)
Ø 0.531 (13.5)
0.850 (21.6)
2.362 (60.0)
7.008 (178)
0.630 (16.0)
0.056 (1.4)
XT36C
0.098 (2.5)
Ø 0.531 (13.5)
0.850 (21.6)
2.362 (60.0)
7.008 (178)
0.689 (17.5)
0.056 (1.4)
XOSM-57, XOSM-573,
XOSM-572, XOSM-571
0.098 (2.5)
Ø 0.531 (13.5)
0.850 (21.6)
2.362 (60.0)
7.008 (178)
0.689 (17.5)
0.056 (1.4)
XOSM-533,
XOSM-532, XOSM-531
0.098 (2.5)
Ø 0.531 (13.5)
0.850 (21.6)
2.362 (60.0)
7.008 (178)
0.531 (13.5)
0.056 (1.4)
REEL SPECIFICATIONS
Document Number: 35030
Revision: 25-Jan-06
For technical questions, contact: [email protected]
www.vishay.com
49
Packaging Methods
Vishay Dale
Crystals and Oscillators Packaging Methods
TAPE AND REEL in inches [millimeters]
MODEL
PACKAGE SAP REEL
CODE
CODE SIZE
CARRIER
TAPE
WIDTH
COMPONENT
PITCH
MINIMUM
MINIMUM
ORDER PACKAGE SAP
ORDER
ORDER
ORDER
MULTIPLE
CODE
CODE
MULTIPLE
QUANTITY
QUANTITY
XT49S
-
-
-
-
-
-
-
B04
A
3000
100
XT49M
RF7
H
13
0.087 [2.2]
0.531 [13.5]
3000
1000
B04
A
3000
100
XT36C
RF7
H
7
0.630 [16.0]
0.315 [8.0]
1000
1000
B04
A
400
100
XT46C
RF7
H
7
0.087 [2.2]
0.531 [13.5]
1000
1000
B04
A
300
100
XO-53
-
-
-
-
-
-
-
D07
D
500
25
XO-54
-
-
-
-
-
-
-
D07
D
500
25
XO-543
-
-
-
-
-
-
-
D07
D
500
25
XO-52
-
-
-
-
-
-
-
D08
L
520
40
XO-523
-
-
-
-
-
-
-
D08
L
520
40
XOSM-52
-
-
-
-
-
-
-
D08
L
520
40
XOSM-57
RF7
H
7
0.630 [16.0]
0.315 [8.0]
1000
1000
D06
C
500
50
XOSM-573
RF7
H
7
0.630 [16.0]
0.315 [8.0]
1000
1000
D06
C
500
50
XOSM-572
RF7
H
7
0.630 [16.0]
0.315 [8.0]
1000
1000
D06
C
500
50
XOSM-571
RF7
H
7
0.630 [16.0]
0.315 [8.0]
1000
1000
D06
C
500
50
XOSM-533
RF7
H
7
0.472 [12.0]
0.315 [8.0]
1000
1000
B04
A
1000
100
XOSM-532
RF7
H
7
0.472 [12.0]
0.315 [8.0]
1000
1000
B04
A
1000
100
XOSM-531
RF7
H
7
0.472 [12.0]
0.315 [8.0]
1000
1000
B04
A
1000
100
www.vishay.com
50
For technical questions, contact: [email protected]
Document Number: 35057
Revision: 29-Apr-10
Specifications and Test Circuits
Vishay Dale
Environmental and Mechanical Specifications
ENVIRONMENTAL AND MECHANICAL SPECIFICATIONS
DESCRIPTION
LIMITS/CONDITIONS
TEST PROCEDURES
Thermal Cycle
- 55 °C, + 85 °C, 5 cycles
MIL-STD-202, Method 107, Condition A
Gross Leak test
All units 100 % leak tested
MIL-STD-202, Method 112, Condition D
Fine Leak
Mass spectrometer leak rate less than 2 x 10-8 Atm. cc/s of helium
MIL-STD-202, Method, Condition C
Moisture Resistance
95 % RH, + 25° to + 65 °C, 10 cycles
MIL-STD-202, Method 106
Shock
1000 g, 0.35 ms
MIL-STD-202, Method 213, Condition I
Vibration
10 Hz to 55 Hz, 0.06" D.A., 55 - 2000 Hz, 20 g
MIL-STD-202, Method 204, Condition D
Solderability
Minimum 95 % coverage
MIL-STD-202, Method 208
Resistance to Solvents
Isopropyl alcohol, terpene and monethanolamine solutions
MIL-STD-202, Method 215
TEST CIRCUITS
TTL
Test Point
TTL Load
A
RL = 390 Ω
for 10 TTL
+ 5.0 V/3.3 V
0.01 µF
V
VCC
Output
CL = 15 pF
NC/OE
GND
HCMOS
Test Point
HCMOS Load
A
+ 5.0 V/3.3 V
V
Document Number: 35032
Revision: 03-Mar-05
0.01 µF
VCC
Output
NC/OE
GND
For technical questions, contact: [email protected]
CL = 50 pF
or 15 pF
www.vishay.com
51
Soldering Profile
Vishay Dale
Soldering Profiles
RECOMMENDED PROFILES FOR SOLDER REFLOW
Infrared Reflow
10 s max.
245 °C
200
1 °C/s to 5 °C/s
1 °C/s to 5 °C/s
Temperature
(°C)
100
1 °C to 9 °C/s
Preliminary Heating
0
60 s
200 s
Time
Vapor Phase Reflow
50 s
215 °C
200
Temperature
(°C)
1 °C/s to 5 °C/s
1 °C/s to 9 °C/s
100
20 s to 100 s
0
Time
www.vishay.com
52
For technical questions, contact: [email protected]
Document Number: 35033
Revision: 25-Jan-06
Document Number: 35034
Revision: 06-Dec-10
For technical questions, contact: [email protected]
—
—
ACO
ACOA
—
—
ASLA
ASVA
—
—
ASFLP
ASFL2
ASFL3
XO-53B
XO-53BE
XO-54B
XO-54BE
XO-543B
XO-543BE
XOSM-57BE
XOSM-573BE
XOSM-572
XOSM-571
XOSM-533
XOSM-532
XOSM-531
—
—
ECX-64
—
—
MXO45HS ECS-2100
—
ATS-SM
—
—
ATS
ECS
EC1100HS
—
EC2SM
—
ECUM
EC2
ECLIPTEK
—
—
FXO-61F2
K53-1C
K53-2C
K50-3C1E
K50-HC 1 CS E
—
—
KHO-HC 1CSE
KXO-HC 1CS
—
KXO-01-1
—
—
EC1300TS
EC1300
EC1100TS
EC1100
—
—
EC1300HSTS
EC1300HS
ECS-3951C EC2500TS
—
—
ECS 1000E
ECS 400A
—
ECS 100A
—
—
636M
636N
636L
CB1V8
CB2V5
ECS-3518
ECS-3525
ECS-3963
ECS-5718
ECS-5725
EC3900TS
EC3700TS
EC3600TS
EC2900TS
EC2700TS
CB3LV-2C ECS-3953C EC2600TS
CB3-2C
—
—
—
—
MXO45T
MXO45
—
—
KHO-HC1CSE MXO45HST ECS-2200 EC100HSTS
KHO-HC1CS
—
—
KSX-36
—
—
CTS
—
—
—
—
—
—
—
—
—
—
MHO+13FAD
MTO13EAD
MTO13FAD
—
—
MH13EAD
MH13FAD
PX
ATSM-49
PP
UM-1
ATS-49
M-TRON
F510L
F540L
F530L
F4500
F4400
F4100
F3345 or F3355
—
—
—
—
M2034
M2180
M2250
M213TAN
M113TAN
—
—
F5C-2 or F3000 MHO+13EAD
F5C
F100HT
SG51 (1)
—
F1100E
—
—
H5C-2 or F3020
—
—
HC49SD
FM
UM1
HC49S
FOX
—
—
—
SG531 (1)
—
—
—
FA368
—
—
EPSON
—
—
—
—
—
—
SM7700H
P1100-3SV
P1100-HCV
P1100-3SV
P1100-HC
—
—
SQ3300V
SQ2200V
SQ3300
SQ2200
—
SM42
SM12H
UM1
LP49
—
MP35L
—
—
MP35
RXD
—
49SMLB
NKS6
UM1
49S
SARONIX
—
—
COM23
CO418
—
CO4310
CO4910
—
—
CO15100
CO6100
—
CO1100
—
—
NTT 040/050/070 C
NCT 040/050/070 C
—
—
—
—
—
—
—
—
—
—
—
HSCR2 or RC2
—
S1634
S1633
S1612
S1614
S1703C
S1700C or 1750C
—
—
NTH 030/060/080 C
HSC2 or THSC2 NCH 030/060/080 C
—
T2
—
—
CO19100 NNSCR2 or HRC2 NTH 039/069/089 C
CO12100 HHSC2 or HTHSC2 NCH 039/069/089 C
H180A
AS-SMD
—
—
AS
PLETRONICS RALTRON
—
—
G3
—
—
VF3
VF1 / VF5
—
—
VF140T
VF140
VF150T
VF150
—
—
VF70T
VF70
—
VM6SSM-2
—
UM1
VM6S
VALPEY
Notes
• The above cross reference is the suggested substitute for key competitors part numbers. Vishay does not accept any responsibility for any errors that result from this cross
reference. Please contact factory for other crosses.
(1) The Vishay product is pin compatible in a metal can. The SG-51 and SG531 are in a molded package.
—
ACH
XO-52B
XO-523BE
ABM5
XT36C
—
ABLS
XT49M
XO-523B
ECCM5
XT46C
ACHA
ABU
XTUM1
XO-52BE
ABL
XT49S
VISHAY P/N ABRACON AVX KYOCERA
CROSS REFERENCE - CRYSTALS AND OSCILLATORS
Cross Reference
Vishay Dale
www.vishay.com
53
Notes
Vishay Dale
www.vishay.com
54
Build Vishay
into your Design
WORLDWIDE SALES CONTACTS
Visit www.vishay.com for product information or select below
for a current list of sales offices, representatives, and distributors.
THE AMERICAS
EUROPE
UNITED STATES
GERMANY
VISHAY AMERICAS
ONE GREENWICH PLACE
SHELTON, CT 06484
UNITED STATES
PH: +1-402-563-6866
FAX: +1-402-563-6296
VISHAY ELECTRONIC GMBH
GEHEIMRAT-ROSENTHAL-STR. 100
95100 SELB
GERMANY
PH: +49-9287-71-0
FAX: +49-9287-70435
ASIA
FRANCE
SINGAPORE
VISHAY S.A.
199, BLVD DE LA MADELEINE
06003 NICE, CEDEX 1
FRANCE
PH: +33-4-9337-2727
FAX: +33-4-9337-2726
VISHAY INTERTECHNOLOGY
ASIA PTE LTD.
37A TAMPINES STREET 92 #07-00
SINGAPORE 528886
PH: +65-6788-6668
FAX: +65-6788-0988
P.R. CHINA
VISHAY CHINA CO., LTD.
15D, SUN TONG INFOPORT PLAZA
55 HUAI HAI WEST ROAD
SHANGHAI 200030
P.R. CHINA
PH: +86-21-5258 5000
FAX: +86-21-5258 7979
UNITED KINGDOM
VISHAY LTD.
SUITE 6C, TOWER HOUSE
ST. CATHERINE’S COURT
SUNDERLAND ENTERPRISE PARK
SUNDERLAND SR5 3XJ
UNITED KINGDOM
PH: +44-191-516-8584
FAX: +44-191-549-9556
JAPAN
VISHAY JAPAN CO., LTD.
SHIBUYA PRESTIGE BLDG. 4F
3-12-22, SHIBUYA
SHIBUYA-KU
TOKYO 150-0002
JAPAN
PH: +81-3-5466-7150
FAX: +81-3-5466-7160
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
FREQUENCY CONTROL PRODUCTS
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
DATA B O O K
World Headquarters
Vishay Intertechnology, Inc.
63 Lancaster Avenue
Malvern, PA 19355-2143
United States
© Copyright 2010 Vishay Intertechnology, Inc.
® Registered trademarks of Vishay Intertechnology, Inc.
All rights reserved. Printed in Germany.
Specifications subject to change without notice.
w w w. v i s h a y. c o m
VSE-DB0020-1012