ABS Quality Evaluations Certificate Of Conformance This is to certify that the Health and Safety Management System of: Custom Sensors & Technologies de México S. A. de C.V. Av. Producción No. 2181 Parque Industrial Internacional Tijuana Tijuana, Baja California 22425 México (WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX) has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: OHSAS 18001:2007 The Health and Safety Management System is applicable to: MANUFACTURE OF SOLID STATE RELAYS, POWER MODULES, POTENTIOMETERS, POSITION SENSING DEVICES, ENCODERS, DC MOTORS AND ACTUATORS; AND DESIGN OF SOLID STATE RELAYS This certificate may be found on the ABS QE Website (www.abs-qe.com). For certificates issued in the People's Republic of China information may also be verified on the CNCA website (www.CNCA.gov.cn). Certificate No: Original Certification Date: 47208 12 October 2012 Effective Date: 24 June 2015 Expiration Date: 23 June 2018 Revision Date: 24 June 2015 Alex Weisselberg, President Validity of this certificate is based on the periodic audits of the management system defined by the above scope and is contingent upon prompt, written notification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof. ABS Quality Evaluations, Inc. 16855 Northchase Drive, Houston, TX 77060, U.S.A. Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation. Copyright 2011 ABS Quality Evaluations, Inc. All rights reserved. Page 1 of 2 ABS Quality Evaluations OHSAS 18001:2007 Certificate Of Conformance ANNEX Certificate No: 47208 Custom Sensors & Technologies de México S. A. de C.V. At Below Facilities: Facility: Sitio Anexo Blvd. Otay No 2040 local -6-B Colonia Parque Ind. Tijuana Tijuana, Baja California México Activity: Raw material warehouse, incoming inspection, machining and procurement of materials Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation. Copyright 2011 ABS Quality Evaluations, Inc. All rights reserved. Page 2 of 2