Data Sheet SML-R1 Series PICOLEDTM-side 16115(0604) 1.6×1.15mm(t=0.2mm) Features ・Ultra compact, thin side-view type LED Color Type V U D Y M P B ・Ultra low height package t=0.2mm Specifications Part No. Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Chip Emitting Power Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous Intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Max. VR(V) Min.*2 Typ. Max.*2 IF(mA) Min. Typ. IF(mA) Typ.(V) IF(mA) (μA) PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) (mcd) (mcd) (nm) (nm) (nm) ■ SML-R12V8T 625 630 635 16 40 615 620 625 25 63 40 100 25 63 Red ■ SML-R12U8T ■ SML-R12D8T AIGaInP on GaAs ■ SML-R12Y8T Orange 54 2.2 20 Yellow 100＊1 5 -40 to +85 602 605 608 587 590 593 20 20 -40 to +100 10 5 20 ■ SML-R12M8T Yellowish Green 569 572 575 10 25 ■ SML-R12P8T Green 557 560 563 2.5 6.3 465 470 14 36 ■ SMLR13BDT InGaN Blue 66 3.0 5 475 5 5 ＊1:Duty1/10, 1kHz /＊2:Reference Dimensions Recommended Solder Pattern Viewing Angle Directivity (deg) 20° 30° 10° 0° 10° 20° 40° 40° 80° 80° 1.15 0.68 50 0 90° 100 50 10° 20° 30° 40° 50° 60° 70° 80° 90° 100 RELATIVE INTENSITY (%) 50 0 90° 100 50 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) SMLR13BDT SCANNING ANGLE (deg) SCANNING ANGLE (deg) Directivity (deg) 30° 20° 10° 0° 10° 20° 30° 40° 80° 80° 50 0 0° 10° 20° 30° 40° 50 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) 50° 60° 60° 70° 70° (unit : mm) 10° 50° 60° 60° 90° 100 20° 40° 50° 50° Cathode mark Directivity (deg) X’ - Y’ 30° 40° Tolerance : ±0.1 (unit : mm) 0° 80° RELATIVE INTENSITY (%) X-Y 1.1 10° 70° 70° 70° 90° 100 20° 60° 60° 60° 30° 50° 50° 50° 3.3 Directivity (deg) X’ - Y’ 30° 40° 0.9 SCANNING ANGLE (deg) SCANNING ANGLE (deg) X-Y 0.2+0.05 -0.02 1.2 SML-R12x8T Series 1.2 1.6 90° 100 70° 70° 80° 80° 90° 100 50 0 50 90° 100 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) ＊PICOLEDTM is ROHM's pending trademark. www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 1/3 2012.11 - Rev.C SML-R1 Series Electrical Characteristics Curves Forward Current-Forward Voltage FORWARD CURRENT：IF (mA) ■ ■ ■ ■ ■ ■ ■SML-R12V8T ■SML-R12U8T ■SML-R12D8T ■SML-R12Y8T ■SML-R12M8T ■SML-R12P8T 10 1 1.0 1.5 2.0 ■ ■ SMLR13BDT ■ ■ SMLR13BDT ■ ■ SMLR13BDT ■ ■ SMLR13BDT 10 1 2.0 3.0 2.5 Ta=25°C 100 FORWARD CURRENT：IF (mA) Ta=25°C 100 FORWARD VOLTAGE：VF (V) 2.5 3.0 3.5 4.0 FORWARD VOLTAGE：VF (V) Luminous Intensity-Atmosphere Temperature RELATIVE LUMINOUS INTENSITY (a.u.) ■ 1.4 1.2 ■SML-R12V8T ■SML-R12U8T ■SML-R12D8T ■SML-R12Y8T ■SML-R12M8T ■SML-R12P8T 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 IF=5mA 1.6 RELATIVE LUMINOUS INTENSITY (a.u.) IF=20mA 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 100 ATMOSPHERE TEMPERATURE：Ta (°C) -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) Luminous Intensity-Forward Current RELATIVE LUMINOUS INTENSITY (a.u.) 1.0 0.8 ■ ■ ■ ■ ■ ■ ■SML-R12V8T ■SML-R12U8T ■SML-R12D8T ■SML-R12Y8T ■SML-R12M8T ■SML-R12P8T Ta=25°C 4.0 RELATIVE LUMINOUS INTENSITY (a.u.) Ta=25°C 1.2 0.6 0.4 0.2 0 3.0 2.0 1.0 0 0 5 10 15 20 0 PEAK FORWARD CURRENT：IF (mA) 5 10 15 20 FORWARD CURRENT：IF (mA) Derating 20 ■SML-R12V8T ■SML-R12U8T ■SML-R12D8T ■SML-R12Y8T ■SML-R12M8T ■SML-R12P8T MAXIMUM FORWARD CURRENT：IF (mA) MAXIMUM FORWARD CURRENT： (mA) ■ 30 10 0 -40 -20 0 20 40 60 80 100 www.rohm.com 25 20 15 10 5 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) AMBIENT TEMPERATURE：Ta (°C) © 2012 ROHM Co., Ltd. All rights reserved. 30 2/3 2012.11 - Rev.C SML-R1 Series Rank Reference of Brightness Red (V, U) Package size(mm) Luminous Intensity (mcd) Height(mm) Side View 16115 Chip LEDs G H J K 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 L M N P 6.3 to 10 10 to 16 16 to 25 Q R 25 to 40 40 to 63 63 to 100 SML-R12V8T SML-R12U8T 0.2 (Ta=25˚C, IF＝20mA) W X S T U V 100 to 160 160 to 250 250 to 400 400 to 630 Orange (D) Package size(mm) Luminous Intensity (mcd) Height(mm) Side View 16115 Chip LEDs H J K L M N P Q R S T U V 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 16 to 25 25 to 40 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 0.2 Luminous Intensity (mcd) Height(mm) Side View 16115 Chip LEDs G H J K Side View Chip LEDs 16115 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 M N P Q R S T U V 6.3 to 10 10 to 16 16 to 25 25 to 40 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 F G H J K 0.63 to 1.0 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 0.2 Luminous Intensity (mcd) Height(mm) Side View Chip LEDs 16115 630 to 1000 1000 to 1600 SML-R12Y8T L M N 6.3 to 10 10 to 16 P 16 to 25 25 to 40 SML-R12M8T (Ta=25˚C, IF＝20mA) W X Q R S T U V 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1800 SML-R12P8T Blue (B) Package size(mm) 1000 to 1600 (Ta=25˚C, IF＝20mA) W X L 0.2 Luminous Intensity (mcd) Height(mm) 630 to 1000 SML-R12D8T Green (M, P) Package size(mm) 1000 to 1600 (Ta=25˚C, IF＝20mA) W X G Yellow (Y) Package size(mm) 630 to 1000 G H J K L M N P Q R S T U 0.9 to 1.4 1.4 to 2.2 2.2 to 3.6 3.6 to 5.6 5.6 to 9.0 9 to 14 14 to 22 22 to 36 36 to 56 56 to 90 90 to 140 140 to 220 220 to 360 0.2 (Ta=25˚C, IF＝5mA) V W 360 to 560 560 to 900 SMLR13BDT Part No. Construction ∗ “−” will be taken out for emitting color B/E series. S M L Special Code will be applied for Emitting color B/E series. R 1 2 Series name Package name T M Chip Type Emitting Color T 8 6 Resin Color Taping Specifications P Rank sign (Brightness Rank)∗ 2 High Brightness Type V Red:630nm T Transparent Colorless T86 Cathode at sprocket hole side 3 Ultra High Brightness Type U Red:620nm W MilkyWhite T87 Reverse of T86 D Orange:605nm Y Yellow:587(590)nm M Yellowish-Green:572nm P Green:560nm B Blue:470nm ∗ Concerning the Brightness rank • Please refer to the rank chart above for luminous intensity classification. • Part name is individual for each rank. • When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 3/3 2012.11 - Rev.C Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. R1102A