IDTQS4A201 HIGH-PERFORMANCE CMOS TWO-BY-TWO ANALOG CROSS POINT INDUSTRIAL TEMPERATURE RANGE QUICKSWITCH® PRODUCTS HIGH-PERFORMANCE CMOS TWO-BY-TWO ANALOG CROSS POINT SWITCH FEATURES: DESCRIPTION: Ω Low ON resistance: rDS(ON) = 5Ω Fast transition time: tTRAN = 6ns Wide bandwidth: 1.3GHz (-3dB point) Crosstalk: 90dB at 50KHz, -40dB at 5MHz, -30dB at 30MHz Off-isolation: -70dB at 50KHz, -40dB at 5MHz, -30dB at 30MHz Single 5V supply Can be used as multiplexer or demultiplexer TTL-compatible control inputs µA Ultra-low quiescent current: 3µ Switch turn on time of 6.5ns Available in QSOP package • • • • • • • • • • • The QS4A201 is a high-performance CMOS two-by-two analog cross point switch. This device provides two sets of five high-speed CMOS switches providing "cross point" connection between inputs and outputs. The low ON resistance of the QS4A201 allows inputs to be connected to outputs with low insertion loss and high bandwidth. TTL-compatible control circuitry with “Break-Before-Make” feature prevents contention. The QS4A201 with 1.3GHz bandwidth makes it ideal for high-performance video signal switching, audio signal switching, and telecomm routing applications. High performance and low power dissipation makes this device ideal for battery operated and remote instrumentation applications. The QS4A201 is offered in the QSOP package and has several advantages over conventional packages such as PDIP and SOIC, including: • Reduced signal delays due to denser component packaging on circuit boards • Reduced system noise due to less pin inductance APPLICATIONS: • • • • • • • • IDTQS4A201 High-speed video signal switching/routing HDTV-quality video signal routing Phase reversal Data acquisition ATE systems Telecomm routing Token Ring transceivers High-speed networking The QS4A201 is characterized for operation at -40°C to +85°C. FUNCTIONAL BLOCK DIAGRAM A0 C0 B0 D0 A4 C4 B4 D4 S E CO NTROL LOGIC The IDT logo is a registered trademark of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE AUGUST 2000 1 c 2000 Integrated Device Technology, Inc. DSC-5553/1 IDTQS4A201 HIGH-PERFORMANCE CMOS TWO-BY-TWO ANALOG CROSS POINT INDUSTRIAL TEMPERATURE RANGE ABSOLUTE MAXIMUM RATINGS(1) PIN CONFIGURATION Symbol Description VTERM(2) Max Unit VTERM(3) Supply Voltage to Ground –0.5 to +7 V DC Switch Voltage VS –0.5 to +7 V E C0 1 24 VCC 2 23 D4 — Analog Input Voltage –0.5 to +7 V A0 3 22 B4 VTERM(3) DC Input Voltage VIN –0.5 to +7 V B0 4 21 A4 VAC AC Input Voltage (pulse width ≤20ns) –3 V D0 5 20 C4 IOUT DC Output Current 120 mA PMAX Maximum Power Dissipation 0.7 W C1 6 19 D3 TSTG Storage Temperature –65 to +150 °C A1 7 18 B3 B1 8 17 A3 D1 9 16 C3 C2 10 15 D2 A2 11 12 14 B2 13 S GND NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. All terminals except VCC . PIN DESCRIPTION QSOP TOP VIEW Pin Names I/O Ax, Bx I/O Ports A, B Description Cx, Dx I/O Ports C, D E I Bus Switch Enable S I Bus Exchange FUNCTION TABLE(1) E S Ax Bx Function H X Z Z Disable L L Cx Dx Enable L H Dx Cx Exchange NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Z = High-Impedance 2 IDTQS4A201 HIGH-PERFORMANCE CMOS TWO-BY-TWO ANALOG CROSS POINT INDUSTRIAL TEMPERATURE RANGE DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Industrial: TA = –40°C to +85°C, VCC = 5V ± 5% Symbol Parameter Test Conditions Min. Typ.(1) Max. Unit Analog Switch VIN Analog Signal Range(2) rDS(ON) Drain-source ON resistance(2,3) IC(OFF) Channel Off Leakage Current IC(ON) Channel On Leakage Current –0.5 1 Vcc - 1 V Vcc = Min., VIN = 0V, ION = 30mA — 5 7 Ω Vcc = Min., VIN = 2.4V, ION = 15mA — 13 17 Ax, Bx = Vcc or 0V; Cx, Dx = 0V or Vcc; E = Vcc — 1 — nA Ax = Bx = 0V — 1 — nA (each channel is turned on sequentially) Digital Control VIH Input HIGH Voltage Guaranteed Logic HIGH for Control Pins 2 — — V VIL Input LOW Voltage Guaranteed Logic LOW for Control Pins — — 0.8 V Exchange Switching Time RL = 1KΩ, CL = 100pF 0.5 — 6.6 ns S to Cx, Dx (See Transition Time) 0.5 — 6.5 ns 0.5 — 6 ns Dynamic Characteristics tTRANS tON(E) tOFF(E) Enable Turn-On Time RL = 1KΩ, CL = 100pF E to Cx, Dx (See Switching Time) Enable Turn-Off Time RL = 1KΩ, CL = 100pF E to Cx, Dx (See Switching Time) tPD Group Delay(2,4a) RL = 1KΩ, CL = 100pF — — 250 ps f3dB -3dB Bandwidth VIN = 0 to 1V, 1Vp-p, RL = 75Ω — 1.3 — GHz Off-isolation VIN = 0 to 1V, 1Vp-p, RL = 75Ω, f = 5.5MHz — -40 — dB XTALK Crosstalk VIN = 0 to 1V, 1Vp-p, RL = 75Ω, f = 5.5MHz — -40 — dB C(OFF) Switch Off Capacitance E = Vcc, VIN = VOUT = 0V — 5 — pF C(ON) Switch On Capacitance E = 0V, VIN = VOUT = 0V — 10 — pF — 1.5 — pC QCI Charge Injection NOTES: 1. Typical values are at VCC = 5.0V, TA = 25°C. 2. Max value is guaranteed but not production tested. 3. Measured by voltage drop between A and C pins or B and D pins at indicated current through the switch. ON resistance is determined by the lower of the voltages on the two (A, C, or B, D) pins. 4. The bus switch contributes no group delay other than the RC delay of the ON resistance of the switch and load capacitance. Group delay of the bus switch, when used in a system, is determined by the driving circuit on the driving side of the switch and its interaction with the load on the driven side. POWER SUPPLY CHARACTERISTICS Symbol ICC Parameter Supply Current Test Conditions VCC = Max., VIN = GND or VCC 3 Max. Unit 3 µA IDTQS4A201 HIGH-PERFORMANCE CMOS TWO-BY-TWO ANALOG CROSS POINT INDUSTRIAL TEMPERATURE RANGE TYPICAL CHARACTERISTICS 60 180 VCC = 5V RL = 75Ω 150 50 120 40 90 30 (dB) (d B ) V CC = 5V R L = 75 Ω Crosstalk 60 20 Off-isolation Off-isolation 30 Crosstalk 10 0 1K 10K 100K 1M 10M 100M 1G 0 100M 10G Freq uen cy (H z) Off-isolation and Crosstalk vs. Frequency 200M 300M 400M 500M Frequency (Hz) 600M 700M Off-isolation and Crosstalk vs. Frequency NOTES: 1. Crosstalk = 20 log |VO/VS| 2. Off-isolation = 20 log |VO/VS| NOTES: 1. Crosstalk = 20 log |VO/VS| 2. Off-isolation = 20 log |VO/VS| 160 1 VCC = 5V RL = 75Ω 140 0 120 1 RL = 75Ω 2 (dB) (dB) Crosstalk 100 80 Off-isolation 4 60 40 10K 3 5 20K 30K 40K 50K Frequency (Hz) 60K 70K VCC = 5V 6 1K Off-isolation and Crosstalk vs. Frequency 10K 100K 1M 10M 100M Frequency (Hz) Insertion Loss vs. Frequency NOTES: 1. Crosstalk = 20 log |VO/VS| 2. Off-isolation = 20 log |VO/VS| NOTE: 1. Insertion Loss = 20 log |VO/VS| 4 1G 10G IDTQS4A201 HIGH-PERFORMANCE CMOS TWO-BY-TWO ANALOG CROSS POINT INDUSTRIAL TEMPERATURE RANGE TYPICAL CHARACTERISTICS (CONTINUED) 18 1 16 r DS (On) - Drain Source On-resistance(Ω ) 2 (dB ) 0 R L = 75 Ω 1 2 3 500M V CC = 5V 600M 700M 800M 900M 1G 1.1G Frequen cy (Hz) 14 12 VCC = 4.75V 10 8 6 4 Insertion Loss vs. Frequency 0.0 0.5 1.0 1.5 2.0 2.5 3.0 VIN (Volts) NOTE: 1. Insertion Loss = 20 log |VO/VS| RON LINK On-Resistance vs. VIN 5 IDTQS4A201 HIGH-PERFORMANCE CMOS TWO-BY-TWO ANALOG CROSS POINT INDUSTRIAL TEMPERATURE RANGE TEST CIRCUITS 5V Vcc A0-A3 B0-B3 C0-C3 3.0V SELECT E 1.5V INPUT QS4A201 VIN 0V t SWITCH A4 t SWITCH S SWITCH 1.5V OUTPUT 50Ω GND B4 5V C4 VOUT 500Ω 50 pF Transition Time 5V Vcc 3.0V CONTROL A0-A3 1.5V INPUT C0-C3 0V S VIN E 0.3V QS4A201 A4 5V OUTPUT t OFF(E) 50Ω 3.0V CONTROL GND C4 500 Ω VOUT 1.5V INPUT 0V t ON(E) 50 pF OUTPUT Switching Time 6 0.3V IDTQS4A201 HIGH-PERFORMANCE CMOS TWO-BY-TWO ANALOG CROSS POINT INDUSTRIAL TEMPERATURE RANGE TEST CIRCUITS (CONTINUED) 5V 5V Vcc VS A4 Vcc A4 VOUT C4 RL = 75Ω VS RL = 75Ω B4 QS4A201 E S QS4A201 GND E S Insertion Loss NOTES: 1. Crosstalk = 20 log |VO/VS| 2. All unused pins are grounded. 5V VS Vcc C4 A4 VOUT RL = 75Ω QS4A201 E S GND Crosstalk NOTES: 1. Insertion Loss = 20 log |VO/VS| 2. All unused pins are grounded. GND Off-Isolation NOTES: 1. Off-isolation = 20 log |VO/VS| 2. All unused pins are grounded. 7 VOUT C4 IDTQS4A201 HIGH-PERFORMANCE CMOS TWO-BY-TWO ANALOG CROSS POINT INDUSTRIAL TEMPERATURE RANGE ORDERING INFORMATION IDTQS XXXXX Device Type XX Package CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054 Q Quarter Size Outline Package 4A201 High Performance CMOS Two-by-Two Analog Cross Point Switch for SALES: 800-345-7015 or 408-727-6116 fax: 408-492-8674 www.idt.com 8 for Tech Support: [email protected] (408) 654-6459