SKS 845N B6C 570 V16 Electrical Characteristics Symbol Conditions min Electrical Data TAMBIENT = 45°C ; No overload ID Maximum DC current VAC Maximum AC voltage (+/-10%) VBUS DC Bus voltage PTOTAL Maximum stack power Stack power loss (TAMBIENT = 45°C) PLOSS Environnmental Data Symbol Thyristor Presspack stack Conditions typ max 845 500 670 570 min Mechanical Data SEMIKRON document number.revision.version Drawing Approximate total weight Weight Installation altitude without derating Altitude IEC 60529 Protection Pollution Degree EN 50178 Unit A VAC VDC kW W typ max 12100432.00.A 105.6 1 000 IP00 2 Unit kg m - SEMISTACK® CLASSICS - B6C Three phase controlled rectifier Stack Protection Symbol Preliminary Data RC Circuit Ordering No. Description 08785010 SKS 845N B6C 570 V16 Type R C Conditions RC in parallel with each electrical switch Resistance (80W) min typ 33 0.47 max Unit Ohm µF Features • Non-isolated power stacks • SKT 760/16 • Heatsink U3/515 • Natural cooling • RC circuit included Typical Applications • Regulated power supplies • Alternator excitation • Motor control Remarks This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee, expressed or implied, is made regarding delivery, performance or suitability. B6C © by SEMIKRON Rev. 1 - 06.08.2015 1 SKS 845N B6C 570 V16 Dimensions This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev. 1 - 06.08.2015 2