MAT Steel case and bezelring pressure gauges Ø 40 - 50 - 63 - 80 - 100 mm Conform to EN 837-1 standard, Pressure Directive PED 97/23/CE Pressure gauges developed for OEM applications in compressed gases, lubricating circuits, hot or cold water networks, water distribution. Specifications (20°C) Options Ranges From -1... 0 to 0... 400 bar. (see graduations overleaf) Restrictor screw in connection. Code 0771 Working pressure steady : 75% of full scale value short time : 100% of full scale value Special dial Standard accuracy ± 2.5% of full scale Other mountings. Male thread out of standard Special graduations Standard degree of protection IP 32 according to NF EN 60 529. Sensing element Cupreous metal Bourdon tube. Connection Brass, with 14 mm square. Thread G 1/8 (MAT Ø 40) G 1/4 (MAT Ø 50, 63) G 1/2 (MAT Ø 80, 100) Tube connection assembly Welded : Sn/Pb up to 40 bar Sn/Ag greater than 40 bar Gauge working process fluid: -20 ... 70°C Temperature Temperature error Additional error when temperature of the pressure element deviates from +20°C (68°F) ±0.4% for every 10°C (18°F) rising or falling. Percentage of span. Case Black painted steel. Bezelring Steel bezelring crimped on case (except type F, Ø 40) Window Plastic (MAT Ø 80-100), Kostil (MAT Ø 40-50-63). Dial White ABS (MAT Ø 40-50-63 and P ≤ 40 bar) Aluminium alloy, black graduations and figures on white background (others). Pointer Knife-edge, aluminium alloy, black painted. www.baumer.com/process Design and specifications subject to change without notice Data Sheet A21.01 Page 1 Dimensions (mm) Ø 80, 100 Ø 40, 50, 63 Type D Type F Type D G1/2 Type D Type F 40 55g 60g 50 94g 103g 63 120g 131g Type Dimensions Ø 40 D F D/F D D/F B A A C 42 39,5 42,5 G1/4 50 63 53 63 D : 24 F : 25,5 29 D : 28 F : 28 48 54,5 50,5 48,5 G1/4 G1/4 D A 81 81 100 F E1 13 10 13,5 D/F G 33 30,5 38,5 Weight in g MAT 4 MAT 5 TYPE 80 100 D 227 360 F 250 / Codification - MAT Model Pressure gauges Nominal diameter Ø 40 mm Ø 50 mm Ø 63 mm Ø 80 mm Ø 100 mm 4´ digit Type of mounting bottom connection back connection 5´ digit Hydraulic connection G 1/8 (for Ø 40) G 1/4 (for Ø 50-63) G 1/2 (for Ø 80 -100) 6´ digit Liquid filling Without 7´ digit Unit of measurement bar 8´ digit Pressure range See codes in table MATxxx0Bxx 1´...3´ digit MAT 1 2 3 4 5 D F 1 2 3 code ranges 74 59 15 16 18 19 20 22 24 26 27 29 31 33 35 38 (bar) -1 + -1 + 0+ 0+ 0+ 0+ 0+ 0+ 0+ 0+ 0+ 0+ 0+ 0+ 0+ 0+ Ø 1.5 0 1 1.6 2.5 4 6 10 16 25 40 60 100 160 250 400 40 50 63 80 X X X X X X X X X X X X X X X X X X X X X X X X X X X X 100 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 0 B 9´...10´ digit www.baumer.com/process Design and specifications subject to change without notice xx Data Sheet A21.01 Page 2 UK/09-2009 This data sheet may only be reproduced in full Weight Ø TYPE Ø 80 type F 80 type D 100 type D