RoHS Power Chip Shielded Inductors Dimensions: PCS35 Inches (mm) 0.354±0.013 (8.99±0.33) 0.197±0.02 0.157±0.12 (5.00±0.51) (3.99±3.05) 0.531 MAX. (13.49) 0.393±0.013 (9.98±0.33) 0.118±0.008 (3.00±0.20) Allied Part Number Inductance (µh) Tolerance (%) Test Freq. (MHz) DCR Max. (Ω) *Rated Current (A) PCS35-100M-RC 10 20 2.52 0.05 2.40 PCS35-120M-RC 12 20 2.52 0.06 2.30 PCS35-150M-RC 15 20 2.52 0.07 2.10 PCS35-180M-RC 18 20 2.52 0.08 1.90 PCS35-220M-RC 22 20 2.52 0.09 1.70 PCS35-270M-RC 27 20 2.52 0.10 1.60 PCS35-330L-RC 33 15 2.52 0.11 1.40 PCS35-390L-RC 39 15 2.52 0.13 1.30 PCS35-470L-RC 47 15 2.52 0.15 1.20 PCS35-560L-RC 56 15 2.52 0.19 1.10 PCS35-680L-RC 68 15 2.52 0.22 0.97 PCS35-820L-RC 82 15 2.52 0.30 0.88 PCS35-101L-RC 100 15 1KHz 0.34 0.80 PCS35-121L-RC 120 15 1KHz 0.38 0.73 PCS35-151L-RC 150 15 1KHz 0.51 0.65 PCS35-181L-RC 180 15 1KHz 0.57 0.60 PCS35-221L-RC 220 15 1KHz 0.77 0.54 PCS35-271L-RC 270 15 1KHz 0.89 0.49 PCS35-331L-RC 330 15 1KHz 1.01 0.44 PCS35-391L-RC 390 15 1KHz 1.42 0.41 PCS35-471L-RC 470 15 1KHz 1.57 0.37 Features • Small size allows for high mounting density • Suitable for Reflow Solder • Large DC current capability with low DC resistance • Embossed carrier tape available • Polarity identification available • Custom inductances available Characteristics Operating Temp.: -30° to +100°C. External Appearance: Clean & no external defects by visual inspection Terminal Strength: After soldering, push the coils will withstand the followings without falling off. 20.0N 20 sec. Heat Endurance: Heat at 150°C for 3 minutes; then 200°C for 25 seconds. No mechanical or electrical defect after that when back at room temperature. Insulation: Over 100M ohm at 100 VDC (coil and core). Dielectric: 100VDC for one minute (coil and core). Temperature Characteristics: (0 to 2000) x 10 -6°C. Environmental Humidity: Deviate +/-5%, after 96 hours in 90-95% relative humidity at 40°C and 1 hour of drying. Vibration: Deviate +/-5%, vibration of 1 hour, three direction; 10-55-10 Hz; 1.5mm p-p amplitude. Shock: Deviate 5% after drop down 100G shock attitude of one time in each direction. Physical Packaging: 600 per 13 inch reel. *Inductance drop no more than 10% at rated current applied or temperature rise ∆T = 40° C.All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL www.alliedcomponents.com