RoHS Ultra Current Beads Dimensions: UCB05 Inches (mm) 0.032±0.006 (0.8±0.15) 0.070±006 (1.6±0.15) 0.032±0.006 (0.8±0.15) 0.012±0.008 (0.3±0.20) Allied Part Number Impedance (Ω) Tolerance (%) Test Freq. MHz, 200mV DCR Max. (Ω) Rated Current (mA)Max UCB05-100T-RC 10 30 100 .01 5000 UCB05-110T-RC 11 30 100 .015 4500 UCB05-170T-RC 17 30 100 .015 4500 UCB05-250T-RC 25 30 100 .015 4500 UCB05-260T-RC 26 30 100 .015 4500 UCB05-300T-RC 30 30 100 .015 4500 UCB05-330T-RC 33 30 100 .015 4500 UCB05-400T-RC 40 30 100 .015 4500 UCB05-470T-RC 47 30 100 .02 4000 UCB05-600T-RC 60 30 100 .02 4000 UCB05-700T-RC 70 30 100 .02 4000 UCB05-101T-RC 100 30 100 .03 3000 UCB05-121T-RC 120 30 100 .03 3000 UCB05-181T-RC 180 30 100 0.05 2000 UCB05-221T-RC 220 30 100 0.04 2500 All specifications subject to change without notice. 714-665-1140 0.032±0.006 (0.8±0.15) Features • Ultra High Current • 0603 size EIA size • Triple plated RoHS Compliant Terminations • Excellent Solderability Electrical Impedance range: 10Ω to 220Ω Tolerance: 30% over entire range available in tighter tolerances Operating Temp: -55ºC ~ +125ºC Rated Current: The current at which the temperature rise shall be no more that 30ºC Also, the rated current is de-rated above 85ºC to approximately 1000mA at 125ºC Resistance to Solder Heat Pre-Heat 150ºC, 1 minute Solder Composition: Sn/Ag3.0/Cu0.5(Pb-Free) Solder Temp: 260±5 peak for 10 sec. ± 1 sec. Test Equipment (Z): HP4291A RF Impedance/Material Analyzer (RDC): Chen Hwa 502BC/HP4338B Physical Packaging: 4000 pieces per 7 inch reel Marking: None ALLIED COMPONENTS INTERNATIONAL 09/24/2012 15 www.alliedcomponents.com