LBP-602 A / K2 Series LED displays Double Digits LED Numeric Display LBP-602 A / K2 Series zDimensions (Unit : mm) 25.0±0.1 12.5 0.25 2−φ1.5 1.3 8.0 8.0 zFeatures 1) 14.3mm for letter height, two-lines LED numerical displays. 2) About 10 times more luminous intensity than the conventional products by use of 4-element LED dies. (in case of orange color) 3) The same luminous intensity as the conventional products at their 1/10 of current, which contributes lots to energy-saving of sets. 4) Light-leakage from segments probable with the small display packages is very rare. 5) Both anode common type and cathode common type are available in lineup for each color. (15.24) 1.3 14.3 19.0±0.1 10° 3.5Min. LBP-602 A / K2 series are the numberical display units featuring ROHM’s in-house 4-element(AlGaInP) high-brightness LED dies.Their luminous intensity is top class in the industry while degradation is considerably slow, which helps to keep illumination vividness almost unchanged and the image of sets high over a long period of time. 0.5 (2.54) (20.32) Tolerance are ±0.3 unless otherwise noted : zSelection guide Emitting color Common Anode Cathode Red Orange Yellow Green LBP-602VA2 LBP-602VK2 LBP-602DA2 LBP-602DK2 LBP-602YA2 LBP-602YK2 LBP-602MA2 LBP-602MK2 zPin assignments 18 17 16 15 14 13 12 11 10 + + + + + + + a1 + + a2 f1 b1 f2 b2 g1 e1 g2 c1 e2 c2 d1 d2 Digit 1 D.P1 Digit 2 D.P2 + + + + + + + + + Pin No. 1 2 3 4 5 6 7 8 9 Pin No. Function Pin No. Function 1 2 3 4 5 6 7 8 9 Segment "e1" Segment "d1" Segment "c1" D.P1 Segment "e2" Segment "d2" Segment "g2" Segment "c2" D.P2 10 11 12 13 14 15 16 17 18 Segment "b2" Segment "a2" Segment "f2" Digit 2 Common Digit 1 Common Segment "b1" Segment "a1" Segment "g1" Segment "f1" 1/2 LBP-602 A / K2 Series LED displays zEquivalent circuit (anode common) a1 b1 c1 d1 e1 f1 g1 D.P1 16 15 3 2 1 18 17 4 (cathode common) a2 b2 c2 d2 e2 f2 g2 D.P2 11 10 8 6 5 12 7 9 14 Dig.1 a1 b1 c1 d1 e1 f1 g1 D.P1 16 15 3 2 1 18 17 4 13 COM Dig.2 a2 b2 c2 d2 e2 f2 g2 D.P2 11 10 8 6 5 12 7 9 14 COM Dig.1 13 COM Dig.2 COM zAbsolute maximum ratings (Ta=25°C) Red Symbol Parameter PD PD / seg IF IFP VR Topr Tstg Power dissipation Power dissipation Forward current Peak forward current Reverse voltage Operating temperature Storage temperature Orange Green Yellow Unit LBP-602VA2 / VK2 LBP-602DA2 /DK2 LB-602YA2 / YK2 LBP-602MA2 / MK2 896 896 896 896 56 56 56 56 20 20 20 20 60 ∗ 60 ∗ 60 ∗ 60 ∗ 5 5 5 5 −25 to +75 −30 to +85 mW mW mA mA V ˚C ˚C ∗ Pulse width 1ms Duty 1 / 5 zElectrical characteristics (Ta=25°C) Symbol Conditions Parameter Forward voltage Reverse current Peak wavelength Spectral line half width IF=10mA VR=3V IF=10mA IF=10mA VF IR λP ∆λ Red Max. 2.8 100 − − Typ. 1.9 − 650 20 Orange Typ. 1.9 − 605 ∗ 20 ∗ Max. 2.8 100 − − Yellow Typ. 1.9 − 590 20 Max. 2.8 100 − − Green Typ. 1.9 − 572 20 Max. 2.8 100 − − Unit V µA nm nm The products are not radiations resistant. zLuminous intensity Color λP (nm) Red 650 Orange 605 Yellow 590 Green 572 Type LBP-602VA2 LBP-602VK2 LBP-602DA2 LBP-602DK2 LBP-602YA2 LBP-602YK2 LBP-602MA2 LBP-602MK2 Min. Typ. Unit 14 36 mcd 56 250 mcd 90 450 mcd 36 100 mcd A condition of measurement is IF=10mA. 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0