RoHS MLHC10 High Current Multilayer Inductor 0.079±0.008 (2.01±0.20) Dimensions: Inches (mm) 0.035±0.008 (.90±0.20) 0.020±0.012 (0.51±0.30) 0.049±0.008 (1.25±0.20) 0.039 (0.99) 0.047 (1.19) Features 0.045 (1.14) Allied Part Number • 0805 EIA Size • High Current Capacity • Multilayer Ferrite Construction • Excellent Solderability Characteristics Electrical Inductance Tolerance (%) (µ h) Test Freq. (MHz) DCR Max. (Ω) Rated Current Max. (mA) MLHC10-1R0M-RC 1.0 20 1 MHz, 200mV 0.06 2200 MLHC10-2R2M-RC 2.2 20 1 MHz, 200mV 0.10 2000 MLHC10-3R3M-RC 3.3 20 1 MHz, 200mV 0.12 1500 MLHC10-4R7M-RC 4.7 20 1 MHz, 200mV 0.30 900 Inductance Range: 1.0µh ~ 4.7µh Tolerance: 5% acrossr entire range Also available in 10% & 20% Test Frequency: (L) 1MHZ, 200mV Operating Temp: -40ºC ~ 105ºC Rated Current: Based on a temp rise of no more than 30ºC All specifications subject to change without notice. Resistance to Soldering Heat Pre-heating: 150ºC, 1min Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temperature: 260 ± 5ºC Immersion Time: 10 ± 1sec No Damage with more than 75% coverage Inductance within 20 of initial value. Inductance v. Frequency Curve MLHC10-4R7M-RC Test Equipment (L): HP4291A RF Impedance Analyzer DCR: Chen Hwa 502 BC IDC: HP4284A with HP42841A / HP4285A with HP42841A Physical Packaging: 4000 pieces per 7 inch reel. Marking: None 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 09/06/12 www.alliedcomponents.com