RoHS SMD High Current Shielded Choke Dimensions: .287 Max (7.3 Max) PCHC63R8 Inches (mm) Recommended Pattern .063+/-0.2 (1.6+/-0.5) .093 (2.35) .260+/-.008 (6.6+/-0.2) .094 Typ (2.4 Typ) .138 (3.5) .118 Max (3.0 Max) .239 (6.05) Allied Part Number Inductance (µh) Idc=0A Tolerance (%) H e a t R a ted Current DC (A) Typ. Isat Current DC (A) Typ. PCHC63R8-R10M-RC 0.10 20 32.5 60 1.5 1.7 PCHC63R8-R15M-RC 0.15 20 30.0 40 1.9 2.5 PCHC63R8-R22M-RC 0.22 20 23.0 34 2.5 3.0 RDC (mΩ) Typ. RDC (mΩ) Max. PCHC63R8-R33M-RC 0.33 20 21.0 25 3.0 3.5 PCHC63R8-R36M-RC 0.36 20 20.0 24 3.3 3.9 PCHC63R8-R47M-RC 0.47 20 18.0 20 3.5 4.1 PCHC63R8-R56M-RC 0.56 20 16.5 18 3.9 4.5 PCHC63R8-R68M-RC 0.68 20 16.0 17 4.8 5.3 PCHC63R8-R82M-RC 0.82 20 14.0 16 5.4 6.0 PCHC63R8-1R0M-RC 1.0 20 12.0 15 6.7 7.4 PCHC63R8-1R2M-RC 1.2 20 10.0 14 7.8 10.0 PCHC63R8-1R5M-RC 1.5 20 10.0 14 10.6 12.1 PCHC63R8-2R2M-RC 2.2 20 8.0 10 13.5 15.0 PCHC63R8-3R3M-RC 3.3 20 6.5 9.5 18.0 22.0 PCHC63R8-4R7M-RC 4.7 20 5.5 6.5 28.0 33.0 PCHC63R8-5R6M-RC 5.6 20 5.5 6.0 39.0 42.0 PCHC63R8-6R8M-RC 6.8 20 4.5 6.0 43.9 50.0 PCHC63R8-8R2M-RC 8.2 20 4.5 6.0 54.0 60.0 PCHC63R8-100M-RC 10 20 4.0 5.5 62.0 68.0 Features • • • • • Magnetically shielded construction High saturation current up to 45Amps Expanding operating temp range Low DCR resistance Suitable for pick and place Electrical Inductance Range: .10µH to 10µH Additional values available Tolerance: 20% over entire range, Available in tighter tolerances Test Frequency: 100KHz, .5Vdc Operating Temp: -55ºC ~ +125ºC Storage Temp: -55ºC ~ +125ºC Temp rise: ∆ T=40ºC Typical at heat rated current. Under no condition should the temperature of the part exceed 125ºC Inductance drop: 30% typical at rated Isat Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Immersion Time: 10 sec. ± 1 sec. Test Equipment All specifications subject to change without notice. (L): HP 4284A LCR meter or equivalent (DCR): CH16502, Agilent 33420A Micro-Ohm meter (IDC): 3260B WK & DC Bias 3265B WK Physical Packaging: 1000 pieces per 13 inch reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1501/15/13 www.alliedcomponents.com