RoHS PCSLF0732 Power Chip Shielded Inductors Dimensions: Inches (mm) Allied Part Number Inductance (uH) Tolerance (%) Test Freq. KHz,0.5v PCSLF0732-2R2M-RC 2.2 20 1 .018 2.1 PCSLF0732-3R3M-RC 3.3 20 1 .023 1.9 PCSLF0732-4R7M-RC 4.7 20 1 .036 1.7 PCSLF0732-6R8M-RC 6.8 20 1 .041 1.6 PCSLF0732-100M-RC 10 20 1 .053 1.4 PCSLF0732-150M-RC 15 20 1 .075 1.1 PCSLF0732-220M-RC 22 20 1 0.11 .96 PCSLF0732-330M-RC 33 20 1 0.16 .75 PCSLF0732-470M-RC 47 20 1 0.24 .67 PCSLF0732-680M-RC 68 20 1 0.31 .59 PCSLF0732-101M-RC 100 20 1 0.45 .45 (RDC): Chen Hwa 502BC PCSLF0732-151M-RC 150 20 1 0.65 .37 (IDC): HP4284A + HP42841A / Chen Hwa 1061+301A PCSLF0732-221M-RC 220 20 1 1.05 .29 PCSLF0732-331M-RC 330 20 1 1.67 .22 PCSLF0732-471M-RC 470 20 1 2.05 .20 PCSLF0732-681M-RC 680 20 1 3.15 .16 PCSLF0732-102M-RC 1000 20 1 4.78 .13 Features • • • • Shielded SMD Power Inductor Suitable for high current applications Low profile Low Power loss and High current RDC (Ω)±20% IDC (A) Electrical Inductance Range: 2.2µh to 1000µh Tolerance: 20% over entire range Operating Temp: -40ºC ~ +85ºC IDC: Current at which inductance drops by 10% of intial value Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Test Equipment (L): HP 4192A LF Impedance Analyzer Physical Packaging: 1000 pieces per 13 inch reel. Marking: EIA Inductance Code All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/12/08 15 www.alliedcomponents.com