RoHS VDSL LINE TRANSFORMER SURFACE MOUNT MAGNETICS EN60950 Basic Insulation compliant 250Vrms SMD compact foot print design Industrial operating temp: -40ºC to +85ºC Electrical Specifications @25oC Part Number AEP035SI Turns Ratio @10KHz,0.1V 1-4:8-5 (short 2-3,6-7) 4:1 2% Inductance @10KHz,0.1V 1-4 (short 2-3) 109uH 10% THD @100KHz,1.7V DCR Hi-Pot Across(1-4) 100 Ohm (1 Sec / 1mA) @10KHz,0.1V Input, 6.25 Ohm load 1-4 8-5 (1-8) (short 2-3) (short 6-7) @ (5-8),(2-3,6-7 short) (Short 2-3,6-7) Leakage Inductance Cww @100KHz,0.1V @100KHz,0.1V 1-4 ( short 2-3, 5-6-7-8) 2.0uH max 1-8 ( short 2-3,5-7) 70pF max 325m 15% 35m 25% -78dB max 1875VAC/60Hz All specifications subject to change without notice. MECHANICAL 10.00max 10.30 2.25 1.2 ALLIED 7.5 AEP035SI YYWW 2.5 0.7 SUGGESTED PAD LAYOUT 10.8max 2.5±0.05 .7±0.2 8.8±0.2 7.5 0.13 8 SURFACES Units:mm Unless otherwise specified all tolerances are: 0.25 in mm SCHEMATICS LINE 714-665-1140 1 8 3 6 2 7 4 5 CHIP ALLIED COMPONENTS INTERNATIONAL REVISED 15 09/04/13 www.alliedcomponents.com