EMI Filtered Arrays

EMI Filtered Arrays
our filter plates and terminal
blocks provide exceptional
EMI protection of signal
and power lines at a lower
total installed cost
Easy Mate Filter Plates reduce
installation time and overall cost
with its patented snap-in design to
maximize real estate on PCBs. The
Easy Mate Jr. offers a lower profile for
installation of feed-through filters into
small hardware applications…FA3-FA8
Bolt-In Filter Plates provide EMI filtering
for signal and power lines and an excellent
method for electronic system interface. These
plates eliminate the need to mount filters into
bulkheads and are ideal for the isolation of
electronic compartments to suppress EMI…
FA9-FA12
Shrouded Latch Filter Plates
combine a bolt-in filter plate with
the latching feature of a ribbon
cable header providing an easy to
install and highly effective method
for an electronic interface and
EMI solution in one package…
FA13-FA14
Barrier Strip Filtered Terminal Blocks
are available in 2 to 6 terminal versions
and our filter elements provide high
insertion loss for EMI/RFI filtering of
AC and DC power and control
lines…FA19-FA20
PCB Mount Filtered Terminal Blocks
with 2 to 12 terminals available, they
provide quick and easy PCB installation
and maintenance with a filter element
that delivers high insertion loss for
EMI/RFI filtering of low voltage DC
power and control lines…FA22-FA23
Custom Filtered Arrays help meet
your design or manufacturing parameters
through special mechanical and electrical
specifications or by adding varying cable
lengths and terminations for a complete
turnkey assembly. Custom high reliability
assemblies available…FA24
Advantages of a Filtered Array
■
■
■
■
Provide an EMI filtered signal or power
line between electronic system modules
Reduce cost . . . economical method
to meet EMC requirements
Reduce labor . . . eliminate need to
assemble filters into a bulkhead
Outperform surface mount EMI filters
at frequencies above 50 MHz
■
■
■
■
Reduce risk of damage to filter elements
due to thermal shock and installation
Improve reliability . . . every filter plate
is 100% tested for key parameters
Maximize real estate on PCB
Mixed schematics in a single filter plate package
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA1
Filter Plates
Eliminating EMI/RFI interference has become a stringently
enforced matter and needs to be considered at the early
stages of design for all electronic systems. Both internal
and external interference sources have a major impact
on the successful EMC performance of a new system.
Shielding alone is unsatisfactory in shunting unwanted
harmonics, conducted or radiated, on power/control
lines that run through compartments of an electronic
enclosure. This is particularly applicable in systems
operating at frequencies above 50 MHz. Isolation and
the incorporation of feed-through filters (Filter Plates) to
facilitate entering or leaving sensitive compartments in
an assembly are excellent methods to bring electronic
interdependent functions/systems into compliance.
Filter plates allow a means of interfacing voltage
and/or data (controlling instructions) to distant areas of
a system without compromising its performance. Filter
plates provide excellent isolation from 5 MHz to 18 GHz
and beyond, reduce the labor involved for installation,
and reduce the risk of damaging filter elements during
installation. Connecting to these filter plates is easily
accomplished through several methods, including ribbon
style connectors, harnesses, hard wiring or directly
soldering leads at a 90° angle to the printed circuit board.
The drawings on pages FA4, FA10 and FA14 illustrate
how filter plates are incorporated into an electronic system.
Easy Mate Plates
Bolt-in Plates
Custom Plate Solutions
Filter Plate Advantages
■
■
■
■
■
■
■
■
Provide an EMI filtered signal line between
electronic system modules
Reduce cost . . . economical method to meet EMC
requirements
Reduce labor . . . eliminate need to assemble filters
into a bulkhead
Outperform surface mount EMI filters at frequencies
above 50 MHz
Reduce risk of damage to filter elements due to
thermal shock and installation
Improve reliability . . . every filter plate is 100%
tested for key parameters
Maximize real estate on PCB
Mixed schematics in a single filter plate package
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA2
Easy Mate Filter Plates
API’s Spectrum Control brand developed an EMI/RFI
filter plate, Easy Mate, which simplifies installation and
eliminates the need for mounting hardware. The Easy
Mate, patented, is designed to “snap” into the chassis
of electronic systems, reducing the labor required to
complete a plate installation. The drawing on page FA4
shows the Easy Mate design.
These plates are available in two lengths and in both
standard density centers (.100") and high-densitycenters
(2mm). Standard density Easy Mate plates offer up to 26
lines per plate in a double row configuration, while highdensity plates offer up to 32 lines. Custom sizes for Easy
Mate plates are available.
Easy Mate Advantages
Ordering Information
Example:
■
Reduces installation time and overall cost
■
Eliminates mounting hardware and prepwork
■
Flexibility for 1 or 2 rows and standard density
centers (.100") or high density centers (2mm)
■
Improves overall quality and reliability
■
Multiple dimpled finger ground contacts
provides excellent long term EMI filtering
from 5 MHz to 18 GHz
■
Outperforms surface mount devices
■
Maximize real estate on PCB
■
Mixed capacitance values and schematics
■
Ideal for isolation of electronic compartments
■
Available in RoHS compliant versions
52-898-206-BA2
The part number shown represents an Easy Mate filter plate with 2 rows,
6 filters per row. Filters are C style with a capacitance value of 100pF.
The plate length is 1.092", and the leads are bent 90° to the right side.
52 -** 898 Filter
Plates
898
Easy Mate
Standard
Density
960
Easy Mate
Hi-density *
2
06
-
No. of
Filters
No. of
Rows
1 = 1 row
2 = 2 rows
* Maximum capacitance
up to 4000pF C style filter
B
Filter
Designation
Number
of Lines
per Row
If less than
10, use a 0
(zero) first.
**Replace “–” with “F” for
RoHS complaint version
A - T from
table on page
118. ***
A
2
Plate Length
Lead Configuration
A - 1.092 (27.74mm)
B - 1.812 (46.02mm)
0 - Straight
1 - 90° (left)
2 - 90° (right)
3 - 90° (both)
*** To request selective line filtering, a mechanical
configuration or material specification not shown in this
catalog, please complete and forward the design inquiry
form on page FA18. We will review your request and
provide you with a part number.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA3
Easy Mate Filter Plates
Mechanical Specifications
Base Plate
Material ............................ Beryllium copper
Patented
Base Plate
Thickness .......................... .012 inches (0.30mm)
Plating .............................. Tin,
Soldering to Filter Terminals
■
■
■
■
■
■
■
Use a temperature controlled soldering iron with
tip temperature of 525 ± 10° F (275 ± 5° C).
Use an SN 63 RMA flux core solder.
Make mechanical wire connection.
Use heat sink next to filter body where possible.
Clean soldering iron tip.
Clip end of solder—remove 0.5" (12.7mm) to expose
flux for soldering.
Apply soldering iron to wire/flag junction at wetted
solder tip region of iron (Wetted Bridge Method).
Immediately apply solder. Dwell time for soldering
iron tip on product should be 3-5 seconds maximum.
(For non-RoHS versions only)
RoHS version will be silver
Lead Material ................. Copper alloy
Lead Plating .................... Gold plate
Lead Diameter ............... ø .025" (.64mm) for 0.100"
centers (2.54mm)
ø .020 (.51mm) for 0.079"
centers (2.00mm)
Current Rating ................ 5 Amps for .025" ø
(.64mm)
3 Amps for .020" ø
(.51mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA4
No. of
Plate
filtered lines
length (A)
per row
Easy Mate Filter Plates
Standard Density Centers .100"
1.092
(27.74)
Dimensions: inches and (mm)
Lead Spacing: .100" (2.54 mm)
Single
Row
A
B
C
.100 (2.54)
.622 (15.80)
.150 (3.81)
.335 (8.51)
Pin 1
1.812
(46.02)
.150 (3.81)
.118 (3.00)
.118 (3.00)
Straight
(0) †
90° Both
(3) †
.374
(9.50)
.315 (8.00)
MAX.
.315
(8.00)
MAX.
.675
(17.15)
.540 (13.71)
1.102 (28.00)
.315 (8.00)
MAX.
.374
(9.50)
.481
(12.22)
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
(0.00)
(2.54)
(5.08)
(7.62)
(10.16)
(12.70)
(15.24)
(17.78)
(20.32)
(22.86)
(25.40)
(27.94)
(30.48)
0.906
0.806
0.806
0.706
0.706
0.606
0.606
0.506
0.506
0.406
0.406
0.306
0.306
(23.01)
(20.47)
(20.47)
(17.93)
(17.93)
(15.39)
(15.39)
(12.85)
(12.85)
(10.31)
(10.31)
(7.77)
(7.77)
.012 (.31)
.100" Centers
.057 (1.45)
Chassis
.312 (7.93)
.062 (1.58)
Board
.150 (3.81)
.118 (3.00)
90° Both
(3) †
.315
(8.00)
MAX.
.540
(13.71)
.118 (3.00)
.315
(8.00)
MAX.
.381
(9.68)
1.02 (25.93)
High-Density
90° Right
(2) †
.394
(10.00)
.406
(10.32)
.012 (.31)
2mm Centers
.294
.675 (7.47)
(17.15)
.875 (22.22)
.306
(7.78)
.675
(17.17)
.875
(22.25)
.118 (3.00)
.474
(12.04).374
(9.50)
.474 (12.05)
.374 (9.51)
.640
(16.26)
.622 (15.80)
.335 (8.51)
.150 (3.81)
.474
(12.04) .374
(9.50)
1
2
3
4
5
6
7
8
9
10
11
12
13
.265 (6.74)
.100 (2.54)
90° Left
(1) †
(12.60)
(12.60)
(10.06)
(10.06)
(7.52)
(7.52)
.186
(4.73)
.100 (2.54)
1.102 (28.00)
0.496
0.496
0.396
0.396
0.296
0.296
Standard Density
A
B
C
.315 (8.00)
MAX.
0
(0.00)
0.1 (2.54)
0.2 (5.08)
0.3 (7.62)
0.4 (10.16)
0.5 (12.70)
Board mounted
to .312 standoffs
.294
(7.47)
.850 (21.60)
.921 (23.40)
Straight
(0) †
1
2
3
4
5
6
Typical Mounting Applications
.315 (8.00)
MAX.
.381
(9.68)
Pin 1
C
.118 (3.00)
90° Right
(2) †
Double
Row
B
.294
(7.47)
.118 (3.00)
90° Left
(1) †
.374
(9.50)
52-898-XXX-XXX
Board mounted
to .312 standoffs
.453 (11.51)
.186
(4.73) .374 (9.51)
.118 (3.00)
.474
.374 (12.04)
(9.50)
.315
(8.00)
MAX.
.294
(7.47)
.640
(16.26)
.265 (6.74)
.394
(10.00)
.950 (24.13)
Patented
† Refers to lead configuration for part number/ordering information
.057 (1.45)
Chassis
.312 (7.93)
.062 (1.58)
Board
.675
(17.17)
.833
(21.16)
.306
(7.78)
.385
(9.78)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA5
No. of
Plate
filtered lines
length (A)
per row
Easy Mate Filter Plates
Hi-Density Centers 2mm
1.092
(27.74)
Dimensions: inches and (mm)
Lead Spacing: .079" (2.00 mm)
Single
Row
A
B
C
.079 (2.00)
.622 (15.80)
.150 (3.81)
.335 (8.51)
Pin 1
.150 (3.81)
.118 (3.00)
.118 (3.00)
Straight
(0) †
1.812
(46.02)
90° Both
(3) †
.374
(9.50)
.315 (8.00)
MAX.
.315
(8.00)
MAX.
.675
(17.15)
.540 (13.71)
1.102 (28.00)
.294
(7.47)
.118 (3.00)
.118 (3.00)
90° Left
(1) †
52-960-XXX-XXX
B
C
2
3
4
5
6
7
0.079
0.157
0.236
0.315
0.394
0.472
(2.00)
(4.00)
(6.00)
(8.00)
(10.00)
(12.00)
0.463
0.463
0.385
0.385
0.306
0.306
(11.77)
(11.77)
(9.77)
(9.77)
(7.77)
(7.77)
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
0.079
0.157
0.236
0.315
0.394
0.472
0.551
0.630
0.709
0.787
0.866
0.945
1.024
1.102
1.181
(2.00)
(4.00)
(6.00)
(8.00)
(10.00)
(12.00)
(14.00)
(16.00)
(18.00)
(20.00)
(22.00)
(24.00)
(26.00)
(28.00)
(30.00)
0.866
0.787
0.787
0.709
0.709
0.630
0.630
0.551
0.551
0.472
0.472
0.394
0.394
0.315
0.315
(22.00)
(20.00)
(20.00)
(18.00)
(18.00)
(16.00)
(16.00)
(14.00)
(14.00)
(12.00)
(12.00)
(10.00)
(10.00)
(8.00)
(8.00)
90° Right
(2) †
Easy M ate Chassis Cut-out Design
.374
(9.50)
.315 (8.00)
MAX.
.315 (8.00)
MAX.
.381
(9.68)
Patent Pending
.294
(7.47)
.850 (21.60)
.921 (23.40)
Double
Row
.374
(9.50)
A
B
A
B
C
.057 ±.002
(1.45 ±.05)
.010 (.25)
.470 (11.95)
.670
(17.04)
.079 (2.00)
.079 (2.00)
.622 (15.80)
.335 (8.51)
.150 (3.81)
Pin 1
Straight
(0) †
Housing thickness
beyond output
customer’s option
Casting
.150 (3.81)
.118 (3.00)
90° Both
(3) †
.118 (3.00)
A
B
.315 (8.00)
MAX.
(9.50)
1.102 (28.00)
90° Left
(1) †
.540
(13.71)
.118 (3.00)
.474
(12.04) .374
(9.50)
.481
(12.22)
.315
(8.00)
MAX.
.453
(11.51).374
.315
(8.00)
MAX.
.381
(9.68)
1.02 (25.93)
.010 (.25)
.294
(7.47)
.675
(17.15)
.833 (21.60)
90° Right
(2) †
.470 (11.95)
.373
(9.47)
.118 (3.00)
.453
.374 (11.51)
(9.50)
.315
(8.00)
MAX.
.294
(7.47)
.373
(9.47)
Plate Length
A
B
1.092 (27.74)
1.812 (46.02)
1.117 (28.41)
1.837 (46.71)
0.816 (20.75)
1.535 (39.04)
.930 (23.62)
Patented
† Refers to lead configuration for part number/ordering information
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA6
Easy Mate Jr. Filter Plates
API’s Spectrum Control brand has expanded its popular
Easy Mate family by adding two more package sizes.
These new sizes are lower profile and facilitate installation
of feed-through filters into small hardware applications
such as PCS linear power amplifiers and RF transmitters.
The Easy Mate Jr. is available in two plate lengths, .990"
and 1.240", and in standard (.100") and high density
centers (2mm).
Mechanical Specifications
Base Plate
Material ..........................Beryllium copper
Easy Mate Jr. Advantages ■
Reduces installation time and overall cost
Base Plate
Thickness .........................010 inches (.25mm)
■
Eliminates mounting hardware and prepwork
■
Increase flexibility with standard density centers
(.100") or high density centers (2mm)
Plating .............................Tin,
■
Improves overall quality and reliability
Lead Material ................Copper alloy
■
Multiple finger ground contacts provide excellent
EMI filtering from 5 MHz to 18 GHz
Lead Plating ..................Gold plate
■
Outperforms surface mount devices
Lead Diameter..............ø .025" (.64mm)
■
Maximize real estate on PCB
■
Mixed capacitance values and schematics
■
Ideal for isolation of electronic compartments
■
Available in RoHS compliant versions
RoHS version will be silver
for 0.100" centers (2.54mm)
.......................................ø .020 (.51mm)
for 0.079" centers (2.00mm)
Current Rating ..............5 Amps for .025" ø (.64mm)
3 Amps for .020" ø (.51mm)
Ordering Information
Example:
52-978-106-BA2
The part number shown represents an Easy Mate Jr. filter plate with 6
filters. Filters are C style with a capacitance value of 100pF. The plate
length is .990", and the leads are bent 90° to the right side.
52 -** 978 Filter
Plates
978
Easy Mate Jr.
Standard
Density
979
Easy Mate Jr.
High-density *
1
06
-
No. of
Filters
No. of
Rows
1 = 1 row
* Maximum capacitance
up to 4000pF C style filter
B
Filter
Designation
Number
of Lines
per Row
If less than
10, use a 0
(zero) first.
**Replace “–” with “F” for
RoHS complaint version
A - T from
table on page
FA17. ***
A
2
Plate Length
Lead Configuration
A - .990 (25.15mm)
B - 1.240 (31.49mm)
0 - Straight
1 - 90° (left)
2 - 90° (right)
3 - 90° (both)
*** To request selective line filtering, a mechanical
configuration or material specification not shown in this
catalog, please complete and forward the design inquiry
form on page FA18. We will review your request and
provide you with a part number.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA7
Standard Density Centers .100" (D)
Easy Mate Jr. Filter Plates
A
B
C
D
.090 (2.29)
.180 .260
(4.57) (6.60)
1.24
(31.49)
.090 (2.29)
Straight
(0) †
Double Bends
(3) †
.118 (3.00)
.284
(7.21)
.315
(8.00)
MAX.
.118 (3.00)
.420 (10.67)
90° Left
(1) †
.284
(7.21)
90° Right
(2) †
(2.54)
(5.08)
(7.62)
(10.16)
(12.70)
(15.24)
0.395
0.395
0.295
0.295
0.195
0.195
(10.03)
(10.03)
(7.49)
(7.49)
(4.95)
(4.95)
2
3
4
5
6
7
8
9
10
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
(2.54)
(5.08)
(7.62)
(10.16)
(12.70)
(15.24)
(17.78)
(20.32)
(22.86)
0.570
0.470
0.470
0.370
0.370
0.270
0.270
0.170
0.170
(14.48)
(11.94)
(11.94)
(9.40)
(9.40)
(6.86)
(6.86)
(4.32)
(4.32)
.284
(7.21)
0.417
0.417
0.338
0.338
0.259
0.259
(10.58)
(10.58)
(8.58)
(8.58)
(6.58)
(6.58)
2
3
4
5
6
7
8
9
10
0.079
0.157
0.236
0.315
0.394
0.472
0.551
0.630
0.709
(2.00)
(4.00)
(6.00)
(8.00)
(10.00)
(12.00)
(14.00)
(16.00)
(18.00)
0.580
0.502
0.502
0.423
0.423
0.344
0.344
0.266
0.266
(14.75)
(12.75)
(12.75)
(10.75)
(10.75)
(8.75)
(8.75)
(6.75)
(6.75)
.990
(25.15)
† Refers to lead configuration for part number/ordering information
1.24
(31.49)
Typical Mounting Application
.675 (17.16)
.010
(.25)
.296
(7.52)
.090
(2.29)
.284 (7.22)
.265 (6.74)
C
(2.00)
(4.00)
(6.00)
(8.00)
(10.00)
(12.00)
.725 (18.41)
.798 (20.27)
B
0.079
0.157
0.236
0.315
0.394
0.472
.296 (7.52)
.379 (9.63)
52-979-XXX-XXX
2
3
4
5
6
7
.118 (3.00)
.315
(8.00)
MAX.
.315
(8.00)
MAX.
C
0.1
0.2
0.3
0.4
0.5
0.6
No. of
Plate
filtered lines
length (A)
per row
.296 (7.52)
.675 (17.15)
.118 (3.00)
B
High Density Centers 2mm (D)
.315
(8.00)
MAX.
.850 (21.59)
52-978-XXX-XXX
2
3
4
5
6
7
.990
(25.15)
Dimensions: inches and (mm)
Single
Row
No. of
Plate
filtered lines
length (A)
per row
Easy Mate Jr. Chassis Cut-out Design
Patented
A
B
.008 (.20)
.062 (1.58) Board
.640 (16.27)
.313
(7.96)
.046 ± .002
(1.17 ± .05)
.173 (4.40)
.312 (7.93)
2° draft
per side
Casting
R.062 (4X) (1.58)
.057 (1.45)
Chassis
.008 (.20)
R.015 MAX. (.38)
A
B
>.057 (1.45)
Optional thickness
by customer
.173 (4.40)
.057 Thick
R.010 MAX. (.25)
Plate Length
A
B
.990 (25.15)
1.24 (31.49)
1.015 (25.78)
1.265 (32.13)
0.834 (21.18)
1.084 (27.53)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA8
Bolt-in Style Filter Plates
The Bolt-in style plate provides an excellent method
for electronic system interface and EMI filtering. Bolt-in
filter plates are available in a variety of plate sizes and
up to 74 lines per plate in high-density (2mm) and 60 pins
per plate in standard density (.100"). On the larger plate
sizes, API ensures structural integrity through a unique,
patent pending, coining process. The drawing on page
FA10 shows an electronic system utilizing Bolt-in style
filter plates.
Bolt-in Filter Plate Advantages
Ordering Information
Example:
■
Eliminates the need to assemble filters into
a bulkhead
■
Excellent filtering from 5 MHz to 1 GHz
■
Total cost savings vs. customer installed discrete
filter elements
■
Ideal for isolation of electronic compartments
to suppress EMI
■
Outperforms surface mount filters over 50 MHz
■
Improved reliability
■
Mixed capacitance values and schematics
■
Maximize real estate on PCB
■
Available in RoHS compliant versions
52-970-208-BB2
The part number shown represents a Bolt-in style filter plate with 2 rows,
8 filters per row. Filters are C style with a capacitance value of 100pF.
The plate length is 1.560", and the leads are bent 90° to the right side.
52 -** 970 Filter
Plates
970
Bolt-in
Standard
Density
971
Bolt-in
High Density *
2
08
-
No. of
Filters
No. of
Rows
1 = 1 row
2 = 2 rows
* Maximum capacitance
up to 4000pF C style filter
B
Filter
Designation
Number
of Lines
per Row
If less than
10, use a 0
(zero) first.
**Replace “–” with “F” for
RoHS complaint version
A - T from
table on page
FA17. ***
B
2
Plate Length
Lead Configuration
A - 1.060 (26.92mm)
B - 1.560 (39.62mm)
C - 2.560 (65.02mm)
D - 3.560 (90.42mm)
0 - Straight
1 - 90° (left)
2 - 90° (right)
3 - 90° (both)
*** To request selective line filtering, a mechanical
configuration or material specification not shown in this
catalog, please complete and forward the design inquiry
form on page FA18. We will review your request and
provide you with a part number.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA9
Bolt-in Style Filter Plates
Coining feature
Patented
Mechanical Specifications
Base Plate
Material .......................... Brass UNS C26000/C27000
Base Plate
Thickness ........................ .020 inches (.51mm)
Plating ............................ Tin,
RoHS version will be silver
Lead Material ............... Copper alloy
Lead Plating .................. Gold plate
Lead Diameter ............. ø .025" (.64mm)
for 0.100" centers (2.54mm)
....................................... ø .020 (.51mm)
for 0.079" centers (2.00mm)
Current Rating .............. 5 Amps for .025" (.64mm) ø
3 Amps for .020" (.51mm) ø
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA10
Bolt-in Style Filter Plates
No. of
Plate
filtered lines
length (A)
per row
Standard Density Centers .100"
(0.00)
(2.54)
(5.08)
(7.62)
(10.16)
0.53 (13.46)
0.43 (10.92)
0.43 (10.92)
0.33 (8.38)
0.33 (8.38)
1.560 *
(39.62)
1
2
3
4
5
6
7
8
9
10
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
(0.00)
(2.54)
(5.08)
(7.62)
(10.16)
(12.70)
(15.24)
(17.78)
(20.32)
(22.86)
0.73
0.73
0.63
0.63
0.53
0.53
0.43
0.43
0.33
0.33
(18.54)
(18.54)
(16.00)
(16.00)
(13.46)
(13.46)
(10.92)
(10.92)
(8.38)
(8.38)
2.560
(65.02)
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
0.4 (10.16)
0.5 (12.70)
0.6 (15.24)
0.7 (17.78)
0.8 (20.32)
0.9 (22.86)
1.0 (25.40)
1.1 (27.94)
1.2 (30.48)
1.3 (33.02)
1.4 (35.56)
1.5 (38.10)
1.6 (40.64)
1.7 (43.18)
1.8 (45.72)
1.9 (48.26)
1.03
1.03
0.93
0.93
0.83
0.83
0.73
0.73
0.63
0.63
0.53
0.53
0.43
0.43
0.33
0.33
(26.16)
(26.16)
(23.62)
(23.62)
(21.08)
(21.08)
(18.54)
(18.54)
(16.00)
(16.00)
(13.46)
(13.46)
(10.92)
(10.92)
(8.38)
(8.38)
3.560
(90.42)
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
(30.48)
(33.02)
(35.56)
(38.10)
(40.64)
(43.18)
(45.72)
(48.26)
(50.80)
(53.34)
(55.88)
(58.42)
(60.96)
(63.50)
(66.04)
(68.58)
(71.12)
(73.66)
1.13
1.13
1.03
1.03
0.93
0.93
0.83
0.83
0.73
0.73
0.63
0.63
0.53
0.53
0.43
0.43
0.33
0.33
(27.70)
(27.70)
(26.16)
(26.16)
(23.62)
(23.62)
(21.08)
(21.08)
(18.54)
(18.54)
(16.00)
(16.00)
(13.46)
(13.46)
(10.92)
(10.92)
(8.38)
(8.38)
A
A-.200
B
.250 (6.35)
.500
(12.70)
Ø .120 x2
Pin 1
.100 (2.54)
C
Straight
(0) †
.020
(.51)
.300 (7.62)
.020 (.51)
1.102 (28.00)
90° Left
(1) †
.020
(.51)
90° Both
(3) †
.300 (7.62)
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.538
(13.71)
.020
(.51)
.290
(7.37)
.675 (17.15)
(.51)
.300 (7.62)
.300 (7.62)
.315
(8.00)
MAX.
.020
.290
(.51)
(7.37)
.850 (21.60)
.315
(8.00)
MAX.
.374
(9.50)
.020
(.51)
.385
(9.78)
.921 (23.40)
Double
Row .100 (2.54)
.500
(12.70)
.100
(2.54)
.100 (2.54)
.250
(6.35)
Ø .120 x2
.100 (2.54)
C
.020
(.51)
.200 (5.08)
.315
(8.00)
MAX.
.538
.020 (.51)
(13.71)
1.102 (28.00)
90° Both
(3) †
.020
(.51)
.315
(8.00)
MAX.
.675
(17.15)
.200 (5.08)
.020
(.51)
.290
(7.37)
.875 (22.22)
90° Left
(1) †
.020
(.51)
.315
(8.00)
MAX.
.020
(.51)
.385
.485
(9.78)
(12.32)
1.02 (25.93)
.474
(12.07)
.390
(9.90)
90° Right
(2) †
.020
(.51)
.200 (5.08)
.200 (5.08)
.474
(12.07)
.374
(9.50)
A
A-.200
B
Pin 1
Straight
(0) †
.374
(9.50)
90° Right
.020
(2) †
.020
(.51)
.315
(8.00)
MAX.
.020
(.51)
.474
(12.07)
.290
(7.37)
.950 (24.13)
.390
(9.90)
Coining feature patented
† Refers to lead configuration for part number/ordering information
C
0
0.1
0.2
0.3
0.4
Dimensions: inches and (mm)
Lead Spacing: .100" (2.54 mm)
.100
(2.54)
B
1
2
3
4
5
1.060 *
(26.92)
Single
Row
52-970-XXX-XXX
* For plate widths 1.060 and 1.560 there will be no coining.
For these plates, increase dimensions to the right .020".
Thus, any dimension on left will be reduced by .020.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA11
Bolt-in Style Filter Plates
No. of
Plate
filtered lines
length (A)
per row
High-Density Centers 2mm
(2.00)
(4.00)
(6.00)
(8.00)
(10.00)
0.487
0.409
0.409
0.330
0.330
(12.38)
(10.38)
(10.38)
(8.38)
(8.38)
1.560 *
(39.62)
3
4
5
6
7
8
9
10
11
12
0.157
0.236
0.315
0.394
0.472
0.551
0.630
0.709
0.787
0.866
(4.00)
(6.00)
(8.00)
(10.00)
(12.00)
(14.00)
(16.00)
(18.00)
(20.00)
(22.00)
0.662
0.662
0.583
0.583
0.504
0.504
0.426
0.426
0.347
0.347
(16.81)
(16.81)
(14.81)
(14.81)
(12.81)
(12.81)
(10.81)
(10.81)
(8.81)
(8.81)
2.560
(65.02)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
0.709
0.787
0.866
0.945
1.024
1.102
1.181
1.260
1.339
1.417
1.496
1.575
1.654
1.732
1.811
1.890
(18.00)
(20.00)
(22.00)
(24.00)
(26.00)
(28.00)
(30.00)
(32.00)
(34.00)
(36.00)
(38.00)
(40.00)
(42.00)
(44.00)
(46.00)
(48.00)
0.886
0.886
0.807
0.807
0.729
0.729
0.650
0.650
0.571
0.571
0.492
0.492
0.414
0.414
0.335
0.335
(22.51)
(22.51)
(20.51)
(20.51)
(18.51)
(18.51)
(16.51)
(16.51)
(14.51)
(14.51)
(12.51)
(12.51)
(10.51)
(10.51)
(8.51)
(8.51)
3.560
(90.42)
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
1.496
1.575
1.654
1.732
1.811
1.890
1.969
2.047
2.126
2.205
2.283
2.362
2.441
2.520
2.598
2.677
2.756
2.835
(38.00)
(40.00)
(42.00)
(44.00)
(46.00)
(48.00)
(50.00)
(52.00)
(54.00)
(56.00)
(58.00)
(60.00)
(62.00)
(64.00)
(66.00)
(68.00)
(70.00)
(72.00)
0.993
0.993
0.914
0.914
0.835
0.835
0.757
0.757
0.678
0.678
0.599
0.599
0.520
0.520
0.442
0.442
0.363
0.363
(25.22)
(25.22)
(23.22)
(23.22)
(21.22)
(21.22)
(19.22)
(19.22)
(17.22)
(17.22)
(15.22)
(15.22)
(13.22)
(13.22)
(11.22)
(11.22)
(9.22)
(9.22)
A
A-.200
B
.250 (6.35)
.500
(12.70)
Ø .120 x2
Pin 1
.079 (2.00)
C
Straight
(0) †
.020
(.51)
.289 (7.34)
.020 (.51)
1.102 (28.00)
90° Left
(1) †
.020
(.51)
90° Both
(3) †
.289 (7.34)
.315
(8.00)
MAX.
.315
(8.00)
MAX.
.538
(13.71)
.020
(.51)
.290
(7.37)
.675 (17.15)
(.51)
.289 (7.34)
.289 (7.34)
.315
(8.00)
MAX.
.020
.290
(.51)
(7.37)
.850 (21.60)
.315
(8.00)
MAX.
.374
(9.50)
.020
(.51)
.385
(9.78)
.921 (23.40)
Double
Row .100 (2.54)
.500
(12.70)
.079
(2.00)
.079 (2.00)
.250
(6.35)
Ø .120 x2
.079 (2.00)
C
.020
(.51)
.210 (5.33)
.315
(8.00)
MAX.
.538
.020 (.51)
(13.71)
1.102 (28.00)
90° Both
(3) †
.020
(.51)
.315
(8.00)
MAX.
.675
(17.15)
.210 (5.33)
.020
(.51)
.290
(7.37)
.833 (21.16)
90° Left
(1) †
.020
(.51)
.315
(8.00)
MAX.
.020
(.51)
.385
.464
(9.78)
(11.79)
1.000 (25.40)
.453
(11.51)
.369
(9.37)
90° Right
(2) †
.020
(.51)
.210 (5.33)
.210 (5.33)
.453
(11.51)
.374
(9.50)
A
A-.200
B
Pin 1
Straight
(0) †
.374
(9.50)
90° Right
.020
(2) †
.020
(.51)
.315
(8.00)
MAX.
.020
(.51)
.453
(11.51)
.290
(7.37)
.930 (23.62)
.369
(9.37)
Coining feature patented
† Refers to lead configuration for part number/ordering information
C
0.079
0.157
0.236
0.315
0.394
Dimensions: inches and (mm)
Lead Spacing: .079" (2.00 mm)
.100
(2.54)
B
2
3
4
5
6
1.060 *
(26.92)
Single
Row
52-971-XXX-XXX
* For plate widths 1.060 and 1.560 there will be no coining.
For these plates, increase dimensions to the right .020".
Thus, any dimension on left will be reduced by .020.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA12
Shrouded Latch Filter Plates
Shrouded Latch Filter Plates are an effective method
for combining an electronic interface and EMI solution
in one package. The shrouded latch incorporates the
bolt-in concept filter plate with the latching feature of
popular ribbon cable headers. This product is available
in pin counts of 10 through 64 positions. The latch is
available in a variety of standard heights.
The shrouded latch filter plate is ideal for securing and
protecting the filter element from exposure to mechanical
shock and vibration which could loosen the cable interface.
Mechanical Specifications
Base Plate
Material ............................ Brass UNS
............................................. C26000/C27000
Shrouded Latch Filter
Plate Advantages
Base Plate
Thickness .......................... .040" (1.0mm)
■
Available in 10 to 64 positions
■
Mates to most ribbon cable connectors
■
Variety of latch ejector heights available
Shrouded Material ......... Thermoplastic
■
Pins on .100" centers
............................................. Polyester UL94V-0
■
Reliable cable retention for high
vibration applications
Lead Material .................. Copper alloy
■
Mixed capacitance values and schematics available
■
Excellent filtering from 5 MHz to 1 GHz and beyond
■
Shroud protects filter elements from potential damage
■
Available in RoHS compliant versions
Plating ............................... Tin,
............................................. RoHS version will be silver
Lead Plating ................... Gold plate
Lead Diameter ................. ø .025" (0.6mm)
Current Rating ................ 5 Amps
Ordering Information
Example:
53-038-014-BS1
The part number shown represents a shrouded latch filter plate with
14 filtered lines. Filters are C style with a capacitance value of 100pF.
The plate has a short latch height and double shroud configuration.
53 -* 038 Shrouded Latch
Filter Plate
* Replace “–” with “F” for
RoHS complaint version
0
14 - B
Total Number
of Filtered Lines2 rows
10
14
16
20
24
26
30
34
40
44
50
60
64
Filter
Designation
A - T from
table on page
FA17. **
S
1
Latch Height
Configuration
S - Short .435" (11.0mm)
L - Long .575" (14.6mm)
1 - Double Shroud
2 - Single Shroud
3 - Single Shroud w/90°
bend opposite side
** To request selective line filtering, a mechanical configuration
or material specification not shown in this catalog, please complete
and forward the design inquiry form on page FA18. We will review
your request and provide you with a part number.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA13
Shrouded Latch Filter Plates
* Latch height
S .435 (11.05)
L .575 (14.61)
A
B
.100 (2.54) TYP.
Latch height*
.64 (16.25)
REF.
.47 (11.93) REF.
.100 (2.54)
1.00 (25.40)
2.40 (60.96)
REF.
(4.02) X 2
C
Part Number
Number of
Circuits
in
(mm)
in
(mm)
in
(mm)
53-038-010-XXX*
53-038-014-XXX
53-038-016-XXX*
53-038-020-XXX*
53-038-024-XXX
53-038-026-XXX
53-038-030-XXX
53-038-034-XXX
53-038-040-XXX*
53-038-044-XXX
53-038-050-XXX*
53-038-060-XXX
53-038-064-XXX*
10
14
16
20
24
26
30
34
40
44
50
60
64
2.00
2.20
2.30
2.50
2.70
2.80
3.00
3.20
3.50
3.70
4.00
4.50
4.70
(50.8)
(55.9)
(58.4)
(63.5)
(68.6)
(71.1)
(76.2)
(81.3)
(88.9)
(94.0)
(101.6)
(114.3)
(119.4)
1.10
1.30
1.40
1.60
1.80
1.90
2.10
2.30
2.60
2.80
3.10
3.60
3.80
(27.9)
(33.0)
(35.6)
(40.6)
(45.7)
(48.3)
(53.3)
(58.4)
(66.0)
(71.1)
(78.7)
(91.4)
(96.5)
1.58
1.78
1.88
2.08
2.28
2.38
2.58
2.78
3.08
3.28
3.58
4.08
4.28
(40.1)
(45.2)
(47.8)
(52.8)
(57.9)
(60.5)
(65.5)
(70.6)
(78.2)
(83.3)
(90.9)
(103.6)
(108.7)
* Indicates standard sizes
A
B
C
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA14
Custom Filter Plates
High Volume Industrial
As a long-term producer of filter plates for industrial
applications, API Technologies understands the cost
requirements of this market. In turn, we have established
a program to develop and manufacture custom designed
filter plates for cost sensitive industrial applications.
We have engineered a variety of capacitive only
filter elements that provide excellent RF isolation from
5 MHz to 1 GHz and beyond. To determine the available
capacitance values, contact API. Our technical staff will
work with you to develop a solution that meets your
system and budget needs.
Military/High Reliability
Improving the electromagnetic compliance (EMC) of
electronic systems is an area of intense focus within
the defense and avionics industries. To achieve this goal,
many companies are replacing discrete filter elements
and surface mount filters with feed-through filter plate
assemblies for higher frequency isolation.
API will custom design a filter plate that meets your
size, material and filtering requirements. We are capable
of providing stringent testing and analysis of our filter
plate assemblies to MIL-F-15733 and MIL-F-28861.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA15
Custom Capabilities
In addition to our custom filter plates, API Technologies’
Spectrum Control brand offers a number of value-added
features designed to complement your manufacturing
operation. Our marketing and engineering staff will
evaluate your design or manufacturing parameters
and develop a filter solution which provides increased
filtering performance economically.
API Capabilities
■
■
■
Custom assemblies with varying cable lengths and
impedances for high clock speeds associated with
digital electronics
Integrate a filter solution with other components
to ensure a completely functional device
Perform EMC evaluations on your equipment,
recommending proper placement of EMI/RFI
filtering components
Filtered Headers
Replace the unfiltered connector on your PC board with
API’s low cost filtered header. This innovative new product
allows you to meet EMC emissions and susceptibility
standards with minimal or no board change.
Filtered Headers
Flat Conductor Cables
Flat conductor cables are often selected as an effective
method of interconnection. API can save you time and
money by installing conductor cables to your filter plates.
Flat conductor cables are available in varying lengths,
conductor counts, and in several termination
configurations.
Easy Mate
.250 (6.36)
MIN.
X
Lead Stabilizer
API has developed a filter plate lead
stabilizer bar to protect leads during
installation and ensure proper
alignment to PCB.
.300 (7.63)
Bolt-in
Coining process
patented
.098 (2.49)
.540
(13.73)
.100
(2.54)
.062
(1.58)
.003 (.08)
L
100
(2.54)
A
Lead stabilizer
position can be
adjustable
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA16
Typical Insertion Loss
100
80
Insertion Loss (dB)
Filter Selection
EMI Filter Performance
C-Style Capacitor
I
H
60
G
F
40
A
20
The electrical characteristics table and insertion loss
graphs indicate the performance of feed-through capacitors
and Pi type filters. Utilize this information to specify the
EMI filtering components included in your filter plate.
B
C
0
E
0.1MHz
1MHz
10MHz
100MHz
Frequency
D
1GHz)
10GHz
100
T
Custom Filtering
API Technologies’ Spectrum Control line of filter plates are
engineered to accommodate selective line filtering. Several
different types of filters may be specified in a single, easy
to install filter plate, allowing you to facilitate a wide range
of filtering requirements.
For selective line filtering, provide a sketch indicating
the filters and positions required. The example below
represents a 10 pin, 2 row plate with six 1000 pF feedthrough capacitors and four 1700 pF Pi type filters.
Part Number
Based on front
view of plate
10
F
F
F
R
R
6
1
F
F
F
R
R
5
Filter**
Circuits
Value
S
Pi Capacitor
R
60
Q
40
L
M
N
20
O
P
0
0.1MHz
1MHz
10MHz
100MHz
Frequency
1GHz
10GHz
Above curves represent application of proper
grounding fundamentals, for assistance consult
with API.
Minimum Insertion Loss - Decibels (dB)
50 ohm system per MIL-STD-220 (no load)
Tolerance
3 dB Max
Cut-off
Frequency
(MHz)*
Working
Voltage DC
-55°C to
+125°C
5
MHz
10
MHz
20
MHz
50
MHz
100
MHz
200
MHz
500
MHz
1
GHz
Capacitance
Filter
Designation
Insertion Loss (dB)
80
A
68 pF
±20%
77
100V
—
—
—
—
—
3
10
16
B
100 pF
±20%
53
100V
—
—
—
—
1
6
14
19
C
135 pF
+100/-0%
23
100V
—
—
—
1
5
10
16
20
D
470 pF
±20%
11
100V
—
—
2
7
13
19
25
27
820 pF
±20%
6
100V
—
2
6
12
18
24
30
33
F
1000 pF
±20%
5
100V
—
3
7
14
20
26
32
35
G
1500 pF
±20%
3.5
100V
1
4
10
16
22
29
36
37
H
2500 pF
+100/-0%
1.3
100V
5
11
17
23
29
35
38
40
I
4000 pF
+100/-0%
.8
100V
9
15
21
27
34
38
42
46
Max.
635
100V
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1
6
17
23
2
9
22
28
E
C
J
Insulated
K
Grounded
Insert
10 pF
68 pF
±20%
65
M
100 pF
±20%
46
100V
—
—
—
—
N
135 pF
+100/-0%
25
100V
—
—
—
1
6
17
26
34
O
470 pF
±20%
11
100V
—
—
—
9
18
22
36
43
L
100V
820 pF
±20%
6
100V
—
—
4
13
23
31
45
52
Q
1000 pF
±20%
5
100V
—
2
7
16
24
36
51
59
R
1700 pF
+100/-0%
1.9
100V
1
6
14
28
35
49
64
69
S
2500 pF
+100/-0%
1.3
50V
4
9
16
28
41
54
70
70
T
5000 pF
+100/-0%
.7
100V
9
15
28
41
53
66
70
70
P
Pi
* 3 dB cut-off frequency calculated at the maximum capacitance.
** For Hi-Density centers (2 mm) only C style filters are available, to a maximum of 4000pF.
All high density capacitors
are 50 volts @ 125°C.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA17
Custom Filter Plates
Filter Plate Design Inquiry Form
General Information
Customer:
Location:
Address:
City:
State:
Contact:
Title:
Phone:
Fax:
Zip:
Project Information
Project name:
Annual usage:
Target price:
Intended application:
Quote quantity:
Function of circuit filter is used in:
Target cost:
Functional Detail NOTE: Bold lettering represents standard, readily available material (Circle the appropriate parameters needed)
Lead Diameter
0.020"
0.025"
0.032"
Total Lead Length
0.040"
0.700"
1.00"
1.102"
Lead Material
Phosphor Bronze
Lead Plating
Copper
Gold
Tin
Silver
Base Plate Material
Brass UNS C26000/C27000 Cold Rolled Steel (CRS) UNS G10080/G10180 Aluminum UNS A93003/A96061 Beryllium Copper*
* For Beryllium Copper, ask about our new “Easy Mate” Plate
Plate Thickness (± 0.002")
(0.010" for Easy Mate Jr.)
(0.020" for Bolt-in) 0.026"
(0.012" for Easy Mate)
Center-to-Center Spacing
(Not all capacitances available on all centers)
Plating of Base Plate
0.033" 0.041"
Tin
Silver
90/10 Solder
Standard (inch):
0.079
0.100
Metric (mm):
2
2.54
Nickel
Detailed Sketch and Comments Area
Include Mounting Detail
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA18
Barrier Strip
Filtered Terminal Blocks
The barrier strip filtered terminal block is designed to
provide excellent EMI/RFI filtering of AC and DC power
lines and control lines. This terminal block is available in
various sizes, with terminals for soldering or spade lugs.
Application examples include filtering power supplies
in telecommunications equipment, metering, industrial
controls, instrumentation and EDP equipment.
Mechanical Specifications
Center Spacing. . . . . . . . .438" (11.1 mm)
Features
Wire Size . . . . . . . . . . . . AWG #12 max for 20A
■
UL recognized and CSA approved for DC voltages
■
E133076, UL 1059
Screw Size . . . . . . . . . . . 20A - #6-32, zinc-plated
. . . . . . . . . . . . . . . . . . . philslot screws
■
LR92537, CSA STD 22.2 N°158-1987 and ECN584B
Molded Material. . . . . . . Black, UL rated 94VO thermoplastic
■
Filter element provides high insertion loss for EMI/RFI
filtering of AC and DC power and control lines
Tightening Torque . . . . . 9 in.-lbs. max.
■
Rugged construction provides protection to filtering
element; especially useful for repeated changes in
wiring or field connections
Electrical Specifications
■
2 to 6 terminals available (combine if larger number
of terminals needed)
Working Voltage. . . . . . . 100VDC
■
Cost-effective solution for industrial interconnection
EMI filtering problems
■
■
Termination options available: straight lead, male or
female disconnects, pigtail (12 AWG = 0.081" (2.05mm);
22 AWG = 0.025" (0.64mm)
Terminal . . . . . . . . . . . . Brass, tin-plated
Operating Temperature . . -55° C to 105° C
Capacitance . . . . . . . . . . 2,500 pF to 5,200 pF
Dielectric
Withstanding Voltage . . . 1700VDC
Current Rating. . . . . . . . 20A
D.C. Resistance . . . . . . . .01 ohms max.
Available in RoHS compliant versions
Typical Loss (dB) In 50 Ohm Circuit
Circuit Schematic
Pi Filter
Ordering Information
Example: 52-160-006-A AOO
Frequency
Insertion Loss (dB)
30 MHz
22
50 MHz
32
100 MHz
48
300 MHz
70
500 MHz
75
1000 MHz
75
The part number shown represents a barrier strip terminal block with
six terminals and rated for 20 Amps. Male disconnects (.250") are the
method of termination.
52 –* 160
–
006
–
A
Barrier Strip
Terminal Block
160 - Front panel mount
Number
Current
of Terminals
Rating
002 - 2 terminals through A - 20 Amps
188 - Rear panel mount
006 - 6 terminals
For instructions on soldering to filter terminals, please refer to
page FA4 in filter plate section.
* Replace “–” with “F” for RoHS complaint version
AOO
Dimensions
in inches (mm)
.758
(19.3)
®
.820
Special Terminations Code
(20.9)
Note: Leave blank if ordering
1.30
TYPICAL
(33.1)
standard product.
MAX.
.187 (4.8)-AO1
.250 (6.4)-AOO
Male quick disconnects
.032 (.8) THK.
directly on terminal block.
FOR BOTH
AO1 . . . . . . .187 (4.8)
For custom designs see page FA18
AOO . . . . . . .250 (6.4)
and consult with factory.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA19
Barrier Strip
Filtered Terminal Blocks
Front panel mount
A
Ø.19 thru (2X)
(4.8)
B
C
.56
(14.2)
.79
(20.1)
.40
(10.2)
.20
(5.1)
#6-32 WIRE
CLAMP
SCREWS
.438
(11.1)
.31
(7.9)
.032 (.81)
.38
(9.7)
.76
(19.3)
.65
(16.5)
GROUND
PLANE
.093 x 45° Chamfer x 4
20 Amps
€
€
Dimensions in inches (mm)
Part Number
Number of
Circuits
2
1.71
(43.4)
1.31
(33.3)
1.02
(25.9)
52-160-003-A
3
2.15
(54.6)
1.75
(44.5)
1.46
(37.1)
52-160-004-A
4
2.59
(65.8)
2.19
(55.6)
1.90
(48.3)
52-160-005-A
5
3.02
(76.7)
2.62
(66.5)
2.32
(58.9)
52-160-006-A
6
3.46
(87.9)
3.06
(77.7)
2.77
(70.4)
52-160-002-A
in.
A
.062
(1.6)
.032 (.81)
Ø.312
(7.9)
in.
(mm)
B
C
in.
(mm)
(mm)
Also available through API’s authorized European distributors/agents.
Rear panel mount
D
.275
(7.0)
#6-32UNC-2A THD
COMBO HEAD
SCREWS
B
.059
(1.5)
1.00
(25.4)
.212
(5.4)
(2X)
.415
(10.5)
GROUND
PLANE
.062 (1.6) X
.032 (.81)
A
C
20 Amps
.75
(19.0)
.65
(16.5)
.100 (2.54)
4-40 THREADED
THRU GROUNDING
STANDOFF (2X)
2
1.31
(33.3)
.438
(11.1)
1.86
(47.3)
1.02
(25.9)
52-188-003-A
3
1.75
(44.4)
.875
(22.2)
2.30
(58.4)
1.46
(37.1)
52-188-004-A
4
2.19
(55.6)
1.313
(33.3)
2.74
(69.5)
1.90
(48.3)
52-188-005-A
5
2.62
(66.6)
1.750
(44.4)
3.17
(80.6)
2.32
(58.9)
52-188-006-A
6
3.06
(77.7)
2.188
(55.6)
3.61
(91.7)
2.77
(70.4)
52-188-002-A
in.
(mm)
in.
C
Dimensions in inches (mm)
Number of
Circuits
(mm)
B
.062
(1.6)
.032 (.81) TYP.
Ø.312 TYP.
(7.9)
Part Number
in.
A
.80
(20.3)
(mm)
in.
D
(mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA20
250 Volt AC Rated
Filtered Terminal Blocks
API Technologies’ Spectrum Control line of filtered terminal
block provides superior EMI/RFI filtering of AC power and
control lines. This terminal block is available in various sizes,
with terminals for soldering, spade lugs, or wire pigtails.
Termination options available: straight lead male or female
disconnects, or wire pigtails in lengths to your specification.
■
Features
■
■
■
■
Applications
■
UL recognized and CSA approved for AC voltages.
E133076, UL 1059.
LR92537, CSA STD 22.2 N°158-1987 and ECN584B.
Termination options available: straight lead, male
or female disconnects, pigtail (12 AWG-22 AWG).
■
■
■
■
■
■
■
■
.200
(5.08)
Specifications
C
.562
(14.28)
.650
(16.51)
B
A
Marking:
SCI
52-257-XXX-A
XXXX - Date Code
#6-32UNC-2A THD.
Philslot Screw
Zinc Plated
.093 x 45° Chamfer 4x
.32
(8.13)
.032 (.81)
.40
(10.16)
.27
(6.86)
.415
(10.5)
GROUND
PLANE
.062±.002
(1.57±.10)
Number of
Circuits
in.
52-257-002
2
52-257-003
Part Number
.810
(20.57)
A
ELECTRICAL
Operating Temperature:
Voltage Rating:
Current Rating:
Wire Range:
Torque:
Capacitance:
Dielectric
Withstanding Voltage:
MECHANICAL
Center Spacing:
Wire Size:
Screw Size:
Molded Material:
Tightening Torque:
Terminal Options:
.75
(19.05)
.031±.002
(.79±.05)
Ø.312
(7.9)
Metering equipment
Programmable controllers
Industrial process control
Heavy equipment controls
Power supplies
Regulators
Surge sensing equipment
Power factor correction
Telecommunications power management,
ATM, Sonet, etc.
Medical equipment
(mm)
in.
1.71
(43.4)
3
2.15
52-257-004
4
52-257-005
52-257-006
B
-55° C to +105° C
250VAC
20 Amps
12-22AWG
9 lb-in.
2000pF to 5200pF
1500VAC @ 25° C
.438” (11.1 mm)
AWG #12 max. for 20 Amp
20A - #6-32, zinc plated philslot
UL rated 94VO polyamide
9 in.-lbs. max.
straight lead, male or female
disconnects, pigtail
C
(mm)
in.
1.31
(33.3)
1.02
(25.9)
(54.6)
1.75
(44.5)
1.46
(37.1)
2.59
(65.8)
2.19
(55.6)
1.90
(48.3)
5
3.02
(76.7)
2.62
(66.5)
2.32
(58.9)
6
3.46
(87.9)
3.06
(77.7)
2.77
(70.4)
(mm)
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA21
PCB Mount
Filtered Terminal Blocks
The PCB mount filtered terminal block is designed to
provide excellent EMI/RFI filtering of low voltage DC power
lines and control lines. These new terminal blocks use a
unique screw clamp system with a wire protector which
provides for quick and easy installation. API’s Spectrum
Control line of PCB Mount terminal blocks can be used
for a variety of power supply filtering applications in
telecommunications equipment, metering, industrial
controls, instrumentation and EDP equipment.
Mechanical Specifications
Center Spacing. . . . . . . . US .200: (5.08 mm)
. . . . . . . . . . . . . . . . . . EURO .197" (5 mm)
Wire Size . . . . . . . . . . . . AWG 12 through 26
Screw Material . . . . . . . . Steel, zinc chromate plate
Features
■
Filter element provides high insertion loss for EMI/RFI
filtering of DC power and control lines
Recommended PCB
Hole Diameter . . . . . . . . 0.05" (1.30 mm) contact hole
■
Rugged construction provides protection to filtering
element; especially useful for repeated changes in
wiring or field connections
Molded Material. . . . . . . UL rated 94VO polyamide
Tightening Torque . . . . . 2.5 in.-lbs. max.
Terminal . . . . . . . . . . . . Brass, tin-plated
2 to 12 terminals available (combine if larger
number of terminals needed)
Electrical Specifications
■
Quick and easy PCB installation and maintenance
Operating Temperature . . -40° C to 80° C
■
Cost-effective solution for industrial interconnection
EMI filtering problems
Working Voltage. . . . . . . 100VDC
■
Selectively loaded filter pins to economically meet
exact filtering requirements
Dielectric
Withstanding Voltage . . . 707VDC
■
Available with European (5 mm) or US (.200") pin spacing
Current Rating. . . . . . . . 12 Amps max.
■
Available in RoHS compliant versions
D.C. Resistance . . . . . . . 0.01 ohms max.
■
Circuit Schematic
C Filter
Typical Loss (dB) In 50 Ohm Circuit
Ordering Information
Example: 52-227-006-L
The part number shown represents a low profile PCB
mount terminal block for thru-hole grounding with six terminals
(US spacing).
52
- * 227
Capacitance . . . . . . . . . . 2500 pF +80% / -20%
-
006
-
Frequency
Insertion Loss (dB)
10 MHz
10.4
50 MHz
23.9
100 MHz
29.9
500 MHz
43.9
1000 MHz
49.9
L
Number of
Low profile
terminals
sizing
002 - 2 terminals See page FA23
thru
012 - 12 terminals
* Replace “–” with “F” for RoHS complaint version
Terminal Block type
227 U.S. pin spacing
228 Metric pin spacing
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA22
PCB Mount
Filtered Terminal Blocks
US Pin Spacing
Part Number
Number of
Circuits
in.
2
.44
52-227-002
A
(mm)
.53
(13.5)
(11.2)
52-227-003
3
.64
(16.3)
52-227-004
4
.84
(21.4)
52-227-005
5
1.04
(26.5)
52-227-006
6
1.24
(31.5)
52-227-007
7
1.44
(36.6)
52-227-008
8
1.64
(41.7)
52-227-009
9
1.84
(46.8)
52-227-010
10
2.04
(51.9)
52-227-011
11
2.24
(57.0)
52-227-012
12
2.44
(62.0)
.30
(7.6)
.200 TYP.
(5.08)
.12
(3.05)
.03
(.76)
.20
(5.1)
Low Profile
To order add
-L- after part
number.
.315
(8.0)
.375
(9.5)
.515
(13.0)
A
.10 (2X)
(2.54)
Ø.040
(1.0)
.375
(9.5)
.350
(8.9)
For effective filtering,
the ground plane must
be soldered to the
printed circuit board.
.45
(11.4)
Ø.040
(1.0)
Dimensions in inches (mm)
Metric Pin Spacing
Number of
Circuits
in.
52-228-002
2
.43
(10.9)
52-228-003
3
.63
(16.0)
52-228-004
4
.83
(21.1)
52-228-005
5
1.02
(25.9)
52-228-006
6
1.22
(31.0)
52-228-007
7
1.42
(36.1)
52-228-008
8
1.61
(40.9)
52-228-009
9
1.81
(46.0)
52-228-010
10
2.00
(50.8)
52-228-011
11
2.20
(55.9)
52-228-012
12
2.40
(61.0)
Part Number
A
(mm)
.53
(13.5)
.30
(7.6)
.118
(3.0)
.197 TYP.
(5.0)
.03
(.76)
Low Profile
To order add
-L- after part
number.
.20
(5.1)
.315
(8.0)
.375
(9.5)
.515
(13.0)
A
.100(2X)
(2.5)
Ø.040
(1.0)
.350
(8.9)
.375
(9.5)
For effective filtering,
the ground plane must
be soldered to the
printed circuit board.
.39
(10.0)
Ø.040
(1.0)
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA23
Custom
Filtered Arrays
API Technologies’ Spectrum Control brand will custom
design a filter plate or terminal block that meets your size,
material and filtering requirements. We have engineered
a variety of capacitive only filter elements that provide
excellent RF isolation from 5 MHz to 1 GHz and beyond.
In addition, we are capable of providing stringent testing
and analysis of our filter plate or terminal block assemblies
to MIL-F-15733 and MIL-F-28861.
In addition to our standard and custom filter plates
and terminal blocks, we offer a number of value-added
features designed to complement your manufacturing
operation. Our marketing and engineering staff will
evaluate your design or manufacturing parameters and
develop a filter solution which provides increased filtering
performance economically.
API Capabilities
■
Custom assemblies with varying cable lengths
and terminations
■
Integrate a filter solution with other components
to ensure a completely functional device
■
Perform EMC evaluations on your equipment,
recommending proper placement of EMI/RFI
filtering components
■
Custom high reliability assemblies
Filtered Headers
Replace the unfiltered connector on your PC board with
API’s low cost filtered header. This innovative new product
allows you to meet EMC emissions and susceptibility
standards with minimal or no board change.
Flat Conductor Cables
Flat conductor cables are often selected as an effective
method of interconnection. API can save you time and
money by installing conductor cables to your filter plates.
Flat conductor cables are available in varying lengths,
conductor counts and in several termination configurations.
Lead Stabilizer
API Technologies’ Spectrum Control brand has developed
a filter plate lead stabilizer bar to protect leads during
installation and ensure proper alignment to PCB.
Easy Mate
Patent pending
Bolt-in
Coining process
patented
Lead stabilizer
position can be
adjustable
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA24
Custom Filtered
Terminal Blocks
Terminal Block Design Inquiry Form
API Technologies’ Spectrum Control brand can incorporate
EMI filters into a variety of terminal block designs. We offer
product variations from several terminal block manufacturers.
In addition to developing a filtering solution, we will add
custom wiring and terminations to meet your requirements.
API offers:
■ Unique package integration for customer
specific needs
■ Wide range of designs from numerous terminal
block manufacturers
■ Custom assemblies with varying cable lengths
and terminations
Terminal Block Design Inquiry Form
General Information
Customer:
Location:
Address:
City:
State:
Contact:
Title:
Phone:
Fax:
Zip:
Project Information
Project name:
Annual usage:
Intended application:
Quote quantity:
Function of circuit filter is used in:
Target cost:
Target price:
Detailed Sketch and Comments Area
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FA25