New Product Sales Sheet SL Series Power Distribution Modules Integrated fuse block and bi-stable switching relay with sealed plug outputs Provides main battery shutdown from a remote location Optional manual control knob switches high-amp circuits Three switched 30A to 200A MIDI® fuse locations Four unswitched 24-hour 1A-40A ATO® fuse locations Eliminates significant factory or field interconnections Ordering Information Part No. Description 880075 SL PDM 880076 SL PDM with knob PN 880075 with remote switching Features & Benefits High-amp circuits can be disconnected with remote switch SL PDM (PN 880075) or manual/remote switch SL PDM (PN 880076). Manual knob enables emergency battery disconnection or provides positive lock-out for vehicle servicing. ldeal for low-amp circuits including clock memory, alarms, tachograph, and Qualcomm modules; and for high-amp circuits such as vehicle control modules, inverters, and auxiliary circuits. Ignition protected to SAE J1171 and ISO 8846 for installation in a battery box, or on vehicles carrying hazardous loads. Water and dust-resistant to a modified IP69K, close range high pressure spray when installed in the appropriate manner. PN 880076 with remote switching and manual control Tin-plated copper studs provide maximum conductivity and significantly lower contact resistance. Stainless steel hardware provides superior corrosion resistance. Also available with pre-installed fuses to customer needs. These products are customer-limited. Please consult Littelfuse for details. Fuses sold separately. Littelfuse Commercial Vehicle Products D-651 Rev A Configurations PN 880076 (with M anualControlKnob) Control Power, Remote Switch Control, and Ground A B C D MOUNTING HOLES X2 12 TO DC LOADS TOUN-SWITCHED DC LOADS 3 TO SWITCHED DC LOADS Specifications 880075 & 880076 Notes Max total amperage rating 300A at 85°C / 240A at 105°C (1 x 4/0 input cable) Voltage (nominal) 12V DC Temperature range -50°C to 105°C Terminal stud size M8 x 1.25mm (accepts 5/16” and M8 terminals) Shock 50 G Vibration 8G Mounting holes 9mm (for M8 or 5/16” hardware) Weight PN 880075 1.4lbs (0.64kg) PN 880076 1.5lbs (0.68kg) MIDI fuse circuits Max continuous current (per circuit) 170A (85% of max fuse rating) Fuse amperages available 30-200A ATO fuse circuits Max continuous current (per circuit) 30A (85% of max fuse rating) Fuse amperages available 1-40A www.littelfuse.com/cvp