V ishay I n tertech n o l o g y, I n c . AND TEC I INNOVAT O L OGY 94SVPD N HN VISHAY OS-CON O 19 62-2012 Capacitors - High Voltage, High Temperature 94SVPD SMD Solid Aluminum Capacitors with Conductive Polymer Key Benefits • High-voltage, high-temperature in polymer technology • Improved characteristics with up to 125 ºC temperature capability and 35 V maximum voltage rating in a SMD package • Improved damp heat (steady state) 85 ºC x 85 % RH performance • High ripple current up to 3.8 A at 100 kHz and 105 ºC • Low ESR down to 28 mΩ at 100 kHz • RoHS-compliant, can support lead (Pb)-free reflow soldering (refer to datasheet for profile and maximum temperature) APPLICATIONS • Vehicle-mounted equipment (e.g., engine control, power management and conversion) • Industrial (SMPS, measurement and control, automation) • Telecom infrastructure Resources • Datasheet: 94SVPD - http://www.vishay.com/doc?90022 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 RoHS COMPLIANT e3 PRODUCT SHEET One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components 1/2 VMN-PT0188-1202 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Aluminum Solid Capacitors with Conductive Polymer V ishay I n tertech n o l o g y, I n c . FEATURES FEATURES I INNOVAT 94SVPD • Improved damp heat (steady state) 85 °C x 85 % RH performance • performance Suitable for use in smoothing circuits of vehicle-mounted • equipment, Suitable for industrial use in smoothing circuits equipment, etc. of vehicle-mounted equipment, etc. reflow (2) • equipment, This productindustrial can support lead (Pb)-free QUICK REFERENCE DATA QUICK REFERENCE DATA DESCRIPTION CONDITIONS CONDITIONS 120- Hz 120 Hz Hz after120 2 minutes after 2 minutes Solid Capacitors with at 100 kHz, + 20 °C at 100 kHz, + 20 °C 62-2012 (2) VALUE VALUE - 55 °C to + 125 °C - 55 M: °C ± to20 + 125 % °C M: ± 20 %ratings table ≤ values in standard ≤ values in standard ratings table ≤ values in standard ratings table Conductive values in standard - 55 °C ≤Polymer Z/Z20 °Cratings table 0.75 to 1.25 0.75 55 °C Z/Z20 °C 0.75to to1.25 1.0 +- 125 °C 0.75 to 1.0 + ΔC/C 125 °C Z/Z20 °C within ± 20 % ΔC/C withinan± initial 20 % standard tan δ 2 x or < than + 125 °C, 2000 h Endurance rated voltage applied tan or << than than an an initial initial standard standard ESRδ 22 xx or + 125 °C, 2000 h Endurance rated voltage applied ESR 2 x below or < than an initial standard CASE CODE LIST Leakage current an initial standard Leakage current belowwithin an initial ΔC/C ± 20standard % CAPACITANCE + 85 °C, 85 to 90RATED % RH, VOLTAGE (SURGE AT 125 °C) ΔC/C withinan± initial 20 % standard tan δ 2 x or < than 10.0 25.0 35.0 Damp heat(µF) (Steady state) + 85 °C, 1000 85 to h90 %16.0 RH, tan or << than than an an initial initial standard ESRδ 22 xx or standard (11.5) (18.4) (29.0) (40.0) rated voltage Damp heat (Steady state) 1000 happlied ESR 2 x below or < than an initial standard Leakage Current an initial standard rated voltage applied 8.2 E7 Leakage Current belowwithin an initial ΔC/C ± 10standard % 10 C6 ΔC/C ± 10 % standard tan δ 1.3 x or <within than an initial (VPS) F8standard Solder heat18 resistance (2) tan ESRδ 1.3 x or < than an initial (230 °C x 75 s) (VPS) Solder heat22 resistance (2) ESR 1.3 xbelow or < than an initial an initial standard E7 E12standard (230 °C x 75 s) Leakage Current (after belowvoltage an initialprocesing) standard 39 Leakage Current F8 (after voltage procesing) Notes 47 E12 F12 (1) If any doubt arises, measure the current after applying voltage (voltage treatment). Voltage Treatment: the rated voltage is applied (10 to Notes 56 C6 (1) 35 V) for 120 minutes at 125 ºC. If any doubt arises, measure the current after applying voltage (voltage treatment). Voltage Treatment: the rated voltage is applied (10 to (2) Refer 82 minutes at 125REFLOW E7 F12 35 V) for 120 ºC. to RECOMMENDED PROFILE for maximum temperatures (2) Refer to RECOMMENDED REFLOW PROFILE for maximum temperatures 94SVPD Vishay OS-CON DIMENSIONS in millimeters RECOMMENDED LAND PATTERN (dimensions in mm) DIMENSIONS in millimeters SIZE CODE 0.2 max. a Polarity marking (Cathode) L + 0.1 L-+0.4 0.1 -5.9 0.4 FREQUENCY COEFFICIENT FOR C6 6.3 5.9 E7 8.0 6.9 E7 8.0 120 Hz ≤ f < 6.9 FREQUENCY 1 kHz F8 10.0 7.9 F8 10.0 7.9 E12 8.0 COEFFICIENT 0.05 11.9 E12 8.0 11.9 F12 10.0 12.6 F12 10.0 12.6 SIZE CODE SIZEC6 CODE Ø D ± 0.5 Ø D6.3 ± 0.5 W ± 0.2 W 6.6 ± 0.2 C6 E7 F8 E12 F12 c 1.6 E7 2.8 11.1 1.9 F8 4.3 E12 L F12 L H ± 0.2 H 6.6 ± 0.2 2.8 8.3 8.3 110.3 kHz ≤ f < 10 kHz10.3 10.3 10.3 8.3 8.3 0.3 8.3 8.3 10.3 10.3 10.3 10.3 0.2 max. H H W 9.1 W RIPPLE 6.6CURRENT8.3 6.6 8.3 STANDARD RATINGS www.vishay.com 364 www.vishay.com 364 CASE PART CODE NUMBER (1) b 2.1 C6 Ø DØ D Series C6 size is PD Series E7, F8, E12, C6 size is PDF12 size is SVPD E7, F8, E12, F12 size is SVPD Polarity marking (Cathode) Case No. c 003 Case No. SVPD 003 Rated capacitance 47 SVPD a 35 Rated capacitance voltage 47 b 35 Rated voltage 4.3 C ± 0.2 C 7.3 ± 0.2 7.3 9.0 9.0 10 kHz ≤11.0 f < 100 kHz 11.0 9.0 0.7 9.0 11.0 11.0 For technical questions, contact: [email protected] ALLOWABLE RATED RIPPLE RIPPLE For technical questions, contact: [email protected] CURRENT MAX. CURRENT RATED ESR RATED VOLTAGE (100 k to CAP. (µF) 300 kHz) (V) 100 kHz (mA) (3) (mΩ) 105 °C < Tx ≤ 105 °C Tx ≤ 125 °C 13.1 P P C C DESCRIPTION Operating temperature range Operating temperature Capacitance tolerance range Capacitance tolerance Tangent of loss angle (tan δ) Tangent of loss angle Leakage current (µA/2(tan min)δ)(or less) (1) Leakage current (µA/2 min) (or less) (1) ESR Aluminum ESR Characteristics of impedance ratio at high and low of temperature Characteristics impedance ratio at high and low temperature Revision 08-Jul-08 Capacitors - High Voltage, High Temperature 94SVPD SMD Solid Aluminum Capacitors with Conductive Polymer • This product can support lead (Pb)-free reflow 19 O L OGY VISHAY OS-CON ND TE C HN A N • New OS-CON 94SVPD series provides O • New OS-CON 94SVPDwithseries improved characteristics up to provides 125 °C improved characteristics with35upV tomaximum 125 °C RoHS temperature capability and COMPLIANT temperature and 35 V maximum RoHS voltage rating capability in a SMD package COMPLIANT rating in aheat SMD(steady package • voltage Improved damp state) 85 °C x 85 % RH 11.1 (+) R 13.1 (+) R R R 0.8 0.6 to 1.9 1.9 1.9 P ± 0.2 P 2.1 ± 0.2 2.1 0.6 to 0.8 3.2 0.6 to100 0.8 kHz ≤ f < 500 3.2 4.6kHz 0.6 to 1.1 0.8 4.6 0.8 3.2 1 0.8 to 1.1 3.2 4.6 0.8 to 1.1 4.6 Document Number: 90022 Revision: 08-Jul-08 Document Number: 90022 08-Jul-08 MAX. Revision:MAX. TANGENT LEAKAGE OF LOSS CURRENT ANGLE (µA) (2) 94SVPD106X0025C6 25 10 65 474 1500 0.10 50 94SVPD566X0010C6 10 56 45 538 1700 0.12 112 94SVPD825X0035E7 35 8.2 70 400 1300 0.10 57 94SVPD226X0025E7 25 22 48 580 1835 0.10 110 94SVPD826X0016E7 16 82 40 670 2120 0.12 262 94SVPD186X0035F8 35 18 60 550 1800 0.10 126 94SVPD396X0025F8 25 39 45 664 2100 0.10 195 94SVPD226X0035E12 35 22 50 700 2300 0.12 154 94SVPD476X0025E12 25 47 30 943 2980 0.12 235 94SVPD476X0035F12 35 47 30 1150 3650 0.12 329 94SVPD826X0025F12 25 82 28 1202 3800 0.12 410 Notes (1) Capacitance tolerance: M ± 20 % (2) After 2 minutes (3) Tx: Ambient temperature Document Number: 90022 PRODUCT SHEET Revision: 08-Jul-08 For technical questions, contact: 2/2 [email protected] www.vishay.com VMN-PT0188-1202 365 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000