In-Line Cartridge Fuse Holders 155 Series Twist-Lock In-Line Holders for 3AG/AB Fuses RoHS Pb Product Characteristics 155 100U 155 100A Compatible Fuses For low voltage 3AG/AB or SFE Fuse Applications Electrical Intended for use at 32 volts or less with fuses rated up to 20 amperes when the proper spring is installed for fuse size. Molded Parts Black Thermoplastic (UL94 V-2). Body halves have a .14” diameter hole for insulated wire. Ambient Temperature –40ºC to +75ºC. Contact Rivet Brass. Nickel plating. Designed to accommodate #14 AWG stranded wire. Assembled Supplied with 19” loop of #14 AWG red vinyl insulated wire, SFE fuse (listed) with a spring in different lengths depending of the fuse size. Unassembled For assembly to #14 AWG wire. Options 150 215 is similar to 155 120A except no fuse is supplied. It is intended for use with 3AG fuses rated up to 20 amperes. In-Line Fuseholder Supplied with a spring in different lengths depending of the fuse size. Dimensions 55.63 (2.19") * Please refer to Fuseology section for information on proper fuseholder re-rating. ** Fuseholders with specific wire sizes and lengths are available on special order. 15.24 (.60") Additional Information Datasheet Resources Samples Ordering Information Unassembled Assembled Packaging Ordering Number Catalog Number For Fuse Size Ordering Number Catalog Number Fuse Installed - 155 100 All below 01550100Z* - - Bulk Pack (100 Pcs) 01550104ZXU 155 104U ¼” × 5/8” 01550104ZXA 155 104A SFE 4 Bulk Pack (100 Pcs - Assembled) (100 Pcs- Unassembled) 01550106ZXU 155 106U ¼” × ¾” 01550106ZXA 155 106A SFE 6 Bulk Pack (100 Pcs - Assembled) (100 Pcs- Unassembled) 01550109ZXU 155 109U ¼” × 7/8” 01550109ZXA 155 109A SFE 9 Bulk Pack (100 Pcs - Assembled) (100 Pcs- Unassembled) 01550114ZXU 155 114U ¼” × 1 1/16” 01550114ZXA 155 114A SFE 14 Bulk Pack (100 Pcs - Assembled) (100 Pcs- Unassembled) 01550120ZXU 155 120U ¼” × 1 ¼” 01550120ZXA 155 120A SFE 20 Bulk Pack (100 Pcs - Assembled) (100 Pcs- Unassembled) - - 01500215Z - - Bulk Pack (100 Pcs) ¼” × 1 1/16” ¼” × 1 ¼” * Supplied with 8” loop of #14 AWG red vinyl insulated wire and two springs in different lengths to accommodate SFE sized fuses. (Fuse not included) © 2015 Littelfuse, Inc. Specifications are subject change recommended. without notice. Specifications are subject to change without notice. Application testing istostrongly Revised: 06/17/15