Datasheet

NICHIA STS-DA1-2589E <Cat.No.150519>
NICHIA CORPORATION
SPECIFICATIONS FOR FULL COLOR LED
NESM180AT
● Pb-free Reflow Soldering Application
● RoHS Compliant
● RGB Sorted (RGB die lit separately.)
NICHIA STS-DA1-2589E <Cat.No.150519>
SPECIFICATIONS
(1) Absolute Maximum Ratings
Item
Absolute Maximum Rating
Symbol
Blue
Green
Unit
Red
Forward Current
IF
20
25
30
mA
Pulse Forward Current
IFP
70
80
100
mA
Reverse Voltage
VR
Power Dissipation
5
PD
64.4
V
95.5
72
mW
Total Power Dissipation
PTOT
69
mW
Operating Temperature
Topr
-30~85
°C
Storage Temperature
Tstg
Junction Temperature
TJ
-40~100
100
°C
100
100
°C
* Absolute Maximum Ratings at TA=25°C.
* IFP conditions with pulse width ≤10ms and duty cycle ≤10%.
* The absolute maximum Power Dissipation per die.
* The absolute maximum Power Dissipation in total per package.
(2) Initial Electrical/Optical Characteristics
Item
Symbol
Condition
Typ
Unit
Blue
Green
Red
2.9
3.5
2.1
V
-
-
-
µA
45
440
280
mcd
0.133
0.189
0.700
0.075
0.718
0.299
B IF=10mA
Forward Voltage
VF
G IF=20mA
R IF=20mA
B VR=5V
Reverse Current
IR
G VR=5V
R VR=5V
B IF=10mA
Luminous Intensity
IV
G IF=20mA
R IF=20mA
B IF=10mA
x
Chromaticity Coordinate
y
-
G IF=20mA
R IF=20mA
-
* Characteristics at TA=25°C.
* Luminous Intensity value as per CIE 127:2007 standard.
* Chromaticity Coordinates as per CIE 1931 Chromaticity Chart.
1
NICHIA STS-DA1-2589E <Cat.No.150519>
RANKS
Blue
Item
Green
Red
Unit
Rank
Min
Max
Rank
Min
Max
Rank
Min
Max
Forward Voltage
-
2.54
3.22
-
3.05
3.82
-
1.80
2.40
V
Reverse Current
-
-
50
-
-
50
-
-
50
µA
Luminous Intensity
BT
56
70
GT
460
580
RT
318
400
BS
44
56
GS
365
460
RS
252
318
BR
35
44
GR
290
365
RR
200
252
mcd
Color Ranks
Blue
Rank W1
Rank W2
x
0.139
0.129
0.145
0.152
x
0.129
0.113
0.134
0.145
y
0.035
0.050
0.072
0.056
y
0.050
0.080
0.105
0.072
Green
Rank G1m
Rank G2m
x
0.166
0.136
0.176
0.201
x
0.201
0.176
0.220
0.237
y
0.676
0.739
0.750
0.686
y
0.686
0.750
0.745
0.684
Red
Rank R8a
x
0.6718
0.6562
0.6873
0.7049
y
0.2982
0.3144
0.3126
0.2948
* Ranking at TA=25°C.
* Forward Voltage Tolerance: ±0.05V
* Luminous Intensity Tolerance: ±10%
* Chromaticity Coordinate Tolerance: ±0.01
* LEDs from the above ranks will be shipped.
The rank combination ratio per shipment will be decided by Nichia.
Luminous Intensity Ranks by Color Rank
Ranking by
Luminous Intensity
Ranking by
BR
BS
BT
GR
GS
GT
RR
RS
RT
Color Coordinates
W1
W2
G1m,G2m
R8a
2
NICHIA STS-DA1-2589E <Cat.No.150519>
CHROMATICITY DIAGRAM
0.9
520
530
0.8
540
510
0.7
550
G1m
G2m
560
0.6
570
500
0.5
y
580
590
0.4
600
0.3
490
R8a
610
620
630
0.2
480
W2
0.1
470
0.0
0.0
W1
460
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
x
3
NICHIA STS-DA1-2589E <Cat.No.150519>
OUTLINE DIMENSIONS
* 本製品はRoHS指令に適合しております。
This product complies with RoHS Directive.
管理番号 No.
NESM180A
STS-DA7-3419B
(単位 Unit:±0.2)
mm)
(単位 Unit: mm, 公差 Tolerance:
1.8
1.7
4
2
1
Blue
1.8
3
(1.55)
Green
(0.45) (0.45)
(1.45)
Red
0.85
(0.2)
Pin-1 Mark
0.4
1.05
0.4
(0.2)
項目 Item
内容 Description
パッケージ材質
Package Materials
黒色耐熱性ポリマー
Black Heat-resistant Polymer
封止樹脂材質
Encapsulating Resin
Materials
エポキシ樹脂（拡散剤入り）
Epoxy Resin(with diffuser)
電極材質
Electrodes Materials
金メッキ
Au-plated
質量
Weight
0.0050g(TYP)
2
K
Blue
K
Green
K
Red
3
A
1
4
* Redダイ、Blueダイ、Greenダイは アノード側に実装されています。
The Red, Blue and Green die are attached to the Anode side.
4
NICHIA STS-DA1-2589E <Cat.No.150519>
SOLDERING
• Recommended Reflow Soldering Condition(Lead-free Solder)
1 to 5°C per sec
260°CMax
10sec Max
Pre-heat
180 to 200°C
• Recommended Hand Soldering Condition
Temperature
350°C Max
Soldering Time
3sec Max
60sec Max
Above 220°C
120sec Max
● Recommended Soldering Pad Pattern
2.4
0.65
0.6
1.65
0.6
0.65
(単位 Unit: mm)
* Make sure that there are no issues with the type and amount of solder that is being used.
* This LED is designed to be reflow soldered on to a PCB. If dip soldered, Nichia cannot guarantee its reliability.
* Reflow soldering must not be performed more than twice. Hand soldering must not be performed more than once.
* If the LEDs are reflowed a second time, it is recommended to perform the second soldering as soon as the LEDs have cooled down
to room temperature naturally after the first soldering in order to avoid moisture absorption.
* Avoid rapid cooling. Ramp down the temperature gradually from the peak temperature.
* Nitrogen reflow soldering is recommended. Air flow soldering conditions can cause optical degradation,
caused by heat and/or atmosphere.
* Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used.
It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
* When soldering, do not apply stress to the LED while the LED is hot.
* When using a pick and place machine, choose an appropriate nozzle for this product.
* This product can differ in optical characteristics depending on both the number of reflow cycles and reflow temperature conditions.
In a single display, only LEDs with both the same number of reflow cycles and reflow temperature conditions
should be used regardless of the application type (e.g. rental and/or permanent installations).
* The recommended soldering pad pattern is designed for attachment of the LED without problems.
When precise mounting accuracy is required, such as high-density mounting, ensure that the size and shape of the pad
are suitable for the circuit design.
* Consider factors such as the reflow soldering temperature, hand soldering temperature, etc. when choosing the solder.
* When flux is used, it should be a halogen free flux. Ensure that the manufacturing process is not designed in a manner
where the flux will come in contact with the LEDs.
* Make sure that there are no issues with the type and amount of solder that is being used.
5
NICHIA STS-DA1-2589E <Cat.No.150519>
TAPE AND REEL DIMENSIONS
Pin-1 Mark
4±0.1
0.2±0.05
Nxxx180x
STS-DA7-3437A
(単位 Unit: mm)
2.05 ±0.1
3.5 ±0.05
2±0.05
1.75 ±0.1
4±0.1
Φ1.5+0.1
-0
管理番号 No.
8 +0.3
-0.1
テーピング部 Tape
Φ1+0.2
-0
1.1±0.1
2.05±0.1
エンボスキャリアテープ
Embossed Carrier Tape
トレーラ部/リーダ部 Trailer and Leader
トップカバーテープ
Top Cover Tape
引き出し方向
Feed
Direction
トレーラ部最小160mm（空部）
Trailer 160mm MIN(Empty Pockets)
LED装着部
Loaded Pockets
引き出し部最小100mm（空部）
Leader with Top Cover Tape
100mm MIN(Empty Pocket)
リーダ部最小400mm
Leader without Top Cover Tape 400mm MIN
リール部 Reel
180+0
-3
11.4±1
9±0.3
* 数量は1リールにつき 3500個入りです。
Reel Size: 3500pcs
Φ
* JIS C 0806電子部品テーピングに準拠しています。
The tape packing method complies with JIS C 0806
(Packaging of Electronic Components on Continuous Tapes).
±
21
±0.2
ラベル
Label
Φ
13 ±
0.
2
f 13
.8
Φ60 +1
-0
8
0.
f2
1 ±0
* 実装作業の中断などでエンボスキャリアテープをリールに巻き取る場合、
エンボスキャリアテープを強く(10N以上)締めないで下さい。
LEDがカバーテープに貼り付く可能性があります。
When the tape is rewound due to work interruptions,
no more than 10N should be applied to
the embossed carrier tape.
The LEDs may stick to the top cover tape.
6
NICHIA STS-DA1-2589E <Cat.No.150519>
PACKAGING - TAPE & REEL
シリカゲルとともにリールをアルミ防湿袋に入れ、熱シールにより封をします。
Reels are shipped with desiccants in heat-sealed moisture-proof bags.
管理番号 No.
Nxxxxxxx
STS-DA7-0006C
ラベル Label
リール
Reel
シリカゲル
Desiccants
XXXX LED
TYPE Nxxxxxxx
*******
LOT YMxxxx-RRR
QTY.
PCS
RoHS
NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN
熱シール
Seal
アルミ防湿袋
Moisture-proof Bag
アルミ防湿袋を並べて入れ、ダンボールで仕切ります。
Moisture-proof bags are packed in cardboard boxes
with corrugated partitions.
ラベル Label
XXXX LED
TYPE Nxxxxxxx
*******
RANK RRR
PCS
QTY.
RoHS
NICHIA CORPORATION
491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN
Nichia
LED
* 客先型名を*******で示します。
客先型名が設定されていない場合は空白です。
******* is the customer part number.
If not provided, it will not be indicated on the label.
* ロット表記方法についてはロット番号の項を
参照して下さい。
For details, see "LOT NUMBERING CODE"
in this document.
* ランク分けがない場合はランク表記はありません。
The label does not have the RANK field for
un-ranked products.
* 本製品はテーピングしたのち、輸送の衝撃から保護するためダンボールで梱包します。
Products shipped on tape and reel are packed in a moisture-proof bag.
They are shipped in cardboard boxes to protect them from external forces during transportation.
* 取り扱いに際して、落下させたり、強い衝撃を与えたりしますと、製品を損傷させる原因になりますので注意して下さい。
Do not drop or expose the box to external forces as it may damage the products.
* ダンボールには防水加工がされておりませんので、梱包箱が水に濡れないよう注意して下さい。
Do not expose to water. The box is not water-resistant.
* 輸送、運搬に際して弊社よりの梱包状態あるいは同等の梱包を行って下さい。
Using the original package material or equivalent in transit is recommended.
7
NICHIA STS-DA1-2589E <Cat.No.150519>
LOT NUMBERING CODE
Lot Number is presented by using the following alphanumeric code.
YMxxxx - RRR
Y - Year
Year
Y
2014
E
2015
F
2016
G
2017
H
2018
I
2019
J
M - Month
Month
M
Month
M
1
1
7
7
2
2
8
8
3
3
9
9
4
4
10
A
5
5
11
B
6
6
12
C
xxxx-Nichia's Product Number
RRR-Rank
* The label does not have the RANK field for un-ranked products.
8
NICHIA STS-DA1-2589E <Cat.No.150519>
DERATING CHARACTERISTICS
管理番号 No.
周囲温度-全許容損失特性
Ambient Temperature vs
Total Power Dissipation
BLUE
GREEN
RED
150
120
120
全許容損失
(40, 95.5)GREEN
90
(40, 72.0)RED
(44, 64.4)BLUE
60
**
Derating2
150
(85, 23.0)GREEN
30
Total Power Dissipation(mW)
許容損失
Power Dissipation(mW)
周囲温度-許容損失特性
*
Ambient Temperature vs
Power Dissipation
Derating1
NESM180A
STS-DA7-3350
90
(40, 69.0)
60
30
(85, 18.0)RED
(85, 17.0)
(85, 17.0)BLUE
0
0
0
20
40
60
80
100
120
0
20
40
60
80
周囲温度
周囲温度
Ambient Temperature(°C)
Ambient Temperature(°C)
デューティー比-許容順電流特性
Duty Ratio vs
Allowable Forward Current
100
120
T A =25°C
Duty
BLUE
GREEN
RED
許容順電流
Allowable Forward Current(mA)
1000
100
80
70
30
25
20
10
1
10
100
デューティー比
Duty Ratio(%)
*
多色点灯の際も、1素子当たりの値はこの定格内におさめて下さい。
The graph shows the maximum allowable power dissipation for a LED die of each color.
**
2素子以上点灯の際は、トータル値を定格内におさめて下さい。
The graph shows the maximum allowable total power dissipation for a LED package.
9
NICHIA STS-DA1-2589E <Cat.No.150519>
OPTICAL CHARACTERISTICS
* 本特性は参考です。
All characteristics shown are for reference only and are not guaranteed.
発光スペクトル
Spectrum
管理番号 No.
NESM180A
STS-DA7-3351
Spectrum
相対発光強度
Relative Emission Intensity(a.u.)
1.0
TA =25°C
BLUE( IF=10mA)
GREEN(IF=20mA)
RED( IF=20mA)
0.8
0.6
0.4
0.2
0.0
400
450
500
550
600
650
700
波長
Wavelength(nm)
指向特性
Directivity
Directivity1
X-X
-20°
-10°
0°
10°
20°
40°
-40°
放射角度
Radiation Angle
TA =25°C
30°
-30°
-50°
BLUE( IFP= 10mA)
GREEN(IFP= 20mA)
RED( IFP= 20mA)
50°
-60°
Y(90°)
60°
-70°
-80°
Y(-90°)
80°
-90°
X
(90°)
X
(-90°)
70°
90°
1
0.5
0
0.5
1
相対光度
Relative Luminosity(a.u.)
Directivity2
Y-Y
-20°
-30°
-10°
0°
10°
20°
-40°
放射角度
Radiation Angle
TA =25°C
30°
40°
-50°
BLUE( IFP= 10mA)
GREEN(IFP= 20mA)
RED( IFP= 20mA)
50°
-60°
60°
-70°
70°
-80°
80°
-90°
90°
1
0.5
0
相対光度
Relative Luminosity(a.u.)
0.5
1
10
NICHIA STS-DA1-2589E <Cat.No.150519>
FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS
* 本特性は参考です。
All characteristics shown are for reference only and are not guaranteed.
順電圧-順電流特性
Forward Voltage vs
Forward Current
TA=25°C
VfIf
BLUE
GREEN
RED
管理番号 No.
周囲温度-順電圧特性
Ambient Temperature vs
Forward Voltage
TaVf
BLUE
IFP=10mA
GREEN IFP=20mA
IFP=20mA
RED
5.0
100
80
70
NESM180A
STS-DA7-3352
順電圧
Forward Voltage(V)
順電流
Forward Current(mA)
4.5
20
10
4.0
3.5
3.0
2.5
2.0
1
1.5
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
-60 -40 -20
順電圧
Forward Voltage(V)
Ambient Temperature vs
Relative Luminosity
6
1.6
5
1.4
相対光度
Relative Luminosity(a.u.)
相対光度
Relative Luminosity(a.u.)
40
60
80
100 120
周囲温度-相対光度特性
BLUE
GREEN
RED
IfIv
20
周囲温度
Ambient Temperature(°C)
TA=25°C
順電流-相対光度特性
Forward Current vs
Relative Luminosity
0
4
3
2
1
IFP=10mA
GREEN IFP=20mA
IFP=20mA
RED
TaIv BLUE
1.2
1.0
0.8
0.6
0
0.4
0
20
40
60
80
順電流
Forward Current(mA)
100
120
-60 -40 -20
0
20
40
60
80
100 120
周囲温度
Ambient Temperature(°C)
11
NICHIA STS-DA1-2589E <Cat.No.150519>
RELIABILITY
(1) Tests and Results
Reference
Test
Standard
Resistance to
Test
Test Conditions
Duration
JEITA ED-4701
Tsld=260°C, 10sec, 2reflows,
300 301
Precondition: 30°C, 70%RH, 168hr
JEITA ED-4701
-40°C(30min)~25°C(5min)~
100 105
100°C(30min)~25°C(5min)
Moisture Resistance
JEITA ED-4701
25°C~65°C~-10°C, 90%RH,
(Cyclic)
200 203
24hr per cycle
High Temperature
JEITA ED-4701
Storage
200 201
Temperature Humidity
JEITA ED-4701
Storage
100 103
Low Temperature
JEITA ED-4701
Storage
200 202
Soldering Heat
(Reflow Soldering)
Temperature Cycle
Failure
Criteria
#
Units
Failed/Tested
#1
0/22
100cycles
#1
0/22
10cycles
#1
0/22
TA=100°C
500hours
#1
0/22
TA=60°C, RH=90%
500hours
#1
0/22
TA=-40°C
500hours
#1
0/22
500hours
#1
0/22
300hours
#1
0/22
500hours
#1
0/22
B IF=5mA
Room Temperature
TA=25°C
Operating Life
G IF=7mA
R IF=7mA
B IF=2mA
Temperature Humidity
60°C, RH=90%
Operating Life
G IF=3mA
R IF=3mA
B IF=5mA
Low Temperature
TA=-30°C
Operating Life
G IF=7mA
R IF=7mA
NOTES:
Measurements are performed after allowing the LEDs to return to room temperature.
(2) Failure Criteria (Value for one LED device (Single color).)
Criteria #
Items
Conditions
Failure Criteria
B IF=10mA
Forward Voltage(VF)
G IF=20mA
>U.S.L.×1.1
R IF=20mA
B IF=10mA
#1
Luminous Intensity(IV)
G IF=20mA
<L.S.L×0.7
R IF=20mA
B VR=5V
Reverse Current(IR)
G VR=5V
>U.S.L.×2.0
R VR=5V
U.S.L. : Upper Specification Limit
L.S.L. : Lower Specification Limit
12
NICHIA STS-DA1-2589E <Cat.No.150519>
CAUTIONS
(1) Storage
Conditions
Storage
Temperature
Humidity
Time
Before Opening Aluminum Bag
≤30°C
≤90%RH
Within 1 Year from Delivery Date
After Opening Aluminum Bag
≤30°C
≤70%RH
≤168hours
65±5°C
-
≥24hours
Baking
● Product complies with JEDEC MSL 3 or equivalent. See IPC/JEDEC STD-020 for moisture-sensitivity details.
● Absorbed moisture in LED packages can vaporize and expand during soldering, which can cause interface delamination
and result in optical performance degradation. Products are packed in moisture-proof aluminum bags
to minimize moisture absorption during transportation and storage.
Included silica gel desiccants change from blue to red if moisture had penetrated bags.
● After opening the moisture-proof aluminum bag, the products should go through the soldering process
within the range of the conditions stated above. Unused remaining LEDs should be stored with silica gel desiccants
in a hermetically sealed container, preferably the original moisture-proof bags for storage.
● After the “Period After Opening” storage time has been exceeded or silica gel desiccants are no longer blue,
the products should be baked. Baking should only be done once.
● The leads or electrode pads (anode and cathode) of the product are plated with silver. Exposure to a corrosive environment
might cause the silver plated the leads or electrode pads to tarnish, and thus leading to difficulties in soldering.
If unused LEDs remain, they must be stored in a hermetically sealed container.
Nichia recommends using the original moisture-proof bag for storage.
● Do not use sulfur-containing materials in commercial products. Some materials, such as seals and adhesives, may contain sulfur.
The extremely corroded or contaminated plating of LEDs might cause an open circuit. Silicone rubber is recommended
as a material for seals. Bear in mind, the use of silicones may lead to silicone contamination of electrical contacts
inside the products, caused by low molecular weight volatile siloxane.
● To prevent water condensation, please avoid large temperature and humidity fluctuations for the storage conditions.
● Do not store the LEDs in a dusty environment.
● Do not expose the LEDs to direct sunlight and/or an environment where the temperature is higher than
normal room temperature.
13
NICHIA STS-DA1-2589E <Cat.No.150519>
(2) Directions for Use
● In designing a circuit, the current through each LED die must not exceed the Absolute Maximum Rating current
specified for each die.
It is recommended that each LED die is driven at a constant current.
● When having the two or more dice within this product on at the same time, the total power dissipation for the LED package
must be within the absolute maximum value specified in this specification.
● This product should be operated using forward current. Ensure that the product is not subjected to
either forward or reverse voltage while it is not in use. In particular, subjecting it to continuous reverse voltage
may cause migration, which may cause damage to the LED die. When used in displays that are not used for a long time,
the main power supply should be switched off for safety.
● It is recommended to operate the LEDs at a current greater than 10% of the sorting current to stabilize the LED characteristics.
● Care must be taken to ensure that the reverse voltage will not exceed the Absolute Maximum Rating
when using the LEDs with matrix drive.
● Ensure that excessive voltages such as lightning surges are not applied to the LEDs.
● Aging is recommended for detecting manufacturing and assembly defects. In particular, ensure that excessive current
and/or voltage is not applied to the LEDs. This aging should be conducted in environments where water condensation
does not occur.
● This product can be used in indoor applications; however, when the LEDs are used in the following environments,
incorporate sufficient measures into the display to prevent debris, water/moisture and gases
that will adversely affect the product.
- where water vapor is abundant
- where water condensation is likely to occur
- where water is likely to splash onto the LEDs
- where frost is likely to form on the surface of the LEDs (e.g. freezer, ice skating rink, etc.)
- where dust, dirt, debris, loose metallic materials and/or gases that will adversely affect the product are present
● In areas where hydrogen sulfide, which is a sulfide-based gas, is present (e.g. hot springs and volcanic areas),
and where salt is abundant (e.g. coastal areas), the life may be shortened.
● When this product is used for displays that will be installed outside: the LEDs should be covered to avoid exposure
to outdoor environments in conjunction with sufficient measures against direct sunlight, wet or damp conditions,
and salt damage.
● When power is applied for the first time after installation, the display should not be powered at 100% wattage
since the LEDs may have absorbed moisture. Before normal use of this display, operate the display at approximately 20% wattage
for an initial time period.
● If the display units will be rented, those units should be selected carefully to ensure that the display as a whole
will appear the same color and brightness.
● If the display units are loaded onto and/or transported by ship, the damp environment on the vessel will cause condensation;
the display units should be packaged to prevent moisture absorption.
● If a display that has been, or is being, used is relocated, it is possible that degradation of the LED has occurred.
When transporting this display, provide sufficient protection for the LEDs in addition to the moisture-proof packaging
for the display. When this display is reinstalled, ensure to follow the installation instructions for environments and use.
(3) Handling Precautions
● Do not handle the LEDs with bare hands as it will contaminate the LED surface and may affect the optical characteristics:
it might cause the LED to be deformed and/or the wire to break, which will cause the LED not to illuminate.
The lead could also cause an injury.
● When handling the product with tweezers, be careful not to apply excessive force to the resin.
Otherwise, The resin can be cut, chipped, delaminate or deformed, causing wire-bond breaks and catastrophic failures.
● Dropping the product may cause damage.
● Do not stack assembled PCBs together. Failure to comply can cause the resin portion of the product to be cut, chipped,
delaminated and/or deformed. It may cause wire to break, leading to catastrophic failures.
14
NICHIA STS-DA1-2589E <Cat.No.150519>
(4) Design Consideration
● PCB warpage after mounting the products onto a PCB can cause the package to break.
The LED should be placed in a way to minimize the stress on the LEDs due to PCB bow and twist.
● The position and orientation of the LEDs affect how much mechanical stress is exerted on the LEDs placed near the score lines.
The LED should be placed in a way to minimize the stress on the LEDs due to board flexing.
● Board separation must be performed using special jigs, not using hands.
(5) Electrostatic Discharge (ESD)
● The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.
When handling the products, the following measures against electrostatic discharge are strongly recommended:
Eliminating the charge
Grounded wrist strap, ESD footwear, clothes, and floors
Grounded workstation equipment and tools
ESD table/shelf mat made of conductive materials
● Ensure that tools (e.g. soldering irons), jigs and machines that are being used are properly grounded and
that proper grounding techniques are used in work areas. For devices/equipment that mount the LEDs,
protection against surge voltages should also be used.
● If tools or equipment contain insulating materials such as glass or plastic,
the following measures against electrostatic discharge are strongly recommended:
Dissipating static charge with conductive materials
Preventing charge generation with moisture
Neutralizing the charge with ionizers
● The customer is advised to check if the LEDs are damaged by ESD
when performing the characteristics inspection of the LEDs in the application.
Damage can be detected with a forward voltage measurement or a light-up test at low current (≤1mA).
● LEDs with ESD-damaged dice (i.e. other than red) may have an increased leakage current, current flow at a low voltage,
or no longer illuminate at a low current.
Failure Criteria: VF<2.0V at IF=0.5mA
(6) Thermal Management
● Proper thermal management is an important when designing products with LEDs. LED die temperature is affected
by PCB thermal resistance and LED spacing on the board. Please design products in a way that the LED die temperature
does not exceed the maximum Junction Temperature (TJ).
● Drive current should be determined for the surrounding ambient temperature (TA) to dissipate the heat from the product.
(7) Cleaning
● The LEDs should not be cleaned with water, benzine, and/or thinner.
● If required, isopropyl alcohol (IPA) should be used. Other solvents may cause premature failure to the LEDs
due to the damage to the resin portion. The effects of such solvents should be verified prior to use.
In addition, the use of CFCs such as Freon is heavily regulated.
● When dust and/or dirt adheres to the LEDs, soak a cloth with Isopropyl alcohol (IPA), then squeeze it before wiping the LEDs.
● Ultrasonic cleaning is not recommended since it may have adverse effects on the LEDs
depending on the ultrasonic power and how LED is assembled.
If ultrasonic cleaning must be used, the customer is advised to make sure the LEDs will not be damaged prior to cleaning.
15
NICHIA STS-DA1-2589E <Cat.No.150519>
(8) Eye Safety
● In 2006, the International Electrical Commission (IEC) published IEC 62471:2006 Photobiological safety of lamps
and lamp systems, which added LEDs in its scope.
On the other hand, the IEC 60825-1:2007 laser safety standard removed LEDs from its scope.
However, please be advised that some countries and regions have adopted standards
based on the IEC laser safety standard IEC 60825-1:20112001, which still includes LEDs in its scope.
Most of Nichia's LEDs can be classified as belonging into either the Exempt Group or Risk Group 1.
High-power LEDs, that emit light containing blue wavelengths, may be classified as Risk Group 2.
Please proceed with caution when viewing directly any LEDs driven at high current, or viewing LEDs
with optical instruments which may greatly increase the damages to your eyes.
● Viewing a flashing light may cause eye discomfort. When incorporating the LED into your product,
please be careful to avoid adverse effects on the human body caused by light stimulation.
(9) Others
● The LEDs described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment,
communications equipment, measurement instruments and household appliances).
Consult Nichia's sales staff in advance for information on the applications in which exceptional quality
and reliability are required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or
health (such as for airplanes, aerospace, submersible repeaters, nuclear reactor control system, automobiles,
traffic control equipment, life support systems and safety devices).
● The customer shall not reverse engineer by disassembling or analysis of the LEDs without having prior written consent
from Nichia. When defective LEDs are found, the customer shall inform Nichia directly before disassembling or analysis.
● The specifications and appearance of this product may change without notice;
Nichia does not guarantee the contents of this specification. Both the customer and Nichia
will agree on the official specifications of supplied products before the volume production of a program begins.
16