Reed Sensors Firecracker > 59030 59030 Miniature Firecracker Reed Sensor + 57030 Actuator Description The 59030 is a miniature cylindrical reed sensor 1.38mm (L) x 6.22mm (Dia) (1.50” x 0.245”) with a choice of normally open, normally closed, and change -over contacts. It is capable of switching up to 265Vac/300Vdc at 10VA. It functions best with the 57030-000 actuator. Note: The 57030 Actuator is sold separately. Features • Two-part magnetically operated proximity sensor • Hermetically sealed contacts • Operates through non-ferrous materials such as wood, plastic or aluminum Agency Approvals • Customer defined sensitivity option • Choice of cable length and connector Benefits Agency Agency File Number E61760 Note: Contact Littelfuse for specific agency approval ratings. Dimensions • Well suited for usage in highmoisture and contaminated environments • Non-contact solution, aesthetically more appealing than push-button or lever mechanical-type switches • Ideal for battery-powered applications as the contacts do not draw power when in the nonactivated state • Reed contacts last for millions of operating cycles under microcontroller logic level loads Applications Dimensions in mm (inch) • Position and Limit Sensing • Security Systems • Level Sensing • Linear Actuators A A B C A Nom. B Nom. C Nom. 57030 Actuator 6.22 (.245) 38.10 (1.50) -- 59030 Sensor 6.22 (.245) 38.10 (1.50) Cable Length ± 10.00 (.393) © 2015 Littelfuse Revised: 10/29/15 Specifications are subject to change without notice. littelfuse.com Reed Sensors Firecracker > 59030 59030 Miniature Firecracker Reed Sensor + 57030 Actuator Electrical Ratings Contact Type Switch Type Contact Rating Normally Open Normally Open HighVoltage Change Over Normally Closed 1 2 3 4 VA/Watt - max. 10 10 5 5 Vdc - max. Vac - max. Vdc - min. 200 140 250 300 265 400 175 120 200 175 120 200 Carry Adc - max. Aac - max. Adc - max. 0.5 0.35 1.2 0.4 0.30 1.4 0.25 0.18 1.5 0.25 0.18 1.5 Contact, Initial Insulation Ω - max. Ω - min. 0.2 1010 0.2 1010 0.2 109 0.2 109 Capacitance Contact pF - typ. 0.3 0.2 0.3 0.3 Temperature Operating °C -40 to +105 -20 to +105 -40 to +105 -40 to +105 ms - max. 1.0 1.0 3.0 3.0 Voltage 4 Current 4 1 Switching 2 Breakdown Switching Resistance 5 3 2 Product Characteristics Operate Time 6 Release Time 6 Shock 7 Vibration ms - max. 1.0 1.0 3.0 3.0 11ms 1⁄2 sine G - max. 100 100 50 50 50-2000 Hz G - max. 30 30 30 30 7 Notes: 1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information. 2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details. 3. Breakdown Voltage - per MIL-STD-202, Method 301. 4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load. 5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens. 6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II). 7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202. 8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse. Sensitivity Options (Using 57030 Actuator) Select Option S T U Distance Pull-In AT Activate Distance Pull-In AT Activate mm (inch) mm (inch) Range Range Average Average Switch Type V Pull-In AT Range Activate Distance mm (inch) Average Pull-In AT Range Activate Distance mm (inch) Average 1 Normally Open 12-18 8.4 (.330) 17-23 6.6 (.260) 22-28 5.1 (.200) 27-33 4.0 (.157) 2 High Voltage -- -- 17-23 6.6 (.260) 22-28 5.1 (.200) 27-33 4.0 (.157) 3 Change Over 15-20 6.5 (.255) 20-25 4.9 (.193) 25-30 3.7 (.146) -- -- 4 Normally Closed 15-20 6.5 (.255) 20-25 4.9 (.193) 25-30 3.7 (.146) -- -- Note: 1. Pull-In AT Range: These AT values are the bare reed switch AT before modification. 2. The activation distance is average value on the final sensor assembly. Sensor Actuator D © 2015 Littelfuse Revised: 10/29/15 Specifications are subject to change without notice. littelfuse.com Reed Sensors Firecracker > 59030 59030 Miniature Firecracker Reed Sensor + 57030 Actuator Part Numbering System Cable Length Specification Sensor: Cable Type: 24 AWG 7/32 PVC 105°C UL1430/UL1569 Select Option Cable Length mm (inch) 02 300 (11.81) 59030 - 1 - X - XX - X Series Switch Type 01, 02, 03, or 04 Termination Specification Termination Options Select Option Sensitivity S,T, U, or V Description (Two-wire versions illustrated) A Tinned leads (6.4±0.76)mm F Untinned leads (6.4±0.76)mm E JST type XHP 2.5mm pitch Cable Length 02 Termination A, E, or F Actuator: 57030 - 000 Series Standard Actuator 000 Note: The 57030 Actuator is sold separately. Packaging Packaging Option Packaging Specification Bulk © 2015 Littelfuse Revised: 10/29/15 Specifications are subject to change without notice. Bulk Quantity 500 Quantity & Packaging Code N/A Taping Width N/A littelfuse.com